← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs: 464
Identified objects: 4872
Verified printed values: 12046
Disputed values: 20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

IMG_1327 · Folder 186

Sec, Thru Judges Platform At 7" Floor

Original sheet identity has not yet been reconciled.

Extraction: Reviewed · extraction partial. IMG_1327 bounded typical roof slab section: candidate dimensions remain unreviewed; no field placement. Main roof physical field gate; one IMG_1327 detail inspected after text audit, no accepted solid. Partial timed visual review: Selected new access-derivative regions inspected; previously verified evidence reused. Partial extraction only. Partial timed visual review: Sequential access derivative inspection for detail assignment and hooked-end note; no numeric fraction resolved. Partial timed visual review: Prior evidence reused; only selected remaining source-local regions reviewed. No historical placement or accepted physical geometry. Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: Source-local schedule, fabrication or connection evidence only; no installed geometry or architectural acceptance. Partial timed visual review: undefined

Highlighted reading: REINFORCE AROUND ALL OPENINGS TO MAINTAIN FULL STRENGTH.. Opening bars, amounts and location need detailing.

Show every recorded property on this drawing →

Unresolved extraction work

specific W11 field applicability
roof covering layers
perimeter and cuts
world placement
slab top and underside elevations
individual member elevation transcription
complete datum relationship to W11 spots
world plan registration
sheet number
confirmed slab thickness witness
material specification
field applicability
complete build-up
world footprint
top and underside elevations
complete mesh specification
gauge
spacing
cover
lap and anchorage
installed extent
beam mark and size
confirmed side and bottom encasement witnesses
encasement material specification
continuity
mesh specification
anchorage
Close W11 roof registration with well-spread independent dimension or structural controls and held-out checks.
Classify and close one physical slab perimeter plus court boundary and all skylight, headhouse, fan-room, drain and access cuts or curbs that intersect it.
Transcribe and correlate a roof-field-specific section for structural slab, topping, roofing and underside elevations, with distinct local surface slope/elevation facets.
Correlate roof edge to an exterior wall/parapet section with both classified faces, thickness, projection and top/bottom elevations.
Remaining member, reinforcement and connection dimensions require fine-region review
Revision marks and historical instance placements remain unreconciled
Companion-sheet registration and modeling checks remain outstanding
Complete fine-fraction/member schedule transcription
Historical instance mapping and endpoint registration
Annotated revisions and companion notes reconciliation
Accepted connections and modeling checks
Complete member/plate/bar fraction transcription
Historical instance and source-to-plan registration
Revision authority and companion applicability
Connection and modeling acceptance checks
Rod/spacer diameter units and grades are not explicitly resolved by this notation; no diameter in inches assigned.
Installed slab fields, openings, support geometry and companion applicability remain unresolved.
Other sheet regions, fine notes, schedules, callouts and revisions remain unreviewed.
Complete source-to-instance registration, connection capacities, material grades and independent model/as-built checks remain pending.
ALL STEEL IN VAULTS TO BE½φ is a literal fraction/diameter designation; no independently printed physical diameter unit established.
Hooked-one-end/stagger-ends clause crosswalks to existing verified same-image reading; slab and roof fields still require mapping.
Complete source-to-instance registration, physical endpoints, installed quantities and revision authority remain unresolved.
Unreviewed regions, companion sheets, schedules and fine fractions remain open; this package is not exhaustive coverage.
Material grades, connection capacities, world transforms and independent model/as-built checks remain unestablished.
Complete source-to-plan registration and installed-instance applicability remain unresolved.
Unreviewed sheet regions, notes, callouts, schedules and revision authority remain open.
Material grades, full profiles, connection capacities and independent modeling checks unresolved.
Typical roof detail center 3″ vertical slab witness verified; assignment to any actual roof field remains unresolved.
Mesh middle designation remains unclear. Neither 2″ encasement candidate confirmed: exact reference faces/endpoints not sufficiently resolved.
Vault diameter unit convention, other slab details and complete roof assembly remain open.
Full source-to-instance assignment, physical endpoints, installed quantities and governing revision remain unresolved.
Unreviewed regions, notes, fine fractions and companion sheets remain open; this package is not exhaustive coverage.
No world geometry, material grade, structural capacity or model acceptance established.

Download OCR observations (unverified)

Loading the selected drawing…

Scroll or pinch to inspect this drawing. The gold outline locates the selected reading. Archival drawing photograph · Oregon Historical Society research collections.

Open source image separately ↗

13 matching objects

An identified object is not a fully modeled object. Missing dimensions, locations and relationships remain explicit.

roof-surface · roof-field-mainModeling: not-modeled

Main composition-roof field

Research representation: none. Architectural checks: pending.

Roof

5 recorded properties

Still to extract or check

Global registration
World position
Exact horizontal dimensions
Regional roof slope/level assignment
Construction/assembly detail

Inspect this object’s readings →

View source IMG_1227 ↗

assembly · roof-img1327-typical-slab-detail-01Modeling: not-modeled

Typical roof slab source detail

Research representation: none. Architectural checks: pending.

Roof

5 recorded properties

Still to extract or check

sheet number
confirmed slab thickness witness
material specification
field applicability
complete build-up
world footprint
top and underside elevations

Inspect this object’s readings →

View source IMG_1327 ↗

reinforcement · roof-img1327-slab-mesh-01Modeling: not-modeled

Slab mesh shown in typical roof detail

Research representation: none. Architectural checks: pending.

Roof

1 recorded properties

Still to extract or check

complete mesh specification
gauge
spacing
cover
lap and anchorage
installed extent

Inspect this object’s readings →

View source IMG_1327 ↗

assembly · roof-img1327-beam-encasement-detail-01Modeling: not-modeled

Beam encasement section in typical roof slab detail

Research representation: none. Architectural checks: pending.

Roof

3 recorded properties

Still to extract or check

beam mark and size
confirmed side and bottom encasement witnesses
encasement material specification
continuity
world placement

Inspect this object’s readings →

View source IMG_1327 ↗

reinforcement · roof-img1327-beam-mesh-01Modeling: not-modeled

Mesh leader at beam encasement

Research representation: none. Architectural checks: pending.

Roof

1 recorded properties

Still to extract or check

mesh specification
cover
anchorage
installed extent

Inspect this object’s readings →

View source IMG_1327 ↗

assembly · detail-20261011o-img1327-vault-roofModeling: not-modeled

Typical vault roof reinforcement

Research representation: none. Architectural checks: pending.

Floor assignment pending

5 recorded properties

Still to extract or check

Vault instance, room and floor assignment
Steel diameter glyph, material grade, bar lengths and anchorage
Slab/wall thickness, clear cover and actual spacing endpoint registration

Inspect this object’s readings →

View source IMG_1327 ↗

assembly · detail-20261011o-img1327-vault-wallModeling: not-modeled

Typical vault wall reinforcement

Research representation: none. Architectural checks: pending.

Floor assignment pending

7 recorded properties

Still to extract or check

Vault instance, room and floor assignment
Steel diameter glyph, material grade, bar lengths and anchorage
Slab/wall thickness, clear cover and actual spacing endpoint registration

Inspect this object’s readings →

View source IMG_1327 ↗

assembly · structure-20261011b-lightcourt-raised-wall-detailModeling: not-modeled

Raised seventh-floor light-court wall slab reinforcement detail

Research representation: none. Architectural checks: pending.

Seventh floor

1 recorded properties

Still to extract or check

Complete fine-fraction/member schedule transcription
Historical instance mapping and endpoint registration
Annotated revisions and companion notes reconciliation
Accepted connections and modeling checks

Inspect this object’s readings →

View source IMG_1327 ↗

assembly · structure-20261012b-penthouse-slab-ruleModeling: not-modeled

Penthouse floors, sheave service landings and fan-room floor slab specification

Research representation: none. Architectural checks: pending.

Floor assignment pending

15 recorded properties

Still to extract or check

Complete member/plate/bar fraction transcription
Historical instance and source-to-plan registration
Revision authority and companion applicability
Connection and modeling acceptance checks

Inspect this object’s readings →

View source IMG_1327 ↗

assembly · structure-20261012b-main-entrance-slabModeling: not-modeled

Detail of slab over Main entrance

Research representation: none. Architectural checks: pending.

Floor assignment pending

6 recorded properties

Still to extract or check

Complete member/plate/bar fraction transcription
Historical instance and source-to-plan registration
Revision authority and companion applicability
Connection and modeling acceptance checks

Inspect this object’s readings →

View source IMG_1327 ↗

material-specification · framingwitness1014g-img1327-vault-steel-ruleModeling: not-modeled

Typical vault steel literal rule

Research representation: none. Architectural checks: pending.

Floor assignment pending

1 recorded properties

Still to extract or check

No physical diameter unit established by½φ.
ALL STEEL IN VAULTS TO BE½φ is a literal fraction/diameter designation; no independently printed physical diameter unit established.
Hooked-one-end/stagger-ends clause crosswalks to existing verified same-image reading; slab and roof fields still require mapping.
Complete source-to-instance registration, physical endpoints, installed quantities and revision authority remain unresolved.
Unreviewed regions, companion sheets, schedules and fine fractions remain open; this package is not exhaustive coverage.
Material grades, connection capacities, world transforms and independent model/as-built checks remain unestablished.

Inspect this object’s readings →

View source IMG_1327 ↗

detail-type · structsched1013g-img1327-beam-fireproofingModeling: not-modeled

Typical beam fireproofing detail

Research representation: none. Architectural checks: pending.

Floor assignment pending

5 recorded properties

Still to extract or check

Complete source-to-plan registration and installed-instance applicability remain unresolved.
Unreviewed sheet regions, notes, callouts, schedules and revision authority remain open.
Material grades, full profiles, connection capacities and independent modeling checks unresolved.

Inspect this object’s readings →

View source IMG_1327 ↗

detail-type · structsched1013g-img1327-column-fireproofingModeling: not-modeled

Typical column fireproofing mesh

Research representation: none. Architectural checks: pending.

Floor assignment pending

1 recorded properties

Still to extract or check

Complete source-to-plan registration and installed-instance applicability remain unresolved.
Unreviewed sheet regions, notes, callouts, schedules and revision authority remain open.
Material grades, full profiles, connection capacities and independent modeling checks unresolved.

Inspect this object’s readings →

View source IMG_1327 ↗

View all source photographs →