Object: Seventh-floor Elevator No. 1 · W229 outside-enclosure east-west controls
Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
f7-elevator-1-w229-outside-enclosure-x-controlsverified · printed
Column 73 to Column 74 centerline span
15'-7"15.583333 ft
Printed overall dimension between the two named column axes on the W229 seventh-floor plan; also closes against the verified W400 perimeter controls.
IMG_1126 · sheet-W229 · Locate on drawing ↗Drawing notation: 15'-7"; 5'-2"; 2'-0 1/4"
W229 seventh-floor dimension chain between Columns 73 and 74 and the two outside enclosure faces. The chain establishes one-axis witness intersections only, not wall or shaft geometry.
f7-elevator-1-w229-outside-enclosure-x-controlsverified · printed
Column 73 axis to west/page-left outside enclosure face
5'-2"5.166667 ft
The reviewed extension endpoints terminate at the Column 73 centerline and the outside face of the elevator enclosure wall.
IMG_1126 · sheet-W229 · Locate on drawing ↗Drawing notation: 15'-7"; 5'-2"; 2'-0 1/4"
W229 seventh-floor dimension chain between Columns 73 and 74 and the two outside enclosure faces. The chain establishes one-axis witness intersections only, not wall or shaft geometry.
f7-elevator-1-w229-outside-enclosure-x-controlsverified · printed
East/page-right outside enclosure face to Column 74 axis
2'-0 1/4"2.020833 ft
The W229 seventh-floor plan repeats the enclosure-face-to-Column-74 witness already classified on the first-floor plan.
IMG_1126 · sheet-W229 · Locate on drawing ↗Drawing notation: 15'-7"; 5'-2"; 2'-0 1/4"
W229 seventh-floor dimension chain between Columns 73 and 74 and the two outside enclosure faces. The chain establishes one-axis witness intersections only, not wall or shaft geometry.
f7-elevator-1-w229-outside-enclosure-x-controlsverified · derived
West/page-left outside enclosure face intersection · world X
-73.41666666666666 ft-73.416667 ft
Exact one-axis coordinate at the dimension-witness row only; no finite wall segment is accepted.
IMG_1126 · sheet-W229 · Locate on drawing ↗Drawing notation: 15'-7"; 5'-2"; 2'-0 1/4"
W229 seventh-floor dimension chain between Columns 73 and 74 and the two outside enclosure faces. The chain establishes one-axis witness intersections only, not wall or shaft geometry.
Calculated from: column-73-registered-world-x, w229-f7-column73-to-west-outside-enclosure-face
f7-elevator-1-w229-outside-enclosure-x-controlsverified · derived
East/page-right outside enclosure face intersection · world X
-65.02083333333333 ft-65.020833 ft
Exact one-axis coordinate at the dimension-witness row only; no finite wall segment is accepted.
IMG_1126 · sheet-W229 · Locate on drawing ↗Drawing notation: 15'-7"; 5'-2"; 2'-0 1/4"
W229 seventh-floor dimension chain between Columns 73 and 74 and the two outside enclosure faces. The chain establishes one-axis witness intersections only, not wall or shaft geometry.
Calculated from: w229-control-column74-world-x, w229-f7-east-outside-enclosure-face-to-column74
f7-elevator-1-w229-outside-enclosure-x-controlsverified · derived
Outside enclosure-face span on Column 73-74 row
8.395833333333329 ft8.395833 ft
Span between outside enclosure faces along the printed witness row; not a clear shaft or rough opening.
IMG_1126 · sheet-W229 · Locate on drawing ↗Drawing notation: 15'-7"; 5'-2"; 2'-0 1/4"
W229 seventh-floor dimension chain between Columns 73 and 74 and the two outside enclosure faces. The chain establishes one-axis witness intersections only, not wall or shaft geometry.
Calculated from: w229-f7-column73-to-column74-span, w229-f7-column73-to-west-outside-enclosure-face, w229-f7-east-outside-enclosure-face-to-column74
f7-elevator-1-w229-outside-enclosure-x-controlsverified · derived
Outside enclosure-face midpoint · world X
-69.21875 ft-69.21875 ft
Midpoint of the outside-face span only; no assumption that the W235 clear rectangle is concentric.
IMG_1126 · sheet-W229 · Locate on drawing ↗Drawing notation: 15'-7"; 5'-2"; 2'-0 1/4"
W229 seventh-floor dimension chain between Columns 73 and 74 and the two outside enclosure faces. The chain establishes one-axis witness intersections only, not wall or shaft geometry.
Calculated from: w229-f7-west-outside-enclosure-face-world-x, w229-f7-east-outside-enclosure-face-world-x
f7-elevator-1-w229-outside-enclosure-x-controlsunreviewed · derived
W229 outside-face span minus W235 printed clear width
0.9999999999999956 ft1 ft
Diagnostic difference only. It must not be divided into two 6-inch walls unless corresponding faces and centering are independently established.
IMG_1126 · sheet-W229 · Locate on drawing ↗Drawing notation: 15'-7"; 5'-2"; 2'-0 1/4"
W229 seventh-floor dimension chain between Columns 73 and 74 and the two outside enclosure faces. The chain establishes one-axis witness intersections only, not wall or shaft geometry.
Calculated from: w229-f7-outside-enclosure-face-span, w235-img1156-elevator-1-clear-width
f7-elevator-1-w229-outside-enclosure-x-controlsunreviewed · derived
Provisional W235 clear-envelope center minus W229 outside-face midpoint
-0.4122500000000002 ft-0.41225 ft
Comparison of unlike face classes. The residual does not authorize shifting the W235 clear rectangle.
IMG_1126 · sheet-W229 · Locate on drawing ↗Drawing notation: 15'-7"; 5'-2"; 2'-0 1/4"
W229 seventh-floor dimension chain between Columns 73 and 74 and the two outside enclosure faces. The chain establishes one-axis witness intersections only, not wall or shaft geometry.
Calculated from: w235-img1156-elevator-1-diagnostic-center-x, w229-f7-outside-enclosure-center-world-x
f7-elevator-1-w229-outside-enclosure-x-controlsverified · observed
Accepted W235 clear-face world X coordinates
UnresolvedUnresolved: outside enclosure faces are now dimensioned, but the exact relation to W235's clear-plan faces is not yet independently established.
IMG_1126 · sheet-W229 · Locate on drawing ↗Drawing notation: 15'-7"; 5'-2"; 2'-0 1/4"
W229 seventh-floor dimension chain between Columns 73 and 74 and the two outside enclosure faces. The chain establishes one-axis witness intersections only, not wall or shaft geometry.
f7-elevator-1-w229-outside-enclosure-x-controlsverified · observed
Accepted seventh-floor Elevator No. 1 physical shaft transform
UnresolvedWithheld pending north-south face placement, wall construction, slab opening and corresponding-face checks.
IMG_1126 · sheet-W229 · Locate on drawing ↗Drawing notation: 15'-7"; 5'-2"; 2'-0 1/4"
W229 seventh-floor dimension chain between Columns 73 and 74 and the two outside enclosure faces. The chain establishes one-axis witness intersections only, not wall or shaft geometry.