Object: W409 general column fabrication and bearing-plate rules; analytical note assembly
Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
structnote1014a-img1323-general-notesverified · printed
fabrication.columnMilling
MILL ALL COLUMNS AT BEARING PLATES AND SPLICES.Printed general rule at the same note witness as prior milling question; individual bearing interfaces, extents and tolerances unestablished.
IMG_1323 · W-409 · Locate on drawing ↗Drawing notation: MILL ALL COLUMNS AT BEARING PLATES AND SPLICES.
Printed general rule at the same note witness as prior milling question; individual bearing interfaces, extents and tolerances unestablished.
structnote1014a-img1323-general-notesverified · observed
splice.capPlateSymbol
CAP PLATES AT SPLICES INDICATED BY: [double horizontal rule with end marks]Literal printed note plus observed double-rule witness. Identifies source notation only; capplate thickness, local transform and physical instances remain open.
IMG_1323 · W-409 · Locate on drawing ↗Drawing notation: CAP PLATES AT SPLICES INDICATED BY: [double horizontal rule with end marks]
Literal printed note plus observed double-rule witness. Identifies source notation only; capplate thickness, local transform and physical instances remain open.
structnote1014a-img1323-general-notesverified · printed
fabrication.bearingPlateMillingThicknessThreshold
MILL TOPS OF BEARING PLATES. 2″ AND OVER IN THICKNESS.2 in
Conditional general fabrication threshold; never an installed bearing-plate thickness.
IMG_1323 · W-409 · Locate on drawing ↗Drawing notation: MILL TOPS OF BEARING PLATES. 2″ AND OVER IN THICKNESS.
Conditional general fabrication threshold; never an installed bearing-plate thickness.
structnote1014a-img1323-general-notesverified · printed
fabrication.bearingPlateTopMillingRule
MILL TOPS OF BEARING PLATES. 2″ AND OVER IN THICKNESS.The tops, not an arbitrary entire assembly, are the stated machining face. Installation compliance remains unsupplied.
IMG_1323 · W-409 · Locate on drawing ↗Drawing notation: MILL TOPS OF BEARING PLATES. 2″ AND OVER IN THICKNESS.
The tops, not an arbitrary entire assembly, are the stated machining face. Installation compliance remains unsupplied.
structnote1014a-img1323-general-notesverified · printed
fabrication.largeRivetMaterialThicknessThreshold
RIVETS ⅞″ FOR ALL COLUMNS WITH COVER PLATES AND OTHER COLUMNS WITH MATERIAL ⅝″ OR GREATER.0.625 in
Threshold for other columns under the printed rivet rule; cover-plate condition is an independent clause. No material grade or column dimensions inferred.
IMG_1323 · W-409 · Locate on drawing ↗Drawing notation: RIVETS ⅞″ FOR ALL COLUMNS WITH COVER PLATES AND OTHER COLUMNS WITH MATERIAL ⅝″ OR GREATER.
Threshold for other columns under the printed rivet rule; cover-plate condition is an independent clause. No material grade or column dimensions inferred.
structnote1014a-img1323-general-notesverified · printed
fabrication.otherColumnRivetDiameter
¾″ RIVETS FOR ALL OTHER COLUMNS0.75 in
General conditional source rule; historical allocation to every column not audited.
structnote1014a-img1323-general-notesverified · printed
basePlate.specialDetailApplicability
BASE PLATE FOR COLS. 1,12,85 & 96Printed list refers to the distinct depicted detail. Nominal list membership does not establish four physically accepted baseplate solids.
IMG_1323 · W-409 · Locate on drawing ↗Drawing notation: BASE PLATE FOR COLS. 1,12,85 & 96
Printed list refers to the distinct depicted detail. Nominal list membership does not establish four physically accepted baseplate solids.
structnote1014a-img1323-general-notesverified · printed
basePlate.ePrimeCompanion
FOR E′ SEE SH.411Companion direction in the exterior-column baseplate plan. E′ has no numeric value established by this note; do not close first-column-c4-baseplate-e-prime.
IMG_1323 · W-409 · Locate on drawing ↗Drawing notation: FOR E′ SEE SH.411
Companion direction in the exterior-column baseplate plan. E′ has no numeric value established by this note; do not close first-column-c4-baseplate-e-prime.