Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.
464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.
Download the structured register (JSON)Object: Support 16
Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
-33.550198 ft · estimated uncertainty ±2.17757094 ft
Candidate support-center location; the prior trace may represent a steel column, concrete pilaster, stub, or entrance support. Member material/type requires the original schedule.
-49.156921 ft · estimated uncertainty ±2.17757094 ft
Candidate support-center location; the prior trace may represent a steel column, concrete pilaster, stub, or entrance support. Member material/type requires the original schedule.
44 in
Shared printed schedule cell. Exact storey applicability and physical endpoints remain unresolved.
Drawing notation: B 44
49 in
Shared printed schedule cell. Exact storey applicability and physical endpoints remain unresolved.
Drawing notation: L 49
4.75 in
Thickness fraction deserves renewed high-resolution verification before fabrication or geometry.
Drawing notation: T 4¾
The distance arrow is printed; sign, baseline, and assignment to each grouped mark require a targeted recheck. This is not an absolute foot elevation.
Drawing notation: 7′4″
-34 ft
selected-plan-region-single-reader. One-axis source result; no pad solid or accepted world Z bounds.
Drawing notation: C4/C16 continuous vertical centerline on foundation plan
C16 bounded extraction; selected-plan-region-single-reader. Z placement remains unresolved.
Calculated from: f16-c4-column-x
Numeric value unresolved
withheld. One-axis source result; no pad solid or accepted world Z bounds.
Drawing notation: local 7′0″ chain near C15/S2/C16
C16 bounded extraction; withheld. Z placement remains unresolved.
7 ft
checked-selected-master-region-single-reader. Column row is a drawing-coordinate control; no finite C16 pad is accepted.
Drawing notation: 7′0″ (middle segment of local vertical chain)
checked-selected-master-region-single-reader; The upper endpoint is the horizontal C13–C15 row line through C15; the lower endpoint is the C16 steel centerline. Page down is +Z. The neighboring upper interval appears 7′10″, conflicting with the earlier 7′0″ + 7′0″ + 7′0″ transcription; it is not used for this row step.
-49 ft
accepted-column-row-selected-regions. Column row is a drawing-coordinate control; no finite C16 pad is accepted.
accepted-column-row-selected-regions;
Calculated from: f16-repick-perimeter-row-z, f16-repick-c15-to-c16-row-step
Numeric value unresolved
unresolved; not a parent of C16 row coordinate. Column row is a drawing-coordinate control; no finite C16 pad is accepted.
Drawing notation: earlier extraction: 7′0″ + 7′0″ + 7′0″; current crop: upper segment appears 7′10″
unresolved; not a parent of C16 row coordinate;
Source inventory is separate from the floor filters above. Select one drawing to inspect it; no drawing set is preloaded.