Gus J. SolomonUnited States Courthouse
MenuClose
← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs
464
Identified objects
4872
Verified printed values
12046
Disputed values
20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

Clear filters
IMG_1035 · Folder 192

Plan At Window /220

Original sheet identity has not yet been reconciled.

Extraction: Reviewed · extraction partial. Bounded architectural wall-chain search; applicability reviewed, whole sheet not extracted. Partial timed visual review: Follow-up visual derivative review. Coordinates normalized before stated clockwise rotation. Assembly-local evidence; installed instances and room geometry remain unregistered. Partial timed visual review: Intake label and center-mullion construction only; window /22 is a source mark, not an established room number. Partial timed visual review: Structured partial first-pass repair of legacy coverage-only gap. Read existing reports/OCR before one <=1000px JPEG65 locator. No complete extraction/geometry claim. Source region is normalized access image; actual rotation0. Prior audit supplied sheet identity where recorded. Partial timed visual review: Selected source-local witness/callout review only; original and annotation layers kept separate.

Unresolved extraction work
  • classified interior finish-face location in the same W207/W403 section reference system
  • printed or independently controlled total perpendicular exterior-to-interior wall thickness
  • stone, backup, air space, waterproofing and room-side finish layer thicknesses with continuous endpoints
  • fourth-floor middle-bay applicability of each W207 local jamb/return condition
  • source-picked W-6 room-side face to W403 stone-face registration and independent check
  • masonry, frame, sash and clear-opening boundary reconciliation
  • complete W207/W208 callout, note and companion-detail coverage
  • Targeted high-resolution fractional dimension and small-note review
  • Companion exposures and revisions reconciliation
  • Physical floor/room/instance registration
  • Hidden/cropped source regions
  • All remaining notes, cropped jamb and duct/head/sill details
  • Companion/revision reconciliation and installed registration
  • all remaining notes, dimensions and schedules
  • full-sheet completeness
  • original/annotation reconciliation and physical instance mapping
  • All remaining fine profiles, dimensions, witness endpoints, fabrication notes and schedules require regional review.
  • Original/revision and companion authority, installed quantities, floor/room placement and source-to-building registration unresolved; modeling unchecked.

Download OCR observations (unverified)

Loading the selected drawing…

Scroll or pinch to inspect this drawing. Archival drawing photograph · Oregon Historical Society research collections.

Open source image separately ↗

22 matching properties

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

legacy-img1035-assemblyverified · printed

louver_label_revision

FRESH AIR INTAKE LOUVERS

Separate conflicting reading against legacy-img1035-m006 'BRASS INTAKE LOUVERS': visible note reads FRESH AIR INTAKE LOUVERS; does not establish material.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: FRESH AIR INTAKE LOUVERS

Separate conflicting reading against legacy-img1035-m006 'BRASS INTAKE LOUVERS': visible note reads FRESH AIR INTAKE LOUVERS; does not establish material.

legacy-img1035-assemblyverified · printed

bottom_glazing_condition

IN-OPENING HOPPERS

Assembly-local source reading; no whole-room or installed-instance geometry inference.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: IN-OPENING HOPPERS

Assembly-local source reading; no whole-room or installed-instance geometry inference.

legacy-img1035-assemblyverified · printed

sill_height

2'-2"

26 in

Assembly-local source reading; no whole-room or installed-instance geometry inference.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: 2'-2"

Assembly-local source reading; no whole-room or installed-instance geometry inference.

legacy-img1035-assemblyverified · printed

bent_plate_thickness

¼" x 1½" x 4" BENT PLATES WELDED TO TOP & BOTTOM [terminal designation unresolved]

0.25 in

Assembly-local source reading; no whole-room or installed-instance geometry inference.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: ¼" x 1½" x 4" BENT PLATES WELDED TO TOP & BOTTOM [terminal designation unresolved]

Assembly-local source reading; no whole-room or installed-instance geometry inference.

legacy-img1035-assemblyverified · printed

bent_plate_width

¼" x 1½" x 4" BENT PLATES WELDED TO TOP & BOTTOM [terminal designation unresolved]

1.5 in

Assembly-local source reading; no whole-room or installed-instance geometry inference.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: ¼" x 1½" x 4" BENT PLATES WELDED TO TOP & BOTTOM [terminal designation unresolved]

Assembly-local source reading; no whole-room or installed-instance geometry inference.

legacy-img1035-assemblyverified · printed

bent_plate_length

¼" x 1½" x 4" BENT PLATES WELDED TO TOP & BOTTOM [terminal designation unresolved]

4 in

Assembly-local source reading; no whole-room or installed-instance geometry inference.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: ¼" x 1½" x 4" BENT PLATES WELDED TO TOP & BOTTOM [terminal designation unresolved]

Assembly-local source reading; no whole-room or installed-instance geometry inference.

legacy-img1035-assemblyverified · printed

louver_material_reading_resolution

FRESH AIR INTAKE LOUVERS

Street elevation and bottom title both read FRESH AIR INTAKE LOUVERS. Earlier BRASS is a transcription error, not competing printed material evidence. Preserve earlier record but exclude it as an alloy specification; no replacement alloy supplied.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: FRESH AIR INTAKE LOUVERS

Street elevation and bottom title both read FRESH AIR INTAKE LOUVERS. Earlier BRASS is a transcription error, not competing printed material evidence. Preserve earlier record but exclude it as an alloy specification; no replacement alloy supplied.

legacy-img1035-assemblyverified · printed

center_mullion_channel_material_relationship

3" STEEL CHANNEL

Leader identifies the center-mullion channel as steel; this does not identify louver material or thickness. The printed size token is not promoted separately because full designation and channel series remain open.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: 3" STEEL CHANNEL

Leader identifies the center-mullion channel as steel; this does not identify louver material or thickness. The printed size token is not promoted separately because full designation and channel series remain open.

legacy-img1035-assemblyverified · printed

printed_window_reference

WINDOW /22

Selected printed source or documented prior audit; partial source-local review.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: WINDOW /22

Selected printed source or documented prior audit; partial source-local review.

legacy-img1035-assemblyverified · printed

duct_width

DUCT 7'-4" WIDE

88 in

Opening/duct width along opening only; not perpendicular wall depth. Verified prior textual audit and current locator.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: DUCT 7'-4" WIDE

Opening/duct width along opening only; not perpendicular wall depth. Verified prior textual audit and current locator.

legacy-img1035-assemblyverified · printed

masonry_opening_width

7'-6" MASONRY OPENING

90 in

Opening/duct width along opening only; not perpendicular wall depth. Verified prior textual audit and current locator.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: 7'-6" MASONRY OPENING

Opening/duct width along opening only; not perpendicular wall depth. Verified prior textual audit and current locator.

legacy-img1035-assemblyverified · printed

glazing_condition_fixed

FIXED GLASS

Selected printed source or documented prior audit; partial source-local review.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: FIXED GLASS

Selected printed source or documented prior audit; partial source-local review.

legacy-img1035-assemblyverified · printed

glazing_condition_casement

IN-OPENING CASEMENTS

Selected printed source or documented prior audit; partial source-local review.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: IN-OPENING CASEMENTS

Selected printed source or documented prior audit; partial source-local review.

legacy-img1035-assemblyverified · printed

louver_material

BRASS INTAKE LOUVERS

Selected printed source or documented prior audit; partial source-local review.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: BRASS INTAKE LOUVERS

Selected printed source or documented prior audit; partial source-local review.

legacy-img1035-assemblyverified · printed

wall_finish

PLASTER

Selected printed source or documented prior audit; partial source-local review.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: PLASTER

Selected printed source or documented prior audit; partial source-local review.

legacy-img1035-assemblyverified · printed

wainscot

TILE WAINSCOT

Selected printed source or documented prior audit; partial source-local review.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: TILE WAINSCOT

Selected printed source or documented prior audit; partial source-local review.

legacy-img1035-assemblyverified · printed

head_sill_lead

SHEET LEAD

Selected printed source or documented prior audit; partial source-local review.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: SHEET LEAD

Selected printed source or documented prior audit; partial source-local review.

legacy-img1035-assemblyunreviewed · printed

steel_section_unresolved

¼? x ¼? x 4? BENT PLATES WELDED [unresolved fractions]

Numeric value unresolved

Tentative or unresolved locator; numeric value withheld.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: ¼? x ¼? x 4? BENT PLATES WELDED [unresolved fractions]

Tentative or unresolved locator; numeric value withheld.

legacy-img1035-assemblyverified · printed

bent_plate_thickness

¼″ × 1½″ × 4″ BENT PLATES WELDED TO TOP & BOTTOM 5″ C.S.

0.25 in

Same center-mullion bent-plate designation; first explicitly inch-marked token only. Terminal C.S. expansion remains unresolved. Source-local only; no installed count, accepted geometry, revision authority or physical registration.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: ¼″ × 1½″ × 4″ BENT PLATES WELDED TO TOP & BOTTOM 5″ C.S.

Same center-mullion bent-plate designation; first explicitly inch-marked token only. Terminal C.S. expansion remains unresolved. Source-local only; no installed count, accepted geometry, revision authority or physical registration.

legacy-img1035-assemblyverified · printed

bent_plate_width

¼″ × 1½″ × 4″ BENT PLATES WELDED TO TOP & BOTTOM 5″ C.S.

1.5 in

Same center-mullion bent-plate designation; second explicitly inch-marked token only. Source-local only; no installed count, accepted geometry, revision authority or physical registration.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: ¼″ × 1½″ × 4″ BENT PLATES WELDED TO TOP & BOTTOM 5″ C.S.

Same center-mullion bent-plate designation; second explicitly inch-marked token only. Source-local only; no installed count, accepted geometry, revision authority or physical registration.

legacy-img1035-assemblyverified · printed

bent_plate_length

¼″ × 1½″ × 4″ BENT PLATES WELDED TO TOP & BOTTOM 5″ C.S.

4 in

Same center-mullion bent-plate designation; third explicitly inch-marked token only. Source-local only; no installed count, accepted geometry, revision authority or physical registration.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: ¼″ × 1½″ × 4″ BENT PLATES WELDED TO TOP & BOTTOM 5″ C.S.

Same center-mullion bent-plate designation; third explicitly inch-marked token only. Source-local only; no installed count, accepted geometry, revision authority or physical registration.

legacy-img1035-assemblyverified · printed

bent_plate_weld_clause

¼″ × 1½″ × 4″ BENT PLATES WELDED TO TOP & BOTTOM 5″ C.S.

Full clause recorded literally. 5″ C.S. retained as printed designation; abbreviation, spacing interpretation, weld geometry and governing issue remain unestablished. Source-local only; no installed count, accepted geometry, revision authority or physical registration.

IMG_1035 · W510 · Locate on drawing ↗

Drawing notation: ¼″ × 1½″ × 4″ BENT PLATES WELDED TO TOP & BOTTOM 5″ C.S.

Full clause recorded literally. 5″ C.S. retained as printed designation; abbreviation, spacing interpretation, weld geometry and governing issue remain unestablished. Source-local only; no installed count, accepted geometry, revision authority or physical registration.

View all source photographs →