Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.
464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.
Download the structured register (JSON)Object: Judge's bench enlarged-plan assembly
Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
0.75 in
Drawing scale only; not a pixel calibration.
Drawing notation: JUDGE'S BENCH — SCALE 3/4" = 1'-0"
Bounded W257 Room 602 component inventory; no source-to-building transform is accepted.
8.083333 ft
Bottom dimension line in enlarged bench plan. It is a local plan control; the incomplete outline prevents treating it as a complete 3D bounding box.
Drawing notation: 8'-1"
Bounded W257 Room 602 component inventory; no source-to-building transform is accepted.
4.875 ft
Left segment of the same bottom dimension chain; endpoint appears at the built-up-column centerline. Preserve independently from any inferred radius.
Drawing notation: 4'-10 1/2"
Bounded W257 Room 602 component inventory; no source-to-building transform is accepted.
3.208333 ft
Right segment of the bottom dimension chain. The two segment values sum to the printed 8'-1" overall control.
Drawing notation: 3'-2 1/2"
Bounded W257 Room 602 component inventory; no source-to-building transform is accepted.
5.041667 ft
Horizontal dimension across the upper inside run of the enlarged bench plan; it is not an overall bench width.
Drawing notation: 5'-0 1/2"
Bounded W257 Room 602 component inventory; no source-to-building transform is accepted.
2.25 ft
Horizontal width printed below the right L-shaped return in the enlarged bench plan.
Drawing notation: 2'-3"
Bounded W257 Room 602 component inventory; no source-to-building transform is accepted.
Numeric value unresolved
Bounded W257 Room 602 component inventory; no source-to-building transform is accepted.
87.5 in
Enlarged JUDGE'S BENCH plan: horizontal witness from the left projected setting-out line crossing the bench field to the inner face of the right return. The left line also participates in the lower8ft1 chain; not overall bench width, desk width or a clear room span.
Drawing notation: 7'-3 1/2"
Enlarged JUDGE'S BENCH plan: horizontal witness from the left projected setting-out line crossing the bench field to the inner face of the right return. The left line also participates in the lower8ft1 chain; not overall bench width, desk width or a clear room span.
38 in
Enlarged bench plan right exterior vertical witness from upper return edge to the lower inner horizontal line. Source-local plan projection; not3ft2.5 lower horizontal chain or a vertical dais height.
Drawing notation: 3'-2"
Enlarged bench plan right exterior vertical witness from upper return edge to the lower inner horizontal line. Source-local plan projection; not3ft2.5 lower horizontal chain or a vertical dais height.
9.5 in
Horizontal witness across the upper right bench return member from its inner face to outside face. The drawn member includes composite hatch/profile; not solid oak plank thickness.
Drawing notation: 9 1/2"
Horizontal witness across the upper right bench return member from its inner face to outside face. The drawn member includes composite hatch/profile; not solid oak plank thickness.
24 in
Short vertical witness beside the lower right inset from its top projection to the lower line near the column/return. Distinct endpoints from the2ft6 diameter; neither a column diameter nor bench elevation.
Drawing notation: 2'-0"
Short vertical witness beside the lower right inset from its top projection to the lower line near the column/return. Distinct endpoints from the2ft6 diameter; neither a column diameter nor bench elevation.
Source inventory is separate from the floor filters above. Select one drawing to inspect it; no drawing set is preloaded.