← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs: 464
Identified objects: 4872
Verified printed values: 12046
Disputed values: 20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

IMG_1087 · Folder 191

DETAILS OF ORNAMENTAL METALWORK

Sheet W-213

Extraction: Reviewed · extraction partial. W-213 title block; Main entrance handrail elevation; Main entrance baluster/post and anchorage; Main entrance title and Sheet 201 cross-reference Reused verified 2-foot-10-inch rail height and Model No. 10 fabrication identity. Partial timed visual review: Source-local additive detail review; no installed quantity, accepted room geometry, physical placement or wall cuts established. Partial timed visual review: Source-local grille specimen detail; installed quantities and cast alloy not inferred from neighboring handrail. Partial timed visual review: Printed source-local type/component or section control only; no accepted physical geometry, installed quantity or world registration. Original layer retained separately from revisions. Partial timed visual review: END/post native crop rechecked. Paired 7½-inch axis controls and ornamental model marks do not establish member/shaft outside width. Partial timed visual review: Main rail END/fork/side/support detail; source-local member/support geometry only. District Court and exterior grilles/property-line rails are separate regions. Partial timed visual review: undefined Partial timed visual review: Single upright targeted Main rail crop; prior 15-inch double-member axis pitch and bottom pole diameters reused without reopening their sources. No pixel widths promoted as measured profiles.

Highlighted reading: EXTRUDED SHAPES ON BRONZE DOOR GRILLES. Paired construction note distinguishes bronze door shapes from window cast iron. No thickness or alloy specification.

Show every recorded property on this drawing →

Unresolved extraction work

Flagpole/eagle details
District Court grille details
Exterior door/window grille details
Property-line pipe-rail/balustrade details
All model-numbered ornaments outside the Main entrance handrail
Rail member cross sections
Complete ornamental geometry
Post placement
As-built correspondence
Fine dimension fractions, witness endpoints and remaining small material callouts require targeted high-resolution review
Companion sheets, duplicate photographs and revision authority require reconciliation
Installed floor/room registration and whole-building modeling acceptance remain outstanding
Complete fine fabrication dimensions and all cropped/companion regions
Installed assignments and revision reconciliation
Remaining fine fractions, witness endpoints, material/finish exceptions and regional notes require targeted review.
Original/revision and companion authority remains unreconciled; no historical layer selected.
Installed instances, quantities, floor/room hosts and physical registration remain unestablished; no modeling or architectural release.
Selected crop contains grille plan and material-code legend, not property-line pipe profiles.
Pipe-rail/stanchion dimensions, room flagstaff detail, Main rail profiles and pole controls not re-inspected.
Exact shaft/member cross sections remain unresolved; post layout, anchorage/control assignments and step geometry require their own evidence.
Remaining notes, dimensions, endpoint classes and companion details outside the bounded crop require review.
Historical issue/revision authority, installed instances, quantities and physical registration remain unresolved; no geometry or architectural acceptance.
Remaining exact profile dimensions and post stations
Source-to-finish/step registration
Other sheet regions and revisions
No installed run/member separation accepted from these source-local controls
Stanchion/profile sizes, bolt dimensions, actual installation and pipe run registration remain open.
Remaining regional dimensions, notes, schedules, companion details and original/revision authority require review.
Installed instances, quantities, floor/room registration and continuous physical geometry remain unestablished; no architectural acceptance.
Remaining fine dimensions, notes, callouts, revisions and physical instance registration; no completeness or acceptance claim.

Download OCR observations (unverified)

Loading the selected drawing…

Scroll or pinch to inspect this drawing. The gold outline locates the selected reading. Archival drawing photograph · Oregon Historical Society research collections.

Open source image separately ↗

12 matching objects

An identified object is not a fully modeled object. Missing dimensions, locations and relationships remain explicit.

exterior-stair · main-north-entrance-stepsModeling: analytical-preview

Main Street north entrance steps

Research representation: boundary trace. Architectural checks: pending.

First floor

Source relationships · not a verified physical connection

centered on (printed, verified): Main Street central entrance/sidewalk field
bounded by (observed, verified): Parapet at Main Street entrance
registered plan context from (derived, unreviewed): FIRST FLOOR PLAN enclosed boundary
centered on (traced, unreviewed): Main exterior center door group

32 recorded properties

Still to extract or check

Run
Rise
Riser count
Tread count
Tread going
Overall width
Landing geometry
Handrails
Plan registration
Printed riser count
Printed riser height
Lower landing depth
Nosing/profile and exact stone tread build-up
Exact east/west assignment of the half plan
North-south world insertion from property line or building face
As-built correspondence
Step-detail sheet number from IMG_1244
Nosing profile and projection
Riser profile/height from a fabrication detail
Tread thickness/profile
Stone material/specification
Physical stepped surface
Printed riser count and height
Tread/riser/nosing construction profile
Flared plan boundary and parapet construction
Rail physical geometry
Threshold detail resolving 93.24 versus 93.25

Inspect this object’s readings →

View source IMG_1245 ↗

handrail-assembly · main-north-entrance-bronze-railModeling: analytical-preview

Main entrance bronze stair rail

Research representation: none. Architectural checks: pending.

First floor · Original mark: BRONZE RAIL

Source relationships · not a verified physical connection

follows and returns at (printed, unreviewed): Main Street north entrance steps
location controlled by (printed, verified): Sheet 201 location/arrangement reference — image unresolved
follows (observed, verified): Main Street north entrance steps
fabrication detail on (printed, verified): W-213 source-scope identity

29 recorded properties

Still to extract or check

Rail height
Member section
Post spacing and count
Anchorage
Fabrication detail from Sheet 213
As-built correspondence
Overall rail length and stair slope
Rail cross-section dimensions
Exact rail-to-rail separation
Post count and spacing
World placement
Exact overall rail length and slope
Exact lower and upper rail extension lengths
Post count and post spacing
Which mirrored half is east or west
Absolute world X and Z placement

Inspect this object’s readings →

View source IMG_1244 ↗

handrail-type · main-north-entrance-bronze-rail-model-10Modeling: not-modeled

W-213 Model No. 10 Main entrance handrail

Research representation: none. Architectural checks: pending.

Floor assignment pending · Original mark: MODEL NO. 10

Source relationships · not a verified physical connection

applies to (printed, verified): Main Street north entrance steps

2 recorded properties

Still to extract or check

Model/sample survival
Fabricator
Exact ornament profiles beyond the drawing
As-built correspondence

Inspect this object’s readings →

View source IMG_1087 ↗

handrail-post-type · main-north-entrance-bronze-rail-baluster-postModeling: not-modeled

Main entrance cast-bronze baluster/post

Research representation: none. Architectural checks: pending.

First floor · Original mark: CAST BRONZE / HOLLOW SHAFT

Source relationships · not a verified physical connection

through bolted to (printed, verified): Main entrance bronze rail stone anchorage
conforms to (printed, verified): Main entrance bronze rail stone anchorage

14 recorded properties

Still to extract or check

Exact hollow-shaft wall thickness
Full base-flange outline dimensions
Post spacing and count
As-built correspondence

Inspect this object’s readings →

View source IMG_1087 ↗

metal-to-stone-anchorage · main-north-entrance-bronze-rail-anchorageModeling: not-modeled

Main entrance bronze rail stone anchorage

Research representation: none. Architectural checks: pending.

First floor

8 recorded properties

Still to extract or check

Washer plan shape
Nut specification
Grout/lead packing
Edge-distance applicability of the separate 1'-1" control
Stone type and exact tread/parapet identity
As-built correspondence

Inspect this object’s readings →

View source IMG_1087 ↗

source-sheet · sheet-W213Modeling: not-modeled

W-213 source-scope identity

Research representation: none. Architectural checks: pending.

Floor assignment pending · Original mark: W-213

Source relationships · not a verified physical connection

does not establish (observed, verified): Main Street north entrance steps

0 recorded properties

Still to extract or check

Flagpole/eagle details
District Court grille details
Exterior door/window grille details
Property-line pipe-rail/balustrade details
All model-numbered ornaments outside the Main entrance handrail

Inspect this object’s readings →

View source IMG_1087 ↗

source-reference · sheet-201-unresolved-imageModeling: not-modeled

Sheet 201 location/arrangement reference — image unresolved

Research representation: none. Architectural checks: pending.

First floor · Original mark: 201

0 recorded properties

Still to extract or check

Source image identity
Complete Sheet 201 extraction
Main entrance rail location and arrangement
World registration

Inspect this object’s readings →

View source IMG_1087 ↗

handrail-run-axis · main-north-entrance-bronze-rail-run-negative-xModeling: analytical-preview

Main entrance bronze rail run · negative-X side

Research representation: boundary trace. Architectural checks: pending.

First floor · Original mark: BRONZE RAIL

Source relationships · not a verified physical connection

part of (derived, unreviewed): Main entrance bronze stair rail
follows (derived, unreviewed): Main Street north entrance steps

7 recorded properties

Still to extract or check

Physical member sections
Lower and upper extensions
Post count and spacing
Ornamental termini
Anchorage
As-built correspondence

Inspect this object’s readings →

View source IMG_1202 ↗

handrail-run-axis · main-north-entrance-bronze-rail-run-positive-xModeling: analytical-preview

Main entrance bronze rail run · positive-X side

Research representation: boundary trace. Architectural checks: pending.

First floor · Original mark: BRONZE RAIL

Source relationships · not a verified physical connection

part of (derived, unreviewed): Main entrance bronze stair rail
follows (derived, unreviewed): Main Street north entrance steps

7 recorded properties

Still to extract or check

Physical member sections
Lower and upper extensions
Post count and spacing
Ornamental termini
Anchorage
As-built correspondence

Inspect this object’s readings →

View source IMG_1202 ↗

assembly · detail-img1087-handrailModeling: not-modeled

Exterior door/window grilles and property-line stanchion close photograph

Research representation: none. Architectural checks: pending.

Floor assignment pending

6 recorded properties

Still to extract or check

Fine dimension fractions, witness endpoints and remaining small material callouts require targeted high-resolution review
Companion sheets, duplicate photographs and revision authority require reconciliation
Installed floor/room registration and whole-building modeling acceptance remain outstanding

Inspect this object’s readings →

View source IMG_1087 ↗

assembly · metal1012h-img1087-grille-specimenModeling: not-modeled

Main-floor exterior door/window grille casting detail

Research representation: none. Architectural checks: pending.

Floor assignment pending · Original mark: MODEL NO.12

5 recorded properties

Still to extract or check

All extruded and casting section dimensions
Rosette/ornament alloy and attachments
Door versus window instance mapping, quantity and revision reconciliation

Inspect this object’s readings →

View source IMG_1087 ↗

assembly · metalenv1014t-img1087-pipe-stanchionModeling: not-modeled

Property-line pipe-rail stanchion detail

Research representation: none. Architectural checks: pending.

Floor assignment pending

2 recorded properties

Still to extract or check

Stanchion/profile sizes, bolt dimensions, actual installation and pipe run registration remain open.
Remaining regional dimensions, notes, schedules, companion details and original/revision authority require review.
Installed instances, quantities, floor/room registration and continuous physical geometry remain unestablished; no architectural acceptance.

Inspect this object’s readings →

View source IMG_1087 ↗

View all source photographs →