Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
f3-wall-stair-d-entryverified · printed
printed_nominal_partition_dimension
4″4 in
Printed dimension between partition reference lines. Material layers and finished-face offsets remain unresolved.
IMG_1114 · sheet-W224 · Locate on drawing ↗Drawing notation: 4″ / PARTITION AT 2ND, 3RD, 4TH & 5TH FLOORS
Ordinary-floor partition is shown separately from the seventh-floor partition and sixth-floor stair-hall condition.
f3-wall-stair-d-entryverified · printed
section_partition_applicability
PARTITION AT 2ND, 3RD, 4TH & 5TH FLOORSf3-wall-stair-d-entryverified · observed
horizontal_offset_endpoint_observation
1′4″ terminates at the stair-side partition reference lineRough-face versus finished-face meaning is not established by this endpoint observation.
IMG_1114 · sheet-W224 · Locate on drawing ↗Drawing notation: 1′4″ / PARTITION AT 2ND, 3RD, 4TH & 5TH FLOORS
The section distinguishes the two faces of the ordinary 4-inch partition. The 1′4″ arrow ends at the stair-side reference, not the partition centerline.
f3-wall-stair-d-entryunreviewed · observed
accepted_1ft4in_endpoint_face_category
UnresolvedRough, finish or another stair-side reference remains unresolved.
f3-wall-stair-d-entryunreviewed · observed
accepted_finished_assembly_thickness
UnresolvedNumeric value unresolved
The nominal 4-inch callout does not resolve applied finish layers.