The measured building.

Drawing notation: THE UNIT SHELL AND THREADED CATCH TYPES ARE PREFERABLE

Printed original layer of this source fixture/type or clause only. No installed quantity, physical geometry, accepted outside/inside endpoints, building coordinates, room/floor host, field verification or historical revision authority established. Tight native crop reads UNIT independently; neighboring cap-retention clause already registered, reused. Does not determine nipple material.

Drawing notation: ALL EXPOSED PARTS OF FIXTURES SHALL BE MADE OF BRASS UNLESS OTHERWISE NOTED

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. This first clause concerns exposed parts; it does not establish an arm-tubing fabrication process.

Drawing notation: ALL OXIDIZED BRASS FINISH SHALL HAVE THE METAL HIGHLY POLISHED TO A YELLOW BRASS COLOR

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Verified preparation/color subclause; later scouring/grain words are not silently filled in.

Drawing notation: AND THEN DIPPED TO A DARK COLOR BEFORE SCOURING

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Specific process sequence only.

Drawing notation: ENOUGH OF THE DARK COLOR BEING LEFT IN THE RECESSES

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Color retention subclause only; no quantitative tone or relief-depth inference.

Drawing notation: ALL FIXTURES SHALL HAVE AN EVEN COAT OF HIGHEST GRADE LACQUER

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Final coat requirement; not a measured film thickness.

Drawing notation: WHICH AFTER DRYING SHALL HAVE A HARD SURFACE

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Qualitative result only; no numeric hardness criterion.

Drawing notation: USE No.18 [type letters unresolved] REINFORCED BROWN COTTON CORDS FOR PENDENT SWITCHES ETC.

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Gauge number18 independently resolved; gauge is not diameter or physical thickness. TypePF lettering retained separately with review gap.

Drawing notation: REINFORCED BROWN COTTON CORDS FOR PENDENT SWITCHES ETC.

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Application/cover wording; existing chain-silk conductor requirements remain separate.

Drawing notation: TYPE PF [letter pair tentative]

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Letter pair too soft for verified designation; No18 is independently secure.

Drawing notation: IN OLD BUILDINGS STUDS ARE GENERALLY 1/2 IN.

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Generic old-building stud nominal size; field-verification requirement still governs this courthouse, so no actual installed stud size follows.

Drawing notation: NEW BUILDINGS MAY HAVE [3/8?] STUDS

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Visible fraction resembles3/8 but numerator is insufficiently secure; both earlier option placeholders retained. No verified second numerical alternative follows.

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Reading exposed-parts brass closes source wording only; no independent arm-tubing manufacturing clause verified in this bounded source region.

Drawing notation: NEW BUILDINGS MAY HAVE 3/8 STUDS

Source-local type/detail, original printed layer; no installed quantity, room/floor assignment, world coordinate or accepted geometry. Inch unit inherited from immediately preceding old-building sentence; nominal stud designation. Single new-building fraction visible, no second option verified.

Drawing notation: USE No 18 TYPE PF REINFORCED BROWN COTTON CORDS FOR PENDENT SWITCHES ETC.

Source-local type/detail, original printed layer; no installed quantity, room/floor assignment, world coordinate or accepted geometry. PF printed type-letter designation; gauge18 and covering/application reuse prior verified properties.

Drawing notation: ALL TUBING USED FOR ARMS SHALL BE MADE OF ... UNLESS OTHERWISE NOTED

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. The specific tubing-process wording is not secure; retain the actual arm scope and await another exposure.

Drawing notation: ALL CANOPIES AND PLATES SHALL BE OF No20 B&S GAUGE BRASS

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Canopies/plates specifically brass; not all castings inferred brass.

Drawing notation: No20 B&S GAUGE BRASS

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Gauge is an identifier; no physical thickness conversion.

Drawing notation: SLIP AND SEATING RINGS SHALL BE OF SOLID TURNED METAL

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

Drawing notation: SECURED WITH No6-32 SCREWS

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Screw designation retained as text;6 and32 are not independent lengths.

Drawing notation: ALL BUSHINGS ... SHALL BE OF FIBRE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Preserve except-as-shown qualification; no all-component material assumption.

Drawing notation: COMPOSITION BUSHINGS WILL NOT BE ACCEPTED IN LIEU OF FIBRE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Authoring exclusion; do not replace with the composition/fiber receptacle illustrated on other sheets.

Drawing notation: CASINGS SHALL BE No20 B&S GAUGE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

Drawing notation: REMOVE ALL BURRS AND SHARP EDGES FROM WIRE WAYS

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

Drawing notation: PORCELAIN RECEPTACLES SHALL BE OF TYPE MOST SUITABLE FOR THE FIXTURES

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

Drawing notation: USE PORCELAIN KEY OR KEYLESS SOCKETS AS NOTED

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Conditional key/keyless choice requires the type callout, not a general single choice.

Drawing notation: ALL BRASS SHELL SOCKETS ... NIPPLE ...

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Nipple material clause is not fully secure; brass-shell socket term is readable but not enough to reconstruct full sentence.

Drawing notation: ALL BRASS SHELL SOCKETS SHALL HAVE AMPLE MEANS FOR HOLDING CAP TO SHELL

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

Drawing notation: ... SHELL AND THREADED CATCH TYPES ARE PREFERABLE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. First preferred shell-type word remains unresolved; threaded-catch preference readable.

Drawing notation: USE MOGUL SOCKETS WHERE NOTED IN THE LAMP SCHEDULE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Missing governing schedule controls application.

Drawing notation: ALL FIXTURES SHALL BE FINISHED BY ELECTRO-PLATING

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Readable first finish instruction only; following process/color clauses are not collapsed into guessed wording.

Drawing notation: ALL OXIDIZED BRASS ... [intermediate plating, cleaning and grain clauses unresolved]

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Identifiable intermediate finish clauses inspected; full words still require companion/master rereading.

Drawing notation: No16 SINGLE CONDUCTOR STRANDED SILK COVERED WIRE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. For chain-stem fixtures. Gauge number not conductor diameter.

Drawing notation: STRANDED SILK COVERED WIRE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Chain-stem conductor cover only.

Drawing notation: INTERLACED IN LINKS OF COLOR TO MATCH FIXTURE FINISH

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Electrical conductor in chain links; no chain installed position follows.

Drawing notation: WIRE FOR BRACKETS INCLOSED IN STEMS SHALL BE No16 N.E.C. WIRE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Printed bracket-stem wire gauge; no physical outside diameter.

Drawing notation: No16 N.E.C. WIRE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. N.E.C. abbreviation preserved without expansion.

Drawing notation: WIRE: USE No[uncertain] ... FOR PENDENT SWITCHES ETC

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. The specific pendant cord gauge is present but not secure; do not promote a guessed18.

Drawing notation: USE BRASS SHELL TYPE WITH OPERATING BUTTON IN THE SIDE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

Drawing notation: FINISH TO MATCH FIXTURE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Pendant-switch shell only.