← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs: 464
Identified objects: 4872
Verified printed values: 12046
Disputed values: 20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

IMG_1099 · Folder 191

Lobby & Foyer Details — Foyer Doors, Bulletin Boards, Bay Q, Etc.

Sheet W-218

Extraction: Reviewed · extraction partial. The W-218 lobby-writing-desk region was reviewed text-first, then as one full upright WebP and sequential focused crops. Side/end elevations, half top plan, half underside plan, Section A-A and pen-tray section were inspected. The remainder of W-218 is outside this bounded extraction. The desk profile/detail regions named in this package were reviewed. Unreadable and unspecified properties remain explicit; the rest of W-218 is outside scope. Reused lobby-writing-desk-first.json; no source image reopened. Reused the verified W218 lobby-writing-desk envelope and support-layout extraction; no drawing reopened. Bounded W218 plate type and W3 plan-candidate gate; not an installed desk placement. Main Street foyer/lobby door-screen line, bulletin cases, bronze directory and lobby furniture family. Normalized from an existing text re-audit; this import did not reopen the source image. W3 Main foyer/public lobby screen physical-polygon gate; source group review remains partial. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. Main/foyer-lobby Bay U screen physical-segment gate; no finite solid authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Partial timed visual review: Source-local additive printed detail evidence; no installed quantity, operating clear dimensions, room geometry or accepted placement. Partial timed visual review: Source-local printed detail or selected note only. No installed quantity, clear opening, building placement or accepted geometry established. Partial timed visual review: undefined Partial timed visual review: Desk Section A-A / pen tray and adjacent directory model marks

Unresolved extraction work

Several small Section A-A substrate, channel, washer/bolt and attachment notes remain illegible.
The small pen-tray dimension was not promoted and remains null.
Leg/core sections, scroll curvature/section and ornament contours are not dimensioned in the reviewed legible callouts.
Metal alloy and finish are not established by the desk callouts.
Installed desk quantity, exact positions, orientations and as-built survival remain unverified.
No source-relative vector trace, photograph registration or pixel-to-inch conversion was performed.
w218-desk-missing-top-edge-profile: Small Section A-A notes remain partly illegible; pixel scaling is prohibited.
w218-desk-missing-top-edge-minor-note: Only the beginning appears to read PRESS...; it was not promoted.
w218-desk-missing-screw-specification: SCREWS is legible; the adjoining specification is not.
w218-desk-missing-angle-material: The size and ANGLE designation are printed, but the material is not legible.
w218-desk-missing-channel-weight: Only 4-inch channel is legible.
w218-desk-missing-shell-section: The shell is visible around the channel; its small fraction cannot be read reliably.
w218-desk-missing-pierced-trace: Elevation linework supports only a qualitative narrow vertical field.
w218-desk-missing-apron-trace: No source-relative trace was made and no dimensions are printed.
w218-desk-missing-scroll-profile: End elevation establishes topology and symmetry only.
w218-desk-missing-pen-tray-depth: The 3 1/4-inch cross-section width is legible; no depth dimension is.
w218-desk-missing-pen-tray-details: These are visible but not dimensioned.
w218-desk-missing-washer-thickness: Only the 4 x 4 inch plan size is printed.
w218-desk-missing-slab-depth: The section labels the slab underside but supplies no reliable depth.
w218-desk-missing-metal-alloy-finish: Desk-specific callouts say cast metal, pierced ornament and steel plate; they do not identify the ornamental alloy or finish.
W-218 has no installed quantity, plan coordinates, rotation or keyed W3 symbol in the reviewed desk detail.
As-built correspondence remains unresolved.
Leg sections, scroll curvature, ornament profile and relief, frame/apron profiles, pen tray, alloy and finish remain unresolved.
W218 does not print installed coordinates or a W3 detail key.
10-inch plate axis relative to desk length
plate-center position relative to support centerline
base-plate hole positions and diameters
steel grade and finish
accepted W3-to-W218 physical type/instance mapping and as-built transforms
Complete drawing-note transcription
Every dimension and bay placement
Detailed hardware/fastener schedule
Exact cross-sheet bay correspondence
Cross-photo physical deduplication
Complete surviving-object inventory
Exact dimensions
Construction/alteration chronology
Condition assessment
P-6 component extraction
Installed fixture schedule and positions
As-built correspondence
Fixture finish and glass color
segment-by-segment material and face classes
accepted W3-to-detail endpoint/face registration with independent held-out check
world XZ footprints and depths for each pier/screen segment
six finished jamb X limits on each side plus rough openings and reveals
door/head and transom limits
checked threshold bottom and finished screen/pier top elevations
resolution of the lobby ceiling reading conflict and scope
securely dimensioned and registered threshold bottom/top
door head and upper glazing bottom/top with clear dimension endpoints
finished screen/pier top on both room sides
front/back finished face assignments and segment-specific transverse depths
accepted W3-to-W217/W218 face/endpoint registration with held-out check
physical XZ segment and six finished door-gap polygons
classified north/south finished face or axis and world Z control
segment-by-segment thickness and joins
accepted west/east pier or bay-division edge class
finished jamb limits on both faces
threshold bottom/top and door head in local Y
finished upper screen and pier bounds
independent held-out metric registration
Two classified finished host-wall face stations and a closed host segment
Frame outer/inner face depths, actual section thickness and reveal return
Accepted left/right finished frame jamb stations and rough opening limits
Frame sill/threshold top and underside tied to the exterior landing and first-floor finish
Frame head elevation and vertical transom/glazing limits
Material/profile build-up for bronze frame and glass
Accepted opening cut through the host wall and as-built correspondence
Fine fractions, witness endpoint classification, and remaining note transcription require targeted crop review
Companion/revision authority and installed room/floor registration remain outstanding
Modeling and whole-building acceptance checks not performed
Uninspected regions and fine fractions remain outstanding
Source-to-installed-object mapping and revision authority unresolved
Whole-building acceptance not performed
Section A-A small substrate, edge, screw and shell-fraction notes remain unreadable; no angle alloy or scroll material is established; pen-tray depth is not dimensioned in inspected section.
Installed instance mapping, world placement, companion/revision authority and whole-building acceptance remain unresolved.
Installed instance quantity, floor/room registration, physical transforms and as-built correspondence remain unresolved.
All uninspected regions, remaining notes/fractions/profiles, companion details and historical revision authority remain open.
Whole-building architectural acceptance has not been performed.
Section A-A small substrate/edge/screw/shell notes remain insufficiently legible; no exact profile or screw specification promoted.

Download OCR observations (unverified)

Loading the selected drawing…

Scroll or pinch to inspect this drawing. Archival drawing photograph · Oregon Historical Society research collections.

Open source image separately ↗

33 matching objects

An identified object is not a fully modeled object. Missing dimensions, locations and relationships remain explicit.

furniture · furniture-w218-lobby-writing-desk-detail-01Modeling: not-modeled

W-218 lobby writing-desk drawing-detail specimen

Research representation: none. Architectural checks: pending.

First floor

The printed heading says DETAILS OF LOBBY DESKS on first-floor lobby/foyer sheet W-218. Exact installed coordinates, orientation and quantity are not scheduled in the reviewed region.

Source relationships · not a verified physical connection

type associated with (printed, verified): PUBLIC LOBBY

7 recorded properties

Still to extract or check

Installed quantity
Installed positions and rotations
As-built correspondence
Metal alloy and finish
Top edge and substrate profiles
Leg cross sections
Ornament relief depths
Pen-tray complete dimensions
Fastener sizes

Lobby & Foyer Details — Foyer Doors, Bulletin Boards, Bay Q, Etc.

33 matching objects

W-218 lobby writing-desk drawing-detail specimen

Framed writing top and underside support assembly

Black-glass writing surface

Top pen-tray assembly

Repeated pier-like desk leg/support prototype

Cast and pierced metal ornament family

Curved end-view scroll support/bracket prototype

Lobby writing desk

Top edge and perimeter frame profile

Continuous cast-metal ornamental apron band

Underside fastening-angle frame

Four-inch channel support core

Decorative support shell and stepped foot

Support base plate, bolts and slab washers

Central parallel-grooved pen field

Circular end recess in pen tray

W3 public-lobby DESK symbol group

Four correlated W218 public-lobby desk analytical instances

Rectangular steel support base plate

W3 public-lobby bay U

First-floor public postal lobby architectural envelope

Continuous public postal service and lockbox wall system

Main Street foyer-to-public-lobby transparent door and screen line

Main foyer bronze-framed bulletin/display case

Main foyer-to-public-lobby glazed metal door pair

W-218 bronze-framed foyer bulletin/display case

Postal workroom staff-side casework system — extraction pending

Registry, box and parcel-post alcove group

Public lobby lockbox zone

Public lobby staffed-service and depository zone

Plate glass in postal and door-screen assemblies

Main Street center exterior framed entrance candidate

Foyer doors and bronze directory