← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs: 464
Identified objects: 4872
Verified printed values: 12046
Disputed values: 20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

1 matching properties

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

f1-door-elevator-2verified · derived

Rejected W3 threshold-trace center residual from registered W217 entrance center

6.95707575710492 ft · rejected

6.957076 ft

The residual exceeds W3's 2-foot trace allowance; the old trace is not averaged or reused.

IMG_1095 · sheet-W217 · Locate on drawing ↗

Drawing notation: PLAN OF BAY P; ELEVATOR No. 2

Full-sheet text and existing reports were read first; the complete sheet and sequential Bay P plan crops were then inspected one image at a time.

IMG_1202 · sheet-W3 · Locate on drawing ↗

Drawing notation: Earlier provisional threshold trace

The W3 registration is provisional. Bay P wall endpoints and the double-door segment are traced plan controls with a conservative 2-foot uncertainty, not surveyed construction faces.

Calculated from: W217-bay-p-W3-elevator-entrance-world-center-x, W217-bay-p-W3-elevator-entrance-world-center-z, W217-bay-p-W3-elevator-entrance-rejected-trace-center-x, W217-bay-p-W3-elevator-entrance-rejected-trace-center-z

Source-by-source coverage

Source inventory is separate from the floor filters above. Select one drawing to inspect it; no drawing set is preloaded.