Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.
464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.
Download the structured register (JSON)Object: Main entrance bronze rail stone anchorage
Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
1 in
Drawing notation: ONE INCH DIAMETER HOLE THRU STONE
W-213 local fabrication evidence only; no project rail layout or world insertion is established.
0.125 in
Drawing notation: 1/8" WASH
W-213 local fabrication evidence only; no project rail layout or world insertion is established.
6 in
Vertical dimension on the stone support beneath the rail base. It is not labeled as stair riser height or tread thickness and is ineligible for those properties.
Drawing notation: 6"
W-213 local fabrication evidence only; no project rail layout or world insertion is established.
0.25 in
Drawing notation: 1/4" x 4" WASHERS
W-213 local fabrication evidence only; no project rail layout or world insertion is established.
4 in
The second washer dimension is 4 inches. Plan shape and the orthogonal dimension are not separately stated.
Drawing notation: 1/4" x 4" WASHERS
W-213 local fabrication evidence only; no project rail layout or world insertion is established.
Recorded text value: bottom of flange shaped to fit wash of stone.
Drawing notation: BOTTOM OF FLANGE SHAPED TO FIT WASH OF STONE
W-213 local fabrication evidence only; no project rail layout or world insertion is established.
13 in
Printed beside the support/anchorage profile, but overlapping extension/reference lines prevent secure assignment to a specific edge distance, flange width or stone projection. Authoring eligibility: ineligible.
Drawing notation: 1'-1"
W-213 local fabrication evidence only; no project rail layout or world insertion is established.
The printed 13-inch numeric token remains reused and unreviewed for manufactured-face applicability. Extension lines in the detail align as stated; neither endpoint securely represents a stone edge, flange edge, installed baluster station or tread nosing. This observation does not promote the old numeric control to verified authoring.
Drawing notation: 1'-1"
The printed 13-inch numeric token remains reused and unreviewed for manufactured-face applicability. Extension lines in the detail align as stated; neither endpoint securely represents a stone edge, flange edge, installed baluster station or tread nosing. This observation does not promote the old numeric control to verified authoring.
Source inventory is separate from the floor filters above. Select one drawing to inspect it; no drawing set is preloaded.