Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
closure1011z-w228-ac-window-sectionverified · printed
plate_string_gauge_designation
10 GA PLATE STRING10 gauge
Window-section leader identifies plate string as 10 gauge. No conversion to thickness: gauge standard and metal specification are unresolved.
IMG_1265 · W-228 · Locate on drawing ↗Drawing notation: 10 GA PLATE STRING
Window-section leader identifies plate string as 10 gauge. No conversion to thickness: gauge standard and metal specification are unresolved.
closure1011z-w228-ac-window-sectionverified · printed
marble_string_thickness
1" THICK MARBLE STRING1 in
Printed leader specifies marble string thickness at window section, separate from plate string. Does not establish total wall/landing thickness or installed length.
IMG_1265 · W-228 · Locate on drawing ↗Drawing notation: 1" THICK MARBLE STRING
Printed leader specifies marble string thickness at window section, separate from plate string. Does not establish total wall/landing thickness or installed length.
closure1011z-w228-ac-window-sectionverified · printed
channel_nominal_depth
10" CHANNEL10 in
Leader in A/C typical window section identifies nominal channel depth. Distinct from the previously recorded 10-inch channel in the two-riser landing condition; profile series, length and connections remain unknown.
IMG_1265 · W-228 · Locate on drawing ↗Drawing notation: 10" CHANNEL
Leader in A/C typical window section identifies nominal channel depth. Distinct from the previously recorded 10-inch channel in the two-riser landing condition; profile series, length and connections remain unknown.
closure1011z-w228-ac-window-sectionverified · printed
window_plate_string_printed_depth
10″ × ¼″ PLATE STRING10 in
Source1122 window leader specifies10in plate-string depth and¼in thickness separately. Prior1265 reading10 GA is preserved as different-exposure disagreement pending same-glyph reinspection; no gauge conversion or physical profile approval.
IMG_1122 · W-228 · Locate on drawing ↗Drawing notation: 10″ × ¼″ PLATE STRING
Source1122 window leader specifies10in plate-string depth and¼in thickness separately. Prior1265 reading10 GA is preserved as different-exposure disagreement pending same-glyph reinspection; no gauge conversion or physical profile approval.
Calculated from: closure1011z-img1265-string-gauge
Conflicting readings: closure1011z-img1265-string-gauge
closure1011z-w228-ac-window-sectionverified · printed
window_plate_string_printed_thickness
10″ × ¼″ PLATE STRING0.25 in
Quarter-inch term in the same1122 window plate-string clause, separate from marble-string thickness and10in channel. Cross-source10 GA reading remains preserved; different source does not authorize withdrawal.
IMG_1122 · W-228 · Locate on drawing ↗Drawing notation: 10″ × ¼″ PLATE STRING
Quarter-inch term in the same1122 window plate-string clause, separate from marble-string thickness and10in channel. Cross-source10 GA reading remains preserved; different source does not authorize withdrawal.
Calculated from: closure1011z-img1265-string-gauge
Conflicting readings: closure1011z-img1265-string-gauge
closure1011z-w228-ac-window-sectionunreviewed · observed
window_plate_string_metal_material_unresolved
PLATE STRING [metal composition not independently labelled in this leader]Plate-string designation and dimension do not establish steel/iron material or grade; assembly catalogue legend is not a component material assignment.
IMG_1122 · W-228 · Locate on drawing ↗Drawing notation: PLATE STRING [metal composition not independently labelled in this leader]
Plate-string designation and dimension do not establish steel/iron material or grade; assembly catalogue legend is not a component material assignment.
closure1011z-w228-ac-window-sectionillegible · printed
window_lower_channel_profile_width_unresolved
[small lower flange/profile fraction not certified]Numeric value unresolved
Lower cross-section flange/body witness at window section remains uncertified. Existing10in channel depth and1in marble string are reused, not substituted for this width.
IMG_1122 · W-228 · Locate on drawing ↗Drawing notation: [small lower flange/profile fraction not certified]
Lower cross-section flange/body witness at window section remains uncertified. Existing10in channel depth and1in marble string are reused, not substituted for this width.
Calculated from: closure1011z-img1265-window-channel-depth, closure1011z-img1265-marble-string-thickness