The measured building.

distinct wall elevation compositions

3 count

Authoring eligible: false. Source audit state: verified-composition-count; four room walls represented.

wood species / finish-note revision

Authoring eligible: false. Source audit state: verified-word; exact member scope unresolved. Conflict group: library714-img0931-wood-species-revision.

original wood species wording

Authoring eligible: false. Source audit state: explicit-null. Conflict group: library714-img0931-wood-species-revision.

finish sample requirement

Authoring eligible: false. Source audit state: partial; remaining words and approved sample unavailable.

Physical Room 714 library geometry gate

The drawing explicitly requires contractor verification of measurements and job conditions. Complete wall lengths, vertical stacks, bay widths, panel/door/shelf quantities, profiles and dimension endpoints are not all readable or classified. The drawing is an oblique photograph with folds and local perspective; paper line lengths cannot be scaled safely. Original values and material words beneath yellow review markup remain obscured. The south-wall opening-like bays are not cross-walked one-to-one to f7-door-714-715 and f7-door-714-716. No fixture instances are safely classified. No checked IMG_0931 wall-elevation-to-plan or source-to-world transform exists.

Room 714 source-to-world placement gate

W8 / IMG_1219 is the sixth-floor plan. Room 714 is on the seventh floor, so a direct IMG_0931-to-W8 fit would be a floor-category error. W8 may inform shared building axes only through existing project conventions; it cannot place Room 714 millwork. The existing Room 714 polygon has 3.25-foot conservative uncertainty and unreviewed finish faces. IMG_0931 supplies wall-specific millwork plans/elevations but no accepted common controls, no scale-bearing whole-room plan and no checked orientation correspondence.

Analytical coordinate-control study gate

Only wall strips and elevations are shown; there is no complete orthogonal room plan with accepted common control points. Folds and perspective vary across the photographed sheet. Several candidate controls are revision annotations with obscured originals. Plan/elevation endpoints are not consistently classified as finish face, frame face, track centerline or member edge. No independent held-out checks can be formed without opening and registering a companion source.

original_exposed_material_clause

Original white-line exposed-material clause. Phil abbreviation is literal, not expanded. It remains separate from adjacent yellow revision text. Source-local reading only; installation, revision authority and geometry remain unchecked.

original_standards_backs_material_clause

Original white-line standards/back clause; adjacent yellow Mahogany stays separate. No installed material or revision selection. Source-local reading only; installation, revision authority and geometry remain unchecked.

finish_sample_requirement

Complete printed source clause in this IMG0931 witness. The physical approved sample, shellac/varnish product and installed finish remain unavailable. Source-local reading only; installation, revision authority and geometry remain unchecked.