detail · f1-elevator-doors-1-2-w217-detailModeling: not-modeled
W217 first-floor finished entrance detail for Elevators 1 and 2
Research representation: none. Architectural checks: pending.
First floor · Original mark: W217 · ELEVATOR No. 2 · ELEVATOR 1 SIMILAR
Source relationships · not a verified physical connection
- applies to (printed, verified): Elevator No. 1 threshold
- applies to (printed, verified): Elevator No. 2 threshold
16 recorded properties
Still to extract or check- Operating clear width and height after door travel
- Rough opening width and height
- Sill, threshold and head sections/build-up
- Individual leaf widths, thicknesses, overlap and travel
- Outer ornamental-surround dimensions
- Wall-face assignment and wall thickness
- Registered world position and orientation
- leaf count, operating type, direction, travel, overlap, guides and clear-open condition: The elevation shows two graphic door-face fields and a centerline but no equipment-side mechanics or travel diagram.
- jamb depth, return, projection and section profile: The 6-inch values are elevation face widths only; Section E is not present in the reviewed close-up as readable construction geometry.
- ornament vector trace, motif identity, thickness, relief depth, repeat pitch and fabrication geometry: The elevation and material callouts establish visible ornament and generic cast construction, not exact three-dimensional ornament.
- individual panel width, height, frame-layer widths and depth: Only selected offsets are printed. Panel sizes may not be derived from pixels or by subtracting visually symmetric gaps from the finished envelope.
- application of model 33 or 34 to earlier visually matching panel rows: Visual pattern matching alone does not establish printed model-number applicability.
- rough opening width, height and construction interfaces: The accepted 3'-6" by 6'-9 3/4" envelope is bounded by finished entrance faces, not rough construction.
- wall-face assignment, local station, world position and world orientation: No side-chain token was promoted to placement, and no detail-to-plan registration was performed in this package.