Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.
464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.
Download the structured register (JSON)Original sheet identity has not yet been reconciled.
Extraction: Reviewed · extraction partial. Partial timed visual review: Timed partial review of archive/folder-195/web/IMG_0902.webp; public derivative absent. Upright visually. Naturalization Clerk counter title and Room 620 read directly; no floor assignment. Full drawing regions remain incomplete. Partial timed visual review: undefined Partial timed visual review: Bounded source review; prior readings reused, every new property source-local and authoring-ineligible. No whole-image completion or installed quantity established. Partial timed visual review: Additive bounded detail review, 2026-10-11. Existing verified extraction reused; no building geometry accepted and no full-sheet completeness claim. Regions are normalized raw access-image coordinates before presentation rotation. Partial timed visual review: Money-drawer horizontal compartment chain and Maple leader only. Prior drawer width and six circular pocket count retained in prior packages. Compartment widths are not circular-pocket diameters. Partial timed visual review: undefined
Loading the selected drawing…
Scroll or pinch to inspect this drawing. Archival drawing photograph · Oregon Historical Society research collections.
Open source image separately ↗Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
2 ft
Money drawer upper horizontal dimension; partial detail review.
Drawing notation: 2'-0"
Money drawer upper horizontal dimension; partial detail review.
Source-local support-bar clause in large section; says supports span the standard width. Does not quantify that width or installed support count.
Drawing notation: full width of Standard
Source-local support-bar clause in large section; says supports span the standard width. Does not quantify that width or installed support count.
14 in
Source-local support-bar spacing note below full-width clause, with explicit inch mark; not the adjustable cleat-slot pitch.
Drawing notation: 14" O.C.
Source-local support-bar spacing note below full-width clause, with explicit inch mark; not the adjustable cleat-slot pitch.
Large right section lower blocking note. A construction distribution requirement, not an installed standard count.
Drawing notation: Blocking at alternate standards
Large right section lower blocking note. A construction distribution requirement, not an installed standard count.
Material clause applies to exposed parts only; no installed room allocation or finish sample inferred.
Drawing notation: All exposed parts fine grain plain white oak
Material clause applies to exposed parts only; no installed room allocation or finish sample inferred.
Material clause applies to unexposed parts only.
Drawing notation: Unexposed parts Yellow Pine
Material clause applies to unexposed parts only.
Shelf construction clause; thickness qualifier attaches to shelf note, not countertop or drawer bottom.
Drawing notation: Shelves laminated 3 ply Yellow Pine 7/16"
Shelf construction clause; thickness qualifier attaches to shelf note, not countertop or drawer bottom.
3 ply
Printed shelf-lamination ply count; not shelf quantity.
Drawing notation: 3 ply
Printed shelf-lamination ply count; not shelf quantity.
0.4375 in
Printed shelf-note thickness; no separate veneer/core thickness extracted.
Drawing notation: 7/16"
Printed shelf-note thickness; no separate veneer/core thickness extracted.
1.25 in
Pitch of adjustable shelf cleat slots in specification; separate from 14-inch support-bar spacing.
Drawing notation: Adjustable shelf cleat slots 1 1/4" O.C.
Pitch of adjustable shelf cleat slots in specification; separate from 14-inch support-bar spacing.
Literal alternative core materials and maximum strip width. W.P. abbreviation retained without expansion; no layer thickness inferred.
Drawing notation: Counter top cores W.P. Poplar or chestnut not over 1" wide
Literal alternative core materials and maximum strip width. W.P. abbreviation retained without expansion; no layer thickness inferred.
1 in
Upper-bound width of countertop core strips, not exact nominal width.
Drawing notation: not over 1" wide
Upper-bound width of countertop core strips, not exact nominal width.
Panel core construction method only; material and ply count not supplied.
Drawing notation: Panel cores laminated
Panel core construction method only; material and ply count not supplied.
Veneer selection instruction; no veneer thickness, species or grain map established.
Drawing notation: Veneers selected for ornamental grain
Veneer selection instruction; no veneer thickness, species or grain map established.
Printed drawer joinery clause. No dovetail size, groove depth or installed count established.
Drawing notation: Drawers dovetailed sides to fronts and groove bottoms and backs
Printed drawer joinery clause. No dovetail size, groove depth or installed count established.
IMG0902 source-local drawer-side fabrication instruction. It does not close IMG0903's separately photographed historical null question and supplies no numeric depth.
Drawing notation: Sides to run back as far as possible (Hardwood)
IMG0902 source-local drawer-side fabrication instruction. It does not close IMG0903's separately photographed historical null question and supplies no numeric depth.
Material clause for drawer runs and guides, not all drawer components.
Drawing notation: Hardwood runs and guides
Material clause for drawer runs and guides, not all drawer components.
3 ply
Drawer-bottom ply count only; bottom material and thickness remain unspecified.
Drawing notation: 3 ply bottoms
Drawer-bottom ply count only; bottom material and thickness remain unspecified.
Surface preparation for exposed parts; no abrasion grade or dimensional removal inferred.
Drawing notation: Sponge exposed parts for natural finish and sand smooth
Surface preparation for exposed parts; no abrasion grade or dimensional removal inferred.
Stain color requires an approved sample; wax finish stated, products and number of coats unresolved.
Drawing notation: Finish Stain to approved color for a wax finish
Stain color requires an approved sample; wax finish stated, products and number of coats unresolved.
Interior accessible parts including drawers; no coating product or thickness inferred.
Drawing notation: Inside accessible parts including drawers stained-shellacked and sand smooth
Interior accessible parts including drawers; no coating product or thickness inferred.
Back-surface primer specification only.
Drawing notation: Backs primed lead and oil
Back-surface primer specification only.
Fabrication/delivery note; no model, quantity, handing or mounting elevation established.
Drawing notation: Hardware installed
Fabrication/delivery note; no model, quantity, handing or mounting elevation established.
Generic companion-detail reference only; no exact sheet number or physical shelf identity inferred.
Drawing notation: Teller shelves as per teller detail
Generic companion-detail reference only; no exact sheet number or physical shelf identity inferred.
Connecting words/product remain insecure in this native crop. Do not infer from IMG0903 or IMG0904 companion wording.
Drawing notation: Panels filled or stained and given a coat of [uncertain] before rubbing
Connecting words/product remain insecure in this native crop. Do not infer from IMG0903 or IMG0904 companion wording.
6 count
Selected source evidence only; authoring ineligible pending complete extraction and registration.
Drawing notation: [six circular compartments in MONEY DRAWER detail]
Selected source evidence only; authoring ineligible pending complete extraction and registration.
59 identifier
Selected source evidence only; authoring ineligible pending complete extraction and registration.
Drawing notation: 59
Selected source evidence only; authoring ineligible pending complete extraction and registration.
2008 identifier
Selected source evidence only; authoring ineligible pending complete extraction and registration.
Drawing notation: 2008
Selected source evidence only; authoring ineligible pending complete extraction and registration.
Printed view inventory; drawer-to-counter fastening/position remains unregistered
Drawing notation: FRONT ELEVATION; ELEVATION OF BACK; PLAN; MONEY DRAWER
Printed view inventory; drawer-to-counter fastening/position remains unregistered
Numeric value unresolved
Selected source evidence only; authoring ineligible pending complete extraction and registration.
Drawing notation: [teller shelves and adjustable supports; exact wording/fractions unresolved]
Selected source evidence only; authoring ineligible pending complete extraction and registration.
4 in
First horizontal witness span through middle row, bounded by drawer side and first vertical partition. Not a diameter.
Drawing notation: 4″
First horizontal witness span through middle row, bounded by drawer side and first vertical partition. Not a diameter.
4 in
Second horizontal witness span through middle row between vertical partitions. Separate printed span; not inferred from first column.
Drawing notation: 4″
Second horizontal witness span through middle row between vertical partitions. Separate printed span; not inferred from first column.
8 in
Printed 8 inch horizontal segment between vertical partitions, adjoining circular-pocket columns.
Drawing notation: 8″
Printed 8 inch horizontal segment between vertical partitions, adjoining circular-pocket columns.
4 in
Right horizontal segment before drawer side; thickness fractions on either side not included.
Drawing notation: 4″
Right horizontal segment before drawer side; thickness fractions on either side not included.
Two leaders adjoin central horizontal divider and vertical partition. Maple not generalized to complete counter or drawer exterior.
Drawing notation: Maple
Two leaders adjoin central horizontal divider and vertical partition. Maple not generalized to complete counter or drawer exterior.
Numeric value unresolved
Fractional partition controls and overall vertical endpoints require better source reading; no total calculated.
Fractional partition controls and overall vertical endpoints require better source reading; no total calculated.