An identified object is not a fully modeled object. Missing dimensions, locations and relationships remain explicit.
shaft · f1-elevator-2Modeling: not-modeled
ELEVATOR No. 2
Research representation: boundary trace. Architectural checks: pending.
First floor · Basement · Second floor · Third floor · Fourth floor · Fifth floor · Sixth floor · Seventh floor · Original mark: 2
Broadway/Main side; adjacent Stair C. qualitative visual relationship only; no coordinate trace
Source relationships · not a verified physical connection
20 recorded properties
Still to extract or check- Circled numeric marks elsewhere in this plan are not assigned as room numbers. This record identifies an instance, not a completed room enclosure.
- Registered position and relationships
- Printed clear width
- Printed clear depth
- Door size
- Sill/head elevations
- Pit and overhead
- Accepted world shaft polygon and wall faces
- Masonry wall thicknesses and finish offsets
- Car platform/cab dimensions and rail locations
- Pit depth and overhead
- Accepted door jamb stations and rough opening
Inspect this object’s readings →View source IMG_1202 ↗
opening · f1-door-elevator-1Modeling: not-modeled
Elevator No. 1 threshold
Research representation: none. Architectural checks: pending.
First floor
Elevator No. 1 page-top side; observed connections: f1-room-sixth-vestibule ↔ f1-elevator-1. Exact host wall remains unresolved.
Source relationships · not a verified physical connection
64 recorded properties · Room assignment not established
Still to extract or check- Exact wall instance and jamb station
- Sill/head elevation
- Opening type/hardware
- Clear opening versus door-panel dimension
- Rough opening
- Head/sill section
- Exact jamb stations
- Operating clear width and height after door travel
- Rough opening width and height
- Sill, threshold and head sections/build-up
- Individual leaf widths, thicknesses, overlap and travel
- Outer ornamental-surround dimensions
- Wall-face assignment and wall thickness
- Registered world position and orientation
- Accepted physical host-wall face and thickness
- Exact entrance depth relative to the W229 clear-hatch edge
- Rough opening and operating clear width/height
- Jamb, reveal, frame, sill, threshold and door-leaf construction
- Complete shaft, cab, guide, pit, overhead and machinery transforms
- Independent as-built check
Inspect this object’s readings →View source IMG_1202 ↗
opening · f1-door-elevator-2Modeling: not-modeled
Elevator No. 2 threshold
Research representation: none. Architectural checks: pending.
First floor
Elevator No. 2 page-top side; observed connections: f1-room-broadway-foyer ↔ f1-elevator-2. Exact host wall remains unresolved.
Source relationships · not a verified physical connection
52 recorded properties · Room assignment not established
Still to extract or check- Exact wall instance and jamb station
- Sill/head elevation
- Opening type/hardware
- Clear opening versus door-panel dimension
- Rough opening
- Head/sill section
- Exact jamb stations
- Operating clear width and height after door travel
- Rough opening width and height
- Sill, threshold and head sections/build-up
- Individual leaf widths, thicknesses, overlap and travel
- Outer ornamental-surround dimensions
- Wall-face assignment and wall thickness
- Registered world position and orientation
Inspect this object’s readings →View source IMG_1202 ↗
shaft-opening · f1-elevator-2-clear-hatchModeling: not-modeled
Elevator No. 2 clear hatch
Research representation: none. Architectural checks: pending.
First floor
10 recorded properties
Still to extract or check- Exact relation of the 7'-5 3/4" witness to hatch, cab and finished enclosure faces
- South clear-hatch edge world Z
- North clear-hatch edge world Z
- Floor-opening construction and thickness
- Pit and overhead continuation
- Complete physical hatch transform
Inspect this object’s readings →View source IMG_1267 ↗
registration-gate · elevator-w229-w231-to-w3-registration-gateModeling: not-modeled
W229/W230/W231 elevator detail controls to W3 trace registration gate
Research representation: none. Architectural checks: pending.
First floor
Source relationships · not a verified physical connection
11 recorded properties
Still to extract or check- For W229, the west outside enclosure face is fixed at world X = -65.020833 ft and the south/north clear-hatch edges are fixed at world Z = 46/56 ft; both clear-hatch world-X edges remain unresolved. For W230, the east outside enclosure face is fixed at X = 65.020833 ft and the clear-hatch east/west edges at X = 66.083333/73.083333 ft; both clear-hatch world-Z edges remain unresolved. Both elevators still lack finite enclosure-face endpoints, opposite faces, wall thickness and complete hatch-to-wall construction.
- For W231, an exact non-collinear column/grid frame and a complete, classified shaft or clear-hatch width/depth chain.
- Rough-face versus finish-face classification and wall thickness for each enclosure side.
- Independently accepted matching W3 hatch or shaft faces and a reported hold-out corner residual.
- Pit depth, overhead, slab opening and cross-floor continuation evidence for each elevator independently.
- World wall plane and jamb-center/inside-jamb offsets for all three entrances.
- Operating clear width and height, rough opening, leaf overlap/travel, sill, head and wall-thickness build-up.
- Elevator 3 first-floor entrance dimensions and endpoint classes.
- An independent check tying each local door centerline to the corresponding W3 landing wall.
- Cab-to-hatch origin, platform size and inside-clear dimensions.
- Guide-rail, counterweight and bracket centerlines tied to classified hatch faces.
- Confirmed assignment of W219 Cab E elevations to Elevator 1, 2 or 3.
- Door operator, travel/pocket and emergency-exit geometry.
- Dimensioned horizontal extents and wall-face endpoints for the Elevator 1 vestibule and Elevator 2 Broadway foyer thresholds.
- Elevator 3 ramp length, slope, threshold build-up and exact landing boundary at EL. 93.25 and EL. 95.33.
- Registered sill/head coordinates and independent correspondence to W3 landing traces.
- As-built confirmation before accepting vertical shaft or landing continuity.
Inspect this object’s readings →View source IMG_1202 ↗
architectural-face-control · f1-elevator-2-w230-east-enclosure-face-controlModeling: not-modeled
Elevator 2 · W230 east outside enclosure face control
Research representation: none. Architectural checks: pending.
First floor · Original mark: 2'-0 1/4"
Source relationships · not a verified physical connection
7 recorded properties
Still to extract or check- North endpoint world Z
- South endpoint world Z
- Wall thickness and opposite face
- Vertical extent
- Complete physical shaft transform
Inspect this object’s readings →View source IMG_1267 ↗