Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.
464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.
Download the structured register (JSON)Object: ELEVATOR No. 3
Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
Numeric value unresolved
Drawing notation: [not transcribed]
No reliable printed shaft dimension established by this bounded review. Diagram shape is not a measured shaft rectangle.
Numeric value unresolved
Drawing notation: [not transcribed]
No reliable printed shaft dimension established by this bounded review. Diagram shape is not a measured shaft rectangle.
Room boundary trace; not a printed clear dimension.
Drawing notation: ELEVATOR No. 3
Manually traced region in raw-upright JPEG coordinates; not an exact architectural measurement.
26.034 ft · estimated uncertainty ±2 ft
Drawing notation: ELEVATOR No. 3
Manually traced region in raw-upright JPEG coordinates; not an exact architectural measurement.
Calculated from: f1-elevator-3-footprint-trace
-64.061 ft · estimated uncertainty ±2 ft
Drawing notation: ELEVATOR No. 3
Manually traced region in raw-upright JPEG coordinates; not an exact architectural measurement.
Calculated from: f1-elevator-3-footprint-trace
34.202 ft · estimated uncertainty ±2 ft
Drawing notation: ELEVATOR No. 3
Manually traced region in raw-upright JPEG coordinates; not an exact architectural measurement.
Calculated from: f1-elevator-3-footprint-trace
-63.989 ft · estimated uncertainty ±2 ft
Drawing notation: ELEVATOR No. 3
Manually traced region in raw-upright JPEG coordinates; not an exact architectural measurement.
Calculated from: f1-elevator-3-footprint-trace
34.349 ft · estimated uncertainty ±2 ft
Drawing notation: ELEVATOR No. 3
Manually traced region in raw-upright JPEG coordinates; not an exact architectural measurement.
Calculated from: f1-elevator-3-footprint-trace
-56.954 ft · estimated uncertainty ±2 ft
Drawing notation: ELEVATOR No. 3
Manually traced region in raw-upright JPEG coordinates; not an exact architectural measurement.
Calculated from: f1-elevator-3-footprint-trace
25.783 ft · estimated uncertainty ±2 ft
Drawing notation: ELEVATOR No. 3
Manually traced region in raw-upright JPEG coordinates; not an exact architectural measurement.
Calculated from: f1-elevator-3-footprint-trace
-56.838 ft · estimated uncertainty ±2 ft
Drawing notation: ELEVATOR No. 3
Manually traced region in raw-upright JPEG coordinates; not an exact architectural measurement.
Calculated from: f1-elevator-3-footprint-trace
3 count
Authoring eligibility: identity-only. Placement eligibility: none. Source audit state: verified.
Drawing notation: ELEVATOR No. 3; LOBBY; RAMP DOWN; DIRECTORY BOARD
Raw pixels are upright; EXIF orientation must not be applied.
Authoring eligibility: route-inventory-only. Placement eligibility: no-common-shaft-yet. Source audit state: verified.
Drawing notation: 1ST FLOOR PLAN; 7'-0" CLEAR HATCH; 10'-0" CLEAR HATCH; 7'-5 3/4"; 2'-0 1/4"; column marks 71, 73, 74
The drawing was read from raw landscape pixels; camera EXIF orientation 6 was ignored for this region.
Drawing notation: 1ST FLOOR PLAN; 7'-4 1/2"; EL. 93.25; EL. 95.33; RAMP DOWN; stainless-steel lobby note; column marks 20, 21, 8, 9
Authoring eligibility: cross-reference-only. Placement eligibility: none. Dependency: Accepted column-center registration not established for this detail sheet. Source audit state: verified.
Drawing notation: 1ST FLOOR PLAN; 7'-4 1/2"; EL. 93.25; EL. 95.33; RAMP DOWN; stainless-steel lobby note; column marks 20, 21, 8, 9
8.041667 ft
Authoring eligibility: none. Placement eligibility: none. Dependency: Identify the shaft-side endpoint and the source datum/column face. Source audit state: conditional.
Drawing notation: 1ST FLOOR PLAN; 7'-4 1/2"; EL. 93.25; EL. 95.33; RAMP DOWN; stainless-steel lobby note; column marks 20, 21, 8, 9
Source inventory is separate from the floor filters above. Select one drawing to inspect it; no drawing set is preloaded.