The measured building.

type_a_material

Selected source-access normalized region; printed/type-local property. Nominal pipe/casing sizes are not measured outside diameters. Assignment labels establish intended type use only. Source access orientation recorded at image level.

type_b_material

Selected source-access normalized region; printed/type-local property. Nominal pipe/casing sizes are not measured outside diameters. Assignment labels establish intended type use only. Source access orientation recorded at image level.

type_c_material

Selected source-access normalized region; printed/type-local property. Nominal pipe/casing sizes are not measured outside diameters. Assignment labels establish intended type use only. Source access orientation recorded at image level. Review correction review-correction-20261013e-glassware-g-label: The same glassware paragraph on IMG1292 reads TYPE G, not TYPE C. White-opal material is consistent but the prior type attribution is withdrawn. Separate general-construction TYPE C clauses are not corrected or relabeled.

type_d_material

Selected source-access normalized region; printed/type-local property. Nominal pipe/casing sizes are not measured outside diameters. Assignment labels establish intended type use only. Source access orientation recorded at image level. Review correction review-correction-20261013e-glassware-or-material: The same paragraph specifies REFLECTORS TYPE OR and pressed white-opal glass. The earlier TYPE D/pressed soda-silicate attribution is a transcription error, not a competing material revision.

type_d_lamp_small_power

50 W

Selected source-access normalized region; printed/type-local property. Nominal pipe/casing sizes are not measured outside diameters. Assignment labels establish intended type use only. Source access orientation recorded at image level. Review correction review-correction-20261013e-glassware-or-small-lamp-scope: The numeric 50W token remains correct but the earlier TYPE D attribution is not. This historic record is withdrawn from type-assigned authoring; the new OR-scoped properties retain the same lamp option. No installed lamp rating follows.

type_d_lamp_large_power

Selected source-access normalized region; printed/type-local property. Nominal pipe/casing sizes are not measured outside diameters. Assignment labels establish intended type use only. Source access orientation recorded at image level. Review correction review-correction-20261013e-glassware-or-large-lamp-scope: The 75 and100W tokens remain correct but belong to the OR reflector paragraph, not TYPE D. Original wording and values remain in this withdrawn attribution record; corrected OR-specific properties are separate.

type_m_material

Selected source-access normalized region; printed/type-local property. Nominal pipe/casing sizes are not measured outside diameters. Assignment labels establish intended type use only. Source access orientation recorded at image level. Review correction review-correction-20261013e-glassware-mr-label: The same paragraph header is TYPE MR, not TYPE M. Porcelain-enamel steel itself remains materially consistent; only the prior type attribution is withdrawn.

type_m_lamp_limit

75 W

Selected source-access normalized region; printed/type-local property. Nominal pipe/casing sizes are not measured outside diameters. Assignment labels establish intended type use only. Source access orientation recorded at image level. Review correction review-correction-20261013e-glassware-mr-lamp-limit: The same TYPE MR paragraph reads LAMPS50 WATTS OR LESS. The older at-least75W transcription has the wrong number and reverses the limit. Retain it solely as an extraction audit record, not a historical specification alternative.

type_a_large_specification_designation_resolved

Source-local type/detail, original printed layer; no installed quantity, room/floor assignment, world coordinate or accepted geometry. A11 refers to preceding11-or12-inch-diameter,14-inch-deep,6-inch-holder acorn-globe requirement; no installed schedule mapping.

Calculated from: lightspec1013e-img1292-063-type_a_large_specification_designation

type_b_6in_ball_holder_fraction_resolved

3.25 in

Source-local type/detail, original printed layer; no installed quantity, room/floor assignment, world coordinate or accepted geometry. Holder nominal size paired with6in ball; not globe wall thickness.

Calculated from: lightspec1013e-img1292-069-type_b_6in_holder_size, lightspec1013e-img1292-068-type_b_6in_ball_diameter

type_b_7in_ball_holder_fraction_resolved

3.25 in

Source-local type/detail, original printed layer; no installed quantity, room/floor assignment, world coordinate or accepted geometry. Holder nominal size paired with7in ball; not globe wall thickness.

Calculated from: lightspec1013e-img1292-071-type_b_7in_holder_size, lightspec1013e-img1292-070-type_b_7in_ball_diameter

glassware_or_reflector_requirement

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

type_a_form

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

Calculated from: detail-lighting-img1292-glassnotes-type_a_material

type_a_large_diameter_option_1

11 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. First printed alternative large A-globe diameter; not a conflicting revised value.

type_a_large_diameter_option_2

12 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Second printed alternative large A-globe diameter.

type_a_large_depth

14 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

type_a_large_holder_size

6 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Nominal holder size; no outside-diameter/gauge convention invented.

type_a_large_specification_designation

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Designation appears A11; numeral suffix not secure enough for a confirmed schedule key.

type_a_small_diameter

8 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

type_a_small_depth

9.5 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

type_a_small_holder_size

4 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

type_b_form

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

Calculated from: detail-lighting-img1292-glassnotes-type_b_material

type_b_6in_ball_diameter

6 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Generally-used B-ball size list; dimension variant only.

type_b_6in_holder_size

Numeric value unresolved

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Holder nominal size paired with this list diameter; no installed inventory.

type_b_7in_ball_diameter

7 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Generally-used B-ball size list; dimension variant only.

type_b_7in_holder_size

Numeric value unresolved

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Holder nominal size paired with this list diameter; no installed inventory.

type_b_8in_ball_diameter

8 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Generally-used B-ball size list; dimension variant only.

type_b_8in_holder_size

4 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Holder nominal size paired with this list diameter; no installed inventory.

type_b_10in_ball_diameter

10 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Generally-used B-ball size list; dimension variant only.

type_b_10in_holder_size

4 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Holder nominal size paired with this list diameter; no installed inventory.

type_b_12in_ball_diameter

12 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Generally-used B-ball size list; dimension variant only.

type_b_12in_holder_size

6 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Holder nominal size paired with this list diameter; no installed inventory.

type_g_header_reading_resolution

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Same glassware paragraph previously transcribed C; targeted raw master header reads G. General construction notes independently mention type C, which remains separate.

Conflicting readings: detail-lighting-img1292-glassnotes-type_c_material

type_g_material_resolved

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Material previously recorded for wrong paragraph label C is white opal and remains materially consistent; corrected label G only.

Calculated from: lightspec1013e-img1292-078-type_g_header_reading_resolution

Conflicting readings: detail-lighting-img1292-glassnotes-type_c_material

type_g_form_optics

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

Calculated from: lightspec1013e-img1292-078-type_g_header_reading_resolution

type_g_spec_reference

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

Calculated from: lightspec1013e-img1292-078-type_g_header_reading_resolution

type_g_reference_diameter

16 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

Calculated from: lightspec1013e-img1292-078-type_g_header_reading_resolution

type_g_minimum_depth

10 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Minimum depth for16in reference globe; not total fixture drop.

Calculated from: lightspec1013e-img1292-078-type_g_header_reading_resolution

type_g_other_size_proportion

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. The referenced list still needs locating; no unprinted derived size generated.

Calculated from: lightspec1013e-img1292-078-type_g_header_reading_resolution

type_or_header_reading_resolution

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Same paragraph formerly transcribed D. Clear OR header; previous D assignment does not survive this reading. Lamp numbers50/75/100 remain numerically present but their type label is corrected.

Conflicting readings: detail-lighting-img1292-glassnotes-type_d_material detail-lighting-img1292-glassnotes-type_d_lamp_small_power detail-lighting-img1292-glassnotes-type_d_lamp_large_power