Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.
464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.
Download the structured register (JSON)Original sheet identity has not yet been reconciled.
Extraction: Reviewed · extraction partial. Partial timed visual review: Partial first-pass review of public/archive/drawings/folder-195/IMG_0906.webp. Actual orientation recorded; source regions refer to displayed access-image coordinates. No modeling or exact room geometry inference. Partial timed visual review: Explicit source-local region inventory and additive bounded property review; catalogue labels are discovery aids. Original and colored handwritten revisions remain separate. No physical geometry authoring. Partial timed visual review: Additive bounded detail review, 2026-10-11. Existing verified extraction reused; no building geometry accepted and no full-sheet completeness claim. Regions are normalized raw access-image coordinates before presentation rotation. Partial timed visual review: Gate-end elevation inner panel widths only. Existing overall plan controls and orange mullion revision remain separate.
Loading the selected drawing…
Scroll or pinch to inspect this drawing. Archival drawing photograph · Oregon Historical Society research collections.
Open source image separately ↗Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
216 identifier
Selected printed source evidence; partial review.
Drawing notation: ROOM 216
Selected printed source evidence; partial review.
151 in
Selected printed source evidence; partial review.
Drawing notation: 12'-7"
Selected printed source evidence; partial review.
59.25 in
Selected printed source evidence; partial review.
Drawing notation: 4'-11¼"
Selected printed source evidence; partial review.
24 in
Selected printed source evidence; partial review.
Drawing notation: 2'-0"
Selected printed source evidence; partial review.
128.125 in
Fraction tentatively read; verify full-resolution endpoints.
Drawing notation: 10'-8⅛"
Fraction tentatively read; verify full-resolution endpoints.
Selected printed source evidence; partial review.
Drawing notation: DISREGARD LINING FRONT & BACK MULLIONS
Selected printed source evidence; partial review.
Selected printed source evidence; partial review.
Drawing notation: MAKE MULLIONS SAME THICKNESS AS STILES ON DOORS IN ORDER TO ACCOMMODATE SURFACE LATCHES
Selected printed source evidence; partial review.
24 in
Horizontal printed span across Section A-A immediately below its cut view in native upside-down exposure. Local section span only; distinct from previously recorded quarter-plan depth and not whole-counter extent.
Drawing notation: 2′-0″
Horizontal printed span across Section A-A immediately below its cut view in native upside-down exposure. Local section span only; distinct from previously recorded quarter-plan depth and not whole-counter extent.
7 count
Selected source evidence only; authoring ineligible pending complete extraction and registration.
Drawing notation: [seven framed bays in REAR ELEVATION]
Selected source evidence only; authoring ineligible pending complete extraction and registration.
Numeric value unresolved
Selected source evidence only; authoring ineligible pending complete extraction and registration.
Drawing notation: [dimension across GATE END ELEVATION; fraction insufficiently secure]
Selected source evidence only; authoring ineligible pending complete extraction and registration.
Reuses prior verified orange instructions; no derivation of a mullion thickness
Drawing notation: DISREGARD LINING FRONT & BACK MULLIONS; MAKE MULLIONS SAME THICKNESS AS STILES ON DOORS IN ORDER TO ACCOMMODATE SURFACE LATCHES
Reuses prior verified orange instructions; no derivation of a mullion thickness
30 in
Inner raised-panel width in right gate-end elevation field; excludes surrounding stiles, mouldings and opening. Not gate leaf overall width.
Drawing notation: 2′-6″
Inner raised-panel width in right gate-end elevation field; excludes surrounding stiles, mouldings and opening. Not gate leaf overall width.
13.5 in
Inner panel horizontal width of left field in gate-end elevation. No floor assignment or physical fixed-panel identity inferred.
Drawing notation: 1′-1½″
Inner panel horizontal width of left field in gate-end elevation. No floor assignment or physical fixed-panel identity inferred.
Open note in strip below right panel; adjacent vertical numeral and full opening geometry withheld.
Drawing notation: open
Open note in strip below right panel; adjacent vertical numeral and full opening geometry withheld.