← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs: 464
Identified objects: 4872
Verified printed values: 12046
Disputed values: 20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

5 matching properties

Object: Basement finish recess notes

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

b-finish-recess-rulesunreviewed · observed

Located source-space footprint; physical coordinates unresolved

0 source-space vertices; no world registration

Source locator only, not a measured room polygon. Original vertices remain in the extraction package.

IMG_1199 · Locate on drawing ↗

Drawing notation: CONCRETE SLAB TO BE2″ BELOW FINISH FL.FOR MARBLE FLOOR AND1½″ FOR TILE FLOOR.

Upright1650×2200 WebP close-up; this region must not be applied directly to the unrotated master.

b-finish-recess-rulesunreviewed · observed

footprint-trace

Location only; closed enclosure unresolved

No polygon accepted

IMG_1199 · Locate on drawing ↗

Drawing notation: CONCRETE SLAB TO BE2″ BELOW FINISH FL.FOR MARBLE FLOOR AND1½″ FOR TILE FLOOR.

Upright1650×2200 WebP close-up; this region must not be applied directly to the unrotated master.

b-finish-recess-rulesillegible · observed

clear-height

Not read

Numeric value unresolved

IMG_1199 · Locate on drawing ↗

Drawing notation: CONCRETE SLAB TO BE2″ BELOW FINISH FL.FOR MARBLE FLOOR AND1½″ FOR TILE FLOOR.

Upright1650×2200 WebP close-up; this region must not be applied directly to the unrotated master.

b-finish-recess-rulesverified · printed

slab-recess-marble

2″ below finish floor for marble floor

2 in

Only locations using marble finish; not a general basement depression.

IMG_1199 · Locate on drawing ↗

Drawing notation: CONCRETE SLAB TO BE2″ BELOW FINISH FL.FOR MARBLE FLOOR AND1½″ FOR TILE FLOOR.

Upright1650×2200 WebP close-up; this region must not be applied directly to the unrotated master.

b-finish-recess-rulesverified · printed

slab-recess-tile

1½″ below finish floor for tile floor

1.5 in

Only locations using tile finish.

IMG_1199 · Locate on drawing ↗

Drawing notation: CONCRETE SLAB TO BE2″ BELOW FINISH FL.FOR MARBLE FLOOR AND1½″ FOR TILE FLOOR.

Upright1650×2200 WebP close-up; this region must not be applied directly to the unrotated master.

Source-by-source coverage

Source inventory is separate from the floor filters above. Select one drawing to inspect it; no drawing set is preloaded.