Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.
464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.
Download the structured register (JSON)Object: Main entrance bronze stair rail
Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
Drawing notation: BRONZE RAIL / SEE DETAIL SH. 213
Numeric value unresolved
Drawing notation: BRONZE RAIL / SEE DETAIL SH. 213
Rail is drawn but no secure height dimension is assigned on the selected view.
Numeric value unresolved
Drawing notation: BRONZE RAIL
Graphic post marks are not promoted to an exact count; the referenced detail sheet remains unreviewed.
Recorded text value: W-213.
Drawing notation: W-213
W-213 local fabrication evidence only; no project rail layout or world insertion is established.
Recorded text value: 201.
Drawing notation: FOR LOCATION & ARRANGEMENT SEE SHEET NO. 201
W-213 local fabrication evidence only; no project rail layout or world insertion is established.
2 count
Drawing notation: DOUBLE RAIL
W-213 local fabrication evidence only; no project rail layout or world insertion is established.
The sheet distinguishes cast-bronze hollow shafts, solid-bronze forked pieces, and bronze machine screws. It does not establish every rail segment as the same casting process. Recorded text value: bronze.
Drawing notation: CAST BRONZE / HOLLOW SHAFT; SOLID BRONZE FORKED PIECE; COUNTERSUNK BRONZE MACHINE SCREWS
W-213 local fabrication evidence only; no project rail layout or world insertion is established.
2.833333 ft
Drawing notation: 2'-10"
W-213 local fabrication evidence only; no project rail layout or world insertion is established.
12 in
Drawing notation: COUNTERSUNK BRONZE MACHINE SCREWS 12" O.C.
W-213 local fabrication evidence only; no project rail layout or world insertion is established.
W-213 is a fabrication detail and sends location/arrangement to Sheet 201. The drawn scroll/rail length is not scaled from pixels.
Drawing notation: FOR LOCATION & ARRANGEMENT SEE SHEET NO. 201
W-213 local fabrication evidence only; no project rail layout or world insertion is established.
The detail depicts representative posts; location and arrangement belong to Sheet 201, so graphic instances are not promoted to a project count.
Drawing notation: FOR LOCATION & ARRANGEMENT SEE SHEET NO. 201
W-213 local fabrication evidence only; no project rail layout or world insertion is established.
No project post spacing is printed in the bounded detail. The 12-inch-on-center value applies to bronze machine screws, not posts.
Drawing notation: COUNTERSUNK BRONZE MACHINE SCREWS 12" O.C.; FOR LOCATION & ARRANGEMENT SEE SHEET NO. 201
W-213 local fabrication evidence only; no project rail layout or world insertion is established.
Recorded text value: W-201.
Drawing notation: DRAWING NO. W-201
W-201 local arrangement evidence only; no canonical world insertion is established.
7 ft
Drawing notation: 7'-0"; CENTER LINE OF ENTRANCE; HALF PLAN
The printed 7-foot dimension runs from CENTER LINE OF ENTRANCE to the rail axis on the drawn half. No world-axis sign is assigned. W-201 local arrangement evidence only; no canonical world insertion is established.
14 ft
This is a local symmetric separation between mirrored rail axes, not a world-coordinate placement.
Drawing notation: BRONZE RAIL; SEE DETAIL SH. 213; HALF PLAN; CENTER LINE OF ENTRANCE; 7'-0"
Section C-C establishes the stair-following profile; the HALF PLAN establishes the local centerline offset. W-201 local arrangement evidence only; no canonical world insertion is established.
Calculated from: main-north-w201-rail-half-offset
2 count
Each run receives the W-213 Model No. 10 DOUBLE RAIL fabrication; this count does not reinterpret DOUBLE RAIL as the project run count.
Drawing notation: BRONZE RAIL; SEE DETAIL SH. 213; HALF PLAN; CENTER LINE OF ENTRANCE; 7'-0"
Section C-C establishes the stair-following profile; the HALF PLAN establishes the local centerline offset. W-201 local arrangement evidence only; no canonical world insertion is established.
Calculated from: main-north-w201-rail-half-offset
Recorded text value: W-213.
Drawing notation: BRONZE RAIL / SEE DETAIL SH. 213
W-201 local arrangement evidence only; no canonical world insertion is established.
W-201 shows a stair-following run and upper return, but no secure dimension is assigned to the complete rail path. Stair run or pixel length is not substituted.
Drawing notation: BRONZE RAIL; SEE DETAIL SH. 213; HALF PLAN; CENTER LINE OF ENTRANCE; 7'-0"
Section C-C establishes the stair-following profile; the HALF PLAN establishes the local centerline offset. W-201 local arrangement evidence only; no canonical world insertion is established.
Graphic circles/posts in the plan and elevation are not counted as an exact project quantity.
Drawing notation: BRONZE RAIL; SEE DETAIL SH. 213; HALF PLAN; CENTER LINE OF ENTRANCE; 7'-0"
Section C-C establishes the stair-following profile; the HALF PLAN establishes the local centerline offset. W-201 local arrangement evidence only; no canonical world insertion is established.
No secure printed post-spacing dimension is identified on W-201. W-213's 12-inch-on-center note applies to countersunk machine screws, not post spacing.
Drawing notation: BRONZE RAIL; SEE DETAIL SH. 213; HALF PLAN; CENTER LINE OF ENTRANCE; 7'-0"
Section C-C establishes the stair-following profile; the HALF PLAN establishes the local centerline offset. W-201 local arrangement evidence only; no canonical world insertion is established.
The entrance centerline has not been registered to an accepted facade or building-grid world X station, and the drawn half is not labeled east or west.
Drawing notation: BRONZE RAIL; SEE DETAIL SH. 213; HALF PLAN; CENTER LINE OF ENTRANCE; 7'-0"
Section C-C establishes the stair-following profile; the HALF PLAN establishes the local centerline offset. W-201 local arrangement evidence only; no canonical world insertion is established.
No accepted building-face, property-line or sidewalk station ties the local W-201 rail path to canonical world Z.
Drawing notation: BRONZE RAIL; SEE DETAIL SH. 213; HALF PLAN; CENTER LINE OF ENTRANCE; 7'-0"
Section C-C establishes the stair-following profile; the HALF PLAN establishes the local centerline offset. W-201 local arrangement evidence only; no canonical world insertion is established.
No compass or east/west label is securely printed in the reviewed region.
Drawing notation: BRONZE RAIL; SEE DETAIL SH. 213; HALF PLAN; CENTER LINE OF ENTRANCE; 7'-0"
Section C-C establishes the stair-following profile; the HALF PLAN establishes the local centerline offset. W-201 local arrangement evidence only; no canonical world insertion is established.
Nearby stair and landing dimensions do not securely terminate on the full rail path.
Drawing notation: BRONZE RAIL; SEE DETAIL SH. 213; HALF PLAN; CENTER LINE OF ENTRANCE; 7'-0"
Section C-C establishes the stair-following profile; the HALF PLAN establishes the local centerline offset. W-201 local arrangement evidence only; no canonical world insertion is established.
No construction or present-day photograph was inspected.
Drawing notation: BRONZE RAIL; SEE DETAIL SH. 213; HALF PLAN; CENTER LINE OF ENTRANCE; 7'-0"
Section C-C establishes the stair-following profile; the HALF PLAN establishes the local centerline offset. W-201 local arrangement evidence only; no canonical world insertion is established.
Numeric value unresolved
END draws two shaped open/capped member ends carried by bifurcated head. The existing 7½+7½ axis pitch is not either member's profile width.
Drawing notation: [no secure printed member width in reviewed END/side crop]
END draws two shaped open/capped member ends carried by bifurcated head. The existing 7½+7½ axis pitch is not either member's profile width.
7.5 in
Page-left member axis to central baluster axis in END view; not member width, clear gap, or spacing of separate project rail runs.
Drawing notation: 7½"
Page-left member axis to central baluster axis in END view; not member width, clear gap, or spacing of separate project rail runs.
7.5 in
Central baluster axis to page-right member axis in END view; independent printed half of the local fabrication chain.
Drawing notation: 7½"
Central baluster axis to page-right member axis in END view; independent printed half of the local fabrication chain.
15 in
Axis separation of two members within one DOUBLE RAIL run. Does not change W201's two mirrored runs or their 14-foot separation.
Drawing notation: 7½" + 7½" = 15"
Axis separation of two members within one DOUBLE RAIL run. Does not change W201's two mirrored runs or their 14-foot separation.
Calculated from: site1013a-w213-end-member-axis-half-left, site1013a-w213-end-member-axis-half-right
Source inventory is separate from the floor filters above. Select one drawing to inspect it; no drawing set is preloaded.