Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.
464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.
Download the structured register (JSON)Object: Support 82
Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
48.401269 ft · estimated uncertainty ±2.013766985 ft
Candidate support-center location; the prior trace may represent a steel column, concrete pilaster, stub, or entrance support. Member material/type requires the original schedule.
55.901452 ft · estimated uncertainty ±2.013766985 ft
Candidate support-center location; the prior trace may represent a steel column, concrete pilaster, stub, or entrance support. Member material/type requires the original schedule.
40 in
Shared printed schedule cell. Exact storey applicability and physical endpoints remain unresolved.
Drawing notation: B 40
41 in
Shared printed schedule cell. Exact storey applicability and physical endpoints remain unresolved.
Drawing notation: L 41
4 in
Thickness fraction deserves renewed high-resolution verification before fabrication or geometry.
Drawing notation: T 4
The distance arrow is printed; sign, baseline, and assignment to each grouped mark require a targeted recheck. This is not an absolute foot elevation.
Drawing notation: 10′6″
Common axis stated by the detail. Absolute canonical X remains unresolved.
Drawing notation: ℄ OF COL. (82) (68)
Candidate alignment, not an accepted equality of canonical X coordinates.
Drawing notation: 82 / 94
Raw master upright; rotate the stored 1650×2200 access WebP 90° clockwise to match this reference. Support symbols are visually aligned through the office partition. No independent numeric offset or securely identified continuous centerline witness was verified.
Candidate alignment, not an accepted equality of canonical Z coordinates.
Drawing notation: 82 / 83 / 84
Raw master upright; rotate the stored 1650×2200 access WebP 90° clockwise to match this reference. The wall and structural-rod graphics overlap the row; a verified column-center witness line or dimension chain is still needed.
Numeric value unresolved
Existing interior-column coordinates are foundation traces; candidate C94 alignment not accepted.
Existing interior-column coordinates are foundation traces; candidate C94 alignment not accepted.
Raw master upright; rotate the stored 1650×2200 access WebP 90° clockwise to match this reference. Existing interior-column coordinates are foundation traces; candidate C94 alignment not accepted.
Numeric value unresolved
Existing interior-column coordinates are foundation traces; candidate C84 alignment not accepted.
Existing interior-column coordinates are foundation traces; candidate C84 alignment not accepted.
Raw master upright; rotate the stored 1650×2200 access WebP 90° clockwise to match this reference. Existing interior-column coordinates are foundation traces; candidate C84 alignment not accepted.
Observed structural incidence, not a printed zero transverse offset. Only the endpoint/support identities C10/C68/C82/C94 are assigned; intermediate marks are not transcribed in this bounded task.
Drawing notation: C10 to C68 longitudinal framing path
Drawing notation: C68, C82, C94 framing path
Drawing notation: C82–C83–C84 framing line
Observed structural incidence, not a printed zero transverse offset. Only the endpoint/support identities C10/C68/C82/C94 are assigned; intermediate marks are not transcribed in this bounded task.
Drawing notation: C10 to C68 longitudinal framing path
Drawing notation: C68, C82, C94 framing path
Drawing notation: C82–C83–C84 framing line
49 ft
Drawing notation: C10–C68 framing path
Drawing notation: C68–C82–C94 framing path
Drawing notation: C68–C82–C94 framing path
Calculated from: interior-68-82-w400-perimeter-x-station, interior-68-82-w402-perimeter-x-station, interior-68-82-w400-longitudinal-framing-incidence, interior-68-82-w402-longitudinal-framing-incidence, assumption-interior-longitudinal-framing-line-equals-column-control
56 ft
Drawing notation: C82 transverse line
Drawing notation: C82 transverse line
Calculated from: interior-68-82-w400-perimeter-z-84, interior-68-82-w400-transverse-82-84, interior-68-82-w402-transverse-82-84, assumption-column-82-transverse-line-equals-column-control
Numeric value unresolved
No numeric offset is inferred from image pixels or from the foundation trace. Null does not mean zero.
Drawing notation: C82
Numeric value unresolved
Do not populate structural-registration.worldColumns from the candidate without resolving the control-to-column-center tie.
Drawing notation: C82
Calculated from: interior-68-82-column-82-candidate-x, interior-68-82-column-82-offset-x
Numeric value unresolved
No numeric offset is inferred from image pixels or from the foundation trace. Null does not mean zero.
Drawing notation: C82
Numeric value unresolved
Do not populate structural-registration.worldColumns from the candidate without resolving the control-to-column-center tie.
Drawing notation: C82
Calculated from: interior-68-82-column-82-candidate-z, interior-68-82-column-82-offset-z
The drawn beam/girder line may describe a member line or framing connection rather than the exact center of an eccentrically connected column. Schematic one-line representations do not prove zero eccentricity.
Drawing notation: C10–C68 framing path
Drawing notation: C68–C82–C94 framing path
Drawing notation: C68–C82–C94 framing path
Drawing notation: C10–C68 framing path
Drawing notation: C68–C82–C94 framing path
Drawing notation: C68–C82–C94 framing path
An eccentric attachment, unrecorded local center offset or schematic beam endpoint may differ from the actual column-control center.
Drawing notation: C82 transverse line
Drawing notation: C82 transverse line
Source inventory is separate from the floor filters above. Select one drawing to inspect it; no drawing set is preloaded.