The measured building.

Drawing notation: SIZE MUST BE VERIFIED AND FIXTURES MADE TO SUIT

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Installation compatibility/field verification requirement preserved; no as-built stud accepted.

Drawing notation: IN OLD BUILDINGS ... GENERALLY [fraction] IN.

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Specific original stud fraction not secure.

Drawing notation: NEW BUILDINGS MAY HAVE [fraction] OR [fraction] STUDS

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. First listed stud option fraction unestablished.

Drawing notation: NEW BUILDINGS MAY HAVE [fraction] OR [fraction] STUDS

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Second listed stud option fraction unestablished.

Drawing notation: LOCATE SOCKETS OR RECEPTACLES SO LAMP FILAMENT IS IN CENTER OF BALL GLOBES AND ACORN GLOBES

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Component center alignment, not a room/world station.

Drawing notation: THEY SHALL BE AS SHOWN FOR TYPE B AND TYPE C GLOBES

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. This general-note C reference remains as printed separately from the glassware paragraph header G; it does not relabel that paragraph.

Drawing notation: REINFORCING PIECE FOR PENDENT SWITCH ARMS SHALL BE SOLDERED IN PLACE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

Drawing notation: ALL FINISH SHALL BE LIGHT OXIDIZED BRASS UNLESS OTHERWISE NOTED

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Default miscellaneous-sheet finish; preserve explicit flat-washable-cream424 exception and separate bronze P-type sheet finishes.

Drawing notation: [No independently legible arm-tubing process clause in the inspected GENERAL NOTES]

The candidate ALL TUBING USED FOR ARMS wording cannot be located securely in the inspected top general-note block. Exposed-parts brass and adjacent canopy/ring clauses do not establish arm manufacturing process.

Drawing notation: ALL BRASS SHELL SOCKETS SHALL HAVE AMPLE MEANS FOR HOLDING CAP TO SHELL [nipple-material clause not established]

Same socket block reads cap-retention AMPLE MEANS. This is not a nipple material specification; retain original null question without claiming a material.

Drawing notation: ALL FINISH SHALL BE PRODUCED BY ELECTRO PLATING UNLESS OTHERWISE NOTED

Same original general FINISH heading and immediately following clause. Printed exception preserved; no installed coating or broader intermediate-process closure asserted.

Drawing notation: [Dark-color intermediate operation wording remains partly blurred]

Yellow-brass polishing and dark-color recess retention already have verified prior records. Exact intervening operation/grain wording remains insecure in this crop and is not reconstructed from expected fabrication practice.