Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.
464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.
Download the structured register (JSON)Object: Elevator 1 · W229 west outside enclosure face control
Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
-63 ft
Column-axis control only, inherited from registration-W229-first-floor-column-frame-to-W3.
Drawing notation: 74
Scalar coordinate retained from the accepted W229 symbolic column frame; it does not register undimensioned linework.
2.020833 ft
One horizontal face-to-axis witness only. It does not establish the face length, wall thickness, shaft polygon or a physical transform.
Drawing notation: 2'-0 1/4"
Endpoint classes were checked against the visible enclosure line and Column 74 centerline.
-65.020833 ft
Accepted world coordinate for the zero-thickness analytical face datum only; no finite line or wall volume is established.
Drawing notation: 2'-0 1/4"
Derived from the verified printed witness and accepted Column 74 world X.
Calculated from: w229-control-column74-world-x, w229-e1-west-enclosure-face-to-column74-axis
Numeric value unresolved
No accepted endpoint witness.
The inspected crop does not establish this endpoint.
Numeric value unresolved
No accepted endpoint witness.
The inspected crop does not establish this endpoint.
Numeric value unresolved
No classified opposite-face witness.
No classified opposite-face witness is present in the reviewed region.
Numeric value unresolved
The 7 by 10 foot clear hatch is known locally, but its relationship to this outside face is not yet accepted.
Drawing notation: 7'-0" CLEAR HATCH / 10'-0" CLEAR HATCH
Local clear-hatch dimensions are visible, but their relationship to the accepted outside face is unresolved.
One accepted X face coordinate is insufficient for a polygon or 3D transform.
One accepted X coordinate is insufficient to establish a physical transform.
-65.020833 ft
verified one-axis control. Missing hatch X edges, wall thickness, host face, sill and depth prohibit a finite physical solid.
Drawing notation: 2′-0¼″ to Column 74 axis
verified one-axis control; reuse of earlier source where indicated.
Calculated from: w229-control-column74-world-x, w229-e1-west-enclosure-face-to-column74-axis
Numeric value unresolved
unclassified endpoint. Missing hatch X edges, wall thickness, host face, sill and depth prohibit a finite physical solid.
unclassified endpoint; reuse of earlier source where indicated.
Numeric value unresolved
unclassified endpoint. Missing hatch X edges, wall thickness, host face, sill and depth prohibit a finite physical solid.
unclassified endpoint; reuse of earlier source where indicated.
Numeric value unresolved
opposite face not classified. Missing hatch X edges, wall thickness, host face, sill and depth prohibit a finite physical solid.
opposite face not classified; reuse of earlier source where indicated.
Source inventory is separate from the floor filters above. Select one drawing to inspect it; no drawing set is preloaded.