← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs: 464
Identified objects: 4872
Verified printed values: 12046
Disputed values: 20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

7 matching properties

Object: Masonry anchor bar shown above B-B

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

closure1011aa-img0991-masonry-anchorverified · printed

anchor_bar_width

2 in

Source-local detail only.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: 2"

Source-local detail only.

closure1011aa-img0991-masonry-anchorverified · printed

anchor_bar_masonry_projection

4 in

Source-local detail only. Dimension extends from masonry-face line to dashed anchor end; no embedment derived from photo scale.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: 4"

Source-local detail only. Dimension extends from masonry-face line to dashed anchor end; no embedment derived from photo scale.

closure1011aa-img0991-masonry-anchorverified · printed

anchor_eye_height

2 in

Source-local detail only.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: 2"

Source-local detail only.

closure1011aa-img0991-masonry-anchorverified · printed

bill_masonry_anchor_thickness

186 ½ × 2" × 6⅜ [length candidate] MASONRY ANCHORS

0.5 in

Source-local detail only. Thickness token ½ is legible in bill; length fraction remains provisional.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: 186 ½ × 2" × 6⅜ [length candidate] MASONRY ANCHORS

Source-local detail only. Thickness token ½ is legible in bill; length fraction remains provisional.

closure1011aa-img0991-masonry-anchorunreviewed · printed

bill_masonry_anchor_length_candidate

6⅜ [fraction candidate]

6.375 in

Source-local detail only. Bill length fraction needs cleaner source evidence; not accepted. Review correction review-correction-20261013j-closure1011aa-img991-bill-anchor-length: The crop of the same IMG_0991 bill row reads 6 1/8 in, confirming the existing verified reread and disproving the earlier 6 3/8 candidate. Retain the previous candidate as a review trail.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: 6⅜ [fraction candidate]

Source-local detail only. Bill length fraction needs cleaner source evidence; not accepted.

closure1011aa-img0991-masonry-anchorverified · printed

bill_masonry_anchor_length_reread

186 ½ × 2" × 6⅛ MASONRY [right continuation clipped]

6.125 in

Master bill crop clearly shows single vertical numerator 1 over denominator 8 following 6. Supersedes prior unreviewed 6⅜ candidate as a source reading; historic record retained. No geometry acceptance implied.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: 186 ½ × 2" × 6⅛ MASONRY [right continuation clipped]

closure1011aa-img0991-masonry-anchorverified · printed

bill_masonry_anchor_width

186 ½" × 2" × 6⅛" MASONRY [continuation clipped]

2 in

Depicted type/component or shop-order row only; no installed quantity or accepted physical geometry. Width in bill triplet. Existing verified 6⅛in length reused; earlier 6⅜ candidate remains preserved.

IMG_0991 · 640 · Locate on drawing ↗

Drawing notation: 186 ½" × 2" × 6⅛" MASONRY [continuation clipped]

Calculated from: hardware1012s-991-bill-masonry-anchor-length

Source-by-source coverage

Source inventory is separate from the floor filters above. Select one drawing to inspect it; no drawing set is preloaded.