Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
f4-f5-stair-e-physical-flight-candidateverified · printed
total rise count
UP 20 RISERS / DOWN 20 RISERS20 count
verified source-local. Candidate only; no accepted physical flight, landing, shaft or floor cut.
IMG_1118 · sheet-W226 · Locate on drawing ↗Drawing notation: UP 20 RISERS / DOWN 20 RISERS
verified source-local; reused evidence: reused stair-e-w226-upper-stories-first.json and stair-e-upper-diagnostic-placement.json; no image reopened
Calculated from: w226-typical-up-riser-count, w226-typical-down-riser-count
f4-f5-stair-e-physical-flight-candidateverified · printed
one repeated long-run dimension
7′10½″7.875 ft
verified source-local; precise extension witness not classified. Candidate only; no accepted physical flight, landing, shaft or floor cut.
IMG_1118 · sheet-W226 · Locate on drawing ↗Drawing notation: 7′10½″
verified source-local; precise extension witness not classified; reused evidence: reused stair-e-w226-upper-stories-first.json and stair-e-upper-diagnostic-placement.json; no image reopened
Calculated from: w226-typical-run-dimension
f4-f5-stair-e-physical-flight-candidateverified · derived
fourth-floor analytical reference Y
FIN. 4TH FLOOR ELEV. 137.2544 ft
verified datum only. Candidate only; no accepted physical flight, landing, shaft or floor cut.
IMG_1212 · sheet-W6 · Locate on drawing ↗Drawing notation: FIN. 4TH FLOOR ELEV. 137.25
verified datum only; reused evidence: reused f4-w6-stair-e broad candidate locator and fourth-floor-w6-outer-face-registration.json; no image reopened
f4-f5-stair-e-physical-flight-candidateverified · derived
fifth-floor analytical reference Y
FIN. 5TH FLOOR ELEV. 148.7555.5 ft
verified datum only. Candidate only; no accepted physical flight, landing, shaft or floor cut.
IMG_1213 · sheet-W7 · Locate on drawing ↗Drawing notation: FIN. 5TH FLOOR ELEV. 148.75
verified datum only; reused evidence: reused provisional f5-stair-e envelope cited in stair-e-upper-diagnostic-placement.json; no image reopened
f4-f5-stair-e-physical-flight-candidateverified · derived
fourth-to-fifth finished-floor rise
148.75 − 137.2511.5 ft
verified vertical interval; not a flight profile. Candidate only; no accepted physical flight, landing, shaft or floor cut.
IMG_1212 · sheet-W6 · Locate on drawing ↗Drawing notation: 148.75 − 137.25
verified vertical interval; not a flight profile; reused evidence: reused f4-w6-stair-e broad candidate locator and fourth-floor-w6-outer-face-registration.json; no image reopened
IMG_1213 · sheet-W7 · Locate on drawing ↗Drawing notation: 148.75 − 137.25
verified vertical interval; not a flight profile; reused evidence: reused provisional f5-stair-e envelope cited in stair-e-upper-diagnostic-placement.json; no image reopened
Calculated from: gate-e-f4-f5-lower-y, gate-e-f4-f5-upper-y
f4-f5-stair-e-physical-flight-candidateunreviewed · inferred
candidate equal riser height
11′6″ / 206.9 in
diagnostic only; individual printed rise not checked. Candidate only; no accepted physical flight, landing, shaft or floor cut.
IMG_1118 · sheet-W226 · Locate on drawing ↗Drawing notation: 11′6″ / 20
diagnostic only; individual printed rise not checked; reused evidence: reused stair-e-w226-upper-stories-first.json and stair-e-upper-diagnostic-placement.json; no image reopened
Calculated from: gate-e-f4-f5-riser-count, gate-e-f4-f5-storey-rise
f4-f5-stair-e-physical-flight-candidateunreviewed · inferred
finite physical flight width between classified edges
UnresolvedNumeric value unresolved
display-fit four-foot width is not printed. Candidate only; no accepted physical flight, landing, shaft or floor cut.
IMG_1118 · sheet-W226 · Locate on drawing ↗Drawing notation: Unresolved physical property
display-fit four-foot width is not printed; reused evidence: reused stair-e-w226-upper-stories-first.json and stair-e-upper-diagnostic-placement.json; no image reopened
f4-f5-stair-e-physical-flight-candidateunreviewed · inferred
accepted building X/Z insertion origin and handed rotation
UnresolvedNumeric value unresolved
no classified non-collinear W226-to-W6/W7 controls with independent residuals. Candidate only; no accepted physical flight, landing, shaft or floor cut.
IMG_1118 · sheet-W226 · Locate on drawing ↗Drawing notation: Unresolved physical property
no classified non-collinear W226-to-W6/W7 controls with independent residuals; reused evidence: reused stair-e-w226-upper-stories-first.json and stair-e-upper-diagnostic-placement.json; no image reopened
IMG_1212 · sheet-W6 · Locate on drawing ↗Drawing notation: Unresolved physical property
no classified non-collinear W226-to-W6/W7 controls with independent residuals; reused evidence: reused f4-w6-stair-e broad candidate locator and fourth-floor-w6-outer-face-registration.json; no image reopened
IMG_1213 · sheet-W7 · Locate on drawing ↗Drawing notation: Unresolved physical property
no classified non-collinear W226-to-W6/W7 controls with independent residuals; reused evidence: reused provisional f5-stair-e envelope cited in stair-e-upper-diagnostic-placement.json; no image reopened