Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.
464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.
Download the structured register (JSON)Sheet number unresolved
Extraction: Reviewed · extraction partial. Partial Room 607 library millwork audit: sheet identity/title; four wall-elevation identities; selected south-wall dimensions; wood grain/color instruction; library-side door finish; mould/base/nosing relationships; lower-track presence; hardware-lug rebate coordination. Partial timed visual review: Source-local condition only; no installed dimensions, quantities or wall transforms accepted. Partial timed visual review: Bounded follow-up of remaining regions; prior verified readings reused rather than duplicated. No full extraction or physical geometry acceptance. Partial timed visual review: Source-local library profile controls only; no installed dimensions or transforms. Partial timed visual review: Partial regional review; prior closed properties reused. Each new numeric value is source-local only; no building coordinate, installed total or geometry approval follows. Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: P-profile numeral/fraction follow-up; no overlap-derived correction. Partial timed visual review: undefined
Loading the selected drawing…
Scroll or pinch to inspect this drawing. Archival drawing photograph · Oregon Historical Society research collections.
Open source image separately ↗Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
Wood is explicit; species, grade and veneer/solid allocation remain unresolved. Source audit state: verified. Physical geometry gate failed.
Drawing notation: MATCH GRAIN & COLOR OF WOOD
Room 607 library millwork drawing extraction.
1 count
The selection relationship is established; exact board/veneer sequencing is not. Source audit state: verified. Physical geometry gate failed.
Drawing notation: NOTE — MATCH GRAIN & COLOR OF WOOD
Room 607 library millwork drawing extraction.
Profile dimensions remain untranscribed. Source audit state: verified-normalized-text. Physical geometry gate failed.
Drawing notation: THESE MOULDS TO ALSO BE MOULD & TOP MOULD OF BASE BELOW NOSING
Room 607 library millwork drawing extraction.
The exact stool instance remains unresolved. Source audit state: verified. Physical geometry gate failed.
Drawing notation: OMIT MOULD ACROSS STOOL
Room 607 library millwork drawing extraction.
1 count
No track size or quantity is inferred. Source audit state: verified-presence-partial-transcription. Physical geometry gate failed.
Drawing notation: LOWER TRACKS TO BE IN ...
Room 607 library millwork drawing extraction.
1 count
Source audit state: verified. Physical geometry gate failed.
Drawing notation: CHECK WITH HARDWARE MANUFACTURER
Room 607 library millwork drawing extraction.
1 count
Rebate dimensions are deliberately null because the sheet refers them to manufacturer coordination. Source audit state: verified. Physical geometry gate failed.
Drawing notation: REBATE FOR LUGS
Room 607 library millwork drawing extraction.
Arrow at upper-right local stool detail requires omission across stool; no whole-room omission inferred.
Drawing notation: OMIT MOULD ACROSS STOOL
Arrow at upper-right local stool detail requires omission across stool; no whole-room omission inferred.
Hardware coordination note points toward local rebate/lug condition; lug size, hardware make and rebate depth remain missing.
Drawing notation: REBATE FOR LUGS / CHECK WITH HARDWARE MANUFACTURER
Hardware coordination note points toward local rebate/lug condition; lug size, hardware make and rebate depth remain missing.
Core mould/nosing and butt-apron/top-base relationship read; connecting small handwriting remains unresolved.
Drawing notation: THESE MOULDS TO ALSO BE BELOW NOSING - BUTT APRON MOULD & TOP MOULD OF BASE ... INTO SAME
Core mould/nosing and butt-apron/top-base relationship read; connecting small handwriting remains unresolved.
Center support/piece requirement for long south-wall shelves, not a count or size.
Drawing notation: NOTE: USE CENTRE PIECE ON LONG SHELVES ON SOUTH WALL
Center support/piece requirement for long south-wall shelves, not a count or size.
Selected core note establishes track joints for door removal. Number/word between TWO and WITH not fully resolved.
Drawing notation: LOWER TRACKS TO BE IN TWO ... WITH JOINTS HERE ... REMOVE A DOOR WHEN NECESSARY [partial]
Selected core note establishes track joints for door removal. Number/word between TWO and WITH not fully resolved.
Oak assigned specifically to bookcase rails; no transfer to entire enclosure species.
Drawing notation: NOTE: ALL RAILS OF BOOK CASES OAK
Oak assigned specifically to bookcase rails; no transfer to entire enclosure species.
3 in
Horizontal control under circled M; local profile span between visible extension lines, not generic stile thickness.
Drawing notation: 3"
Horizontal control under circled M; local profile span between visible extension lines, not generic stile thickness.
72 in
Printed control beside jamb detail N; source-local jamb condition, no installed wall or door match.
Drawing notation: 6'-0" BETWEEN JAMBS
Printed control beside jamb detail N; source-local jamb condition, no installed wall or door match.
4 in
Upper horizontal first segment on O profile; profile local only.
Drawing notation: 4"
Upper horizontal first segment on O profile; profile local only.
0.0625 in
Left arrowed gap in L/M horizontal profile detail; inch unit follows adjacent 3-inch control. Installed joint assignment remains unresolved.
Drawing notation: 1/16
Left arrowed gap in L/M horizontal profile detail; inch unit follows adjacent 3-inch control. Installed joint assignment remains unresolved.
0.0625 in
Right arrowed gap in L/M horizontal profile detail; inch unit follows adjacent 3-inch control. Not a universal moulding tolerance.
Drawing notation: 1/16
Right arrowed gap in L/M horizontal profile detail; inch unit follows adjacent 3-inch control. Not a universal moulding tolerance.
0.0625 in
Break note beside M right-end profile. Break geometry and bevel orientation are unresolved; value is a selected scalar only.
Drawing notation: 1/16 BREAK
Break note beside M right-end profile. Break geometry and bevel orientation are unresolved; value is a selected scalar only.
Yellow head-detail instruction at N/head field; applies locally to receive door top. No door instance or rebate geometry assigned.
Drawing notation: CUT MOULD TO RECEIVE TOP OF DOOR
Yellow head-detail instruction at N/head field; applies locally to receive door top. No door instance or rebate geometry assigned.
12.75 in
White local O-profile dimension between internal witness lines following printed4-inch segment. Not jamb opening, room width or installed member count; member edge classes still unresolved.
Drawing notation: 12¾"
White local O-profile dimension between internal witness lines following printed4-inch segment. Not jamb opening, room width or installed member count; member edge classes still unresolved.
Calculated from: detail-library-img_0885-detail_o_horizontal_first_segment
2 count
Two-piece lower-track fabrication condition, not total installed tracks or number of doors. Joint leaders need complete endpoint ownership. Full remaining removal sentence remains partial.
Drawing notation: LOWER TRACKS TO BE IN TWO PIECES WITH JOINTS HERE
Two-piece lower-track fabrication condition, not total installed tracks or number of doors. Joint leaders need complete endpoint ownership. Full remaining removal sentence remains partial.
Calculated from: detail-library-img_0885-lower_track_removal_joints
Numeric value unresolved
Do not promote a probable 5/8 glyph. Native access crop remains ambiguous and endpoint/profile registration is incomplete.
Drawing notation: [fraction partly intersected by yellow arrow; unresolved]
Do not promote a probable 5/8 glyph. Native access crop remains ambiguous and endpoint/profile registration is incomplete.
Printed caption below the east-wall plan defines a reversed west-wall elevation reference. No room-plan registration, handedness transform or matching endpoint geometry is accepted.
Drawing notation: PLAN EAST WALL — ELEVATION SAME AS WEST WALL REVERSED
Printed caption below the east-wall plan defines a reversed west-wall elevation reference. No room-plan registration, handedness transform or matching endpoint geometry is accepted.
Numeric value unresolved
Right P horizontal string has a readable9 numeral, but unit/member endpoints are insecure. Does not resolve the left fractional glyph.
Drawing notation: 9 [no securely read unit]
Right P horizontal string has a readable9 numeral, but unit/member endpoints are insecure. Does not resolve the left fractional glyph.
Original white track note around yellow hardware leader; TWO PIECES count already registered. Newly transcribed remove-sections clause defines maintenance purpose, without assigning exact joint/leaf endpoints.
Drawing notation: LOWER TRACKS TO BE IN TWO PIECES WITH JOINTS HERE / IT BEING NECESSARY TO REMOVE SECTIONS IN ORDER / TO REMOVE A DOOR WHEN NECESSARY
Original white track note around yellow hardware leader; TWO PIECES count already registered. Newly transcribed remove-sections clause defines maintenance purpose, without assigning exact joint/leaf endpoints.
Calculated from: library1013i-885-lower-track-piece-count
Yellow instruction around jamb/nosing details. Small intervening original white words are kept separate and remain insecure. No profile dimensions or accepted revision inferred.
Drawing notation: THESE MOULDS TO ALSO BE BELOW NOSING - BUTT APRON MOULD & TOP MOULD OF BASE INTO SAME
Yellow instruction around jamb/nosing details. Small intervening original white words are kept separate and remain insecure. No profile dimensions or accepted revision inferred.
Numeric value unresolved
White F-profile short segment. Fractional numeral is retained, but unit/member-edge assignment is not secure; no numeric length inferred.
Drawing notation: 1¼ [no secure unit glyph]
White F-profile short segment. Fractional numeral is retained, but unit/member-edge assignment is not secure; no numeric length inferred.