Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.
464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.
Download the structured register (JSON)Original sheet identity has not yet been reconciled.
Extraction: Reviewed · extraction partial. Partial timed visual review: Partial review of upright access derivative public/archive/drawings/folder-195/IMG_0904.webp. Catalogue locator omitted public/archive prefix. Visually verified upright at zero rotation. Focus on room label, lower-left plan, large right section and shelf-standard note. Image review remains incomplete; no modeling acceptance. Partial timed visual review: undefined Partial timed visual review: Bounded source review; prior readings reused, every new property source-local and authoring-ineligible. No whole-image completion or installed quantity established. Partial timed visual review: Additive bounded detail review, 2026-10-11. Existing verified extraction reused; no building geometry accepted and no full-sheet completeness claim. Regions are normalized raw access-image coordinates before presentation rotation. Partial timed visual review: Selected large right counter-top cross-section only. Existing overall section horizontal span and support specification reused without duplication. Partial timed visual review: undefined
Loading the selected drawing…
Scroll or pinch to inspect this drawing. Archival drawing photograph · Oregon Historical Society research collections.
Open source image separately ↗Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
216 identifier
Printed room number preserved as an identifier; floor assignment has not been established.
Drawing notation: ROOM 216
Printed room number preserved as an identifier; floor assignment has not been established.
Title above lower-left plan.
151 in
Overall dimension beneath lower-left plan. Dimension chain remains unreviewed.
Drawing notation: 12′-7″
Overall dimension beneath lower-left plan. Dimension chain remains unreviewed.
14 in
Printed note in lower portion of large right section; individual supports not yet enumerated.
Drawing notation: Shelf Support Bars / full width of Standards / Spaced 14″ O.C.
Printed note in lower portion of large right section; individual supports not yet enumerated.
24 in
Horizontal dimension below top member in large right section. Exact endpoints and component interpretation require follow-up.
Drawing notation: 2′-0″
Horizontal dimension below top member in large right section. Exact endpoints and component interpretation require follow-up.
Heading over material notes below large right section. Not assigned to every casework component; full note transcription remains missing.
Drawing notation: MAHOGANY
Heading over material notes below large right section. Not assigned to every casework component; full note transcription remains missing.
Lower-center labeled gate end elevation; geometry and dimensions not extracted.
Drawing notation: GATE END ELEVATION
Lower-center labeled gate end elevation; geometry and dimensions not extracted.
Original-white countertop material line beneath separate orange MAHOGANY annotation. Governing material/revision is unresolved.
Drawing notation: Counter top Plain White Oak
Original-white countertop material line beneath separate orange MAHOGANY annotation. Governing material/revision is unresolved.
Orange material annotation above original-white countertop line. Association is spatially evident; accepted substitution, affected component extent and historical authority unresolved.
Drawing notation: MAHOGANY
Orange material annotation above original-white countertop line. Association is spatially evident; accepted substitution, affected component extent and historical authority unresolved.
Exposed-part material instruction; first named mahogany variety spelling remains insecure. Preserve partial reading without silently completing species nomenclature.
Drawing notation: All exposed parts Hard close grain [Batan?] or Tangile Mahogany
Exposed-part material instruction; first named mahogany variety spelling remains insecure. Preserve partial reading without silently completing species nomenclature.
Original-white material clause applies only to unexposed parts.
Drawing notation: Unexposed parts Yellow Pine
Original-white material clause applies only to unexposed parts.
Shelf assembly construction clause; separate from countertop and drawer layers.
Drawing notation: Shelves laminated 3 ply Yellow Pine 7/16"
Shelf assembly construction clause; separate from countertop and drawer layers.
3 ply
Shelf-lamination ply count; not installed shelf quantity.
Drawing notation: 3 ply
Shelf-lamination ply count; not installed shelf quantity.
0.4375 in
Printed shelf-note thickness with explicit inch mark; individual core/veneer layer thicknesses unresolved.
Drawing notation: 7/16"
Printed shelf-note thickness with explicit inch mark; individual core/veneer layer thicknesses unresolved.
1.25 in
Adjustable shelf cleat-slot pitch. Does not replace separately registered 14-inch support-bar spacing.
Drawing notation: Adjustable shelf cleat slots 1 1/4" O.C.
Adjustable shelf cleat-slot pitch. Does not replace separately registered 14-inch support-bar spacing.
Alternative countertop core materials; literal W.P. abbreviation retained. Maximum strip width is separate from thickness.
Drawing notation: Counter top cores W.P. Poplar or chestnut not over 1" wide
Alternative countertop core materials; literal W.P. abbreviation retained. Maximum strip width is separate from thickness.
1 in
Upper bound for countertop core-strip width; no exact nominal strip size inferred.
Drawing notation: not over 1" wide
Upper bound for countertop core-strip width; no exact nominal strip size inferred.
Panel core lamination requirement; no ply count or layer thickness established.
Drawing notation: Panel cores laminated
Panel core lamination requirement; no ply count or layer thickness established.
Veneer selection specification, not a measured pattern or veneer thickness.
Drawing notation: Veneers selected for ornamental grain
Veneer selection specification, not a measured pattern or veneer thickness.
Original-white exposed-surface preparation clause; no abrasive grade or removal depth assigned.
Drawing notation: Sponge exposed parts for natural finish and sand smooth
Original-white exposed-surface preparation clause; no abrasive grade or removal depth assigned.
Finish specification references an approved sample, which remains unidentified.
Drawing notation: Finish - Stain to approved sample for a shellac and wax finish
Finish specification references an approved sample, which remains unidentified.
Accessible interior surfaces; no exact coating thickness or product established.
Drawing notation: Inside accessible parts stained, shellacked and sanded
Accessible interior surfaces; no exact coating thickness or product established.
Back-surface primer specification only.
Drawing notation: Backs primed lead and oil
Back-surface primer specification only.
Fabrication/delivery instruction; no hardware model, count, handing or location established.
Drawing notation: Hardware installed
Fabrication/delivery instruction; no hardware model, count, handing or location established.
Product/connecting words remain insecure. This source-local clause stays null and is not completed from a companion.
Drawing notation: Panels filled or stained and given a coat of [uncertain] before rubbing
Product/connecting words remain insecure. This source-local clause stays null and is not completed from a companion.
White open label occupies lower strip beneath the framed gate panel; documents a source-local opening condition, not gate swing or operational state.
Drawing notation: open
White open label occupies lower strip beneath the framed gate panel; documents a source-local opening condition, not gate swing or operational state.
5 count
Excludes top and bottom case members; not inventory of installed shelves
Drawing notation: [five intermediate horizontal shelves in large section]
Excludes top and bottom case members; not inventory of installed shelves
7 count
Selected source evidence only; authoring ineligible pending complete extraction and registration.
Drawing notation: [seven framed bays in REAR ELEVATION]
Selected source evidence only; authoring ineligible pending complete extraction and registration.
64 identifier
Selected source evidence only; authoring ineligible pending complete extraction and registration.
Drawing notation: DRAW NO. 64
Selected source evidence only; authoring ineligible pending complete extraction and registration.
2008 identifier
Selected source evidence only; authoring ineligible pending complete extraction and registration.
Drawing notation: ORDER 2008
Selected source evidence only; authoring ineligible pending complete extraction and registration.
Exposure relationship only; does not merge separate historic instance IDs
Drawing notation: [same Room 216 counter profiles, plan and orange revisions as IMG_0905/IMG_0906]
Exposure relationship only; does not merge separate historic instance IDs
2 in
Vertical control spans upper and lower faces of large counter-top section. Separate core/veneer buildup unresolved.
Drawing notation: 2″
Vertical control spans upper and lower faces of large counter-top section. Separate core/veneer buildup unresolved.
3.875 in
Horizontal control beneath front profiled counter-top edge, from front edge witness to adjoining upright support witness; no radius inferred.
Drawing notation: 3⅞″
Horizontal control beneath front profiled counter-top edge, from front edge witness to adjoining upright support witness; no radius inferred.
Section shows thin face layers above and below a deeper core, with profiled ends. Material and layer thickness not derived from hatching.
Section shows thin face layers above and below a deeper core, with profiled ends. Material and layer thickness not derived from hatching.