← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs: 464
Identified objects: 4872
Verified printed values: 12046
Disputed values: 20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

2 matching properties

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

foundation-main-5-padverified · observed

footing.cgOffsetWorldZSign

℄ FOOTING; ℄ STEEL COLS; separate labeled centerlines continuing through C5; 5; 5′0″ + 5′0″; (-7′6″); footing and steel-column centerlines

-1 ratio

Nominal footing envelope only; source audit state: checked-master-crop-single-reader. The actual C5/Madison line pair places the footing centerline above the steel-column line; the upright plan's north is down, hence outward/south/−Z. No detached typical-diagram orientation was transferred.

IMG_1328 · Locate on drawing ↗

Drawing notation: ℄ FOOTING; ℄ STEEL COLS; separate labeled centerlines continuing through C5

IMG_1328 · Locate on drawing ↗

Drawing notation: 5; 5′0″ + 5′0″; (-7′6″); footing and steel-column centerlines

foundation-main-5-padverified · derived

footing.cgOffsetWorldZ

℄ FOOTING; ℄ STEEL COLS; separate labeled centerlines continuing through C5; 5; 5′0″ + 5′0″; (-7′6″); footing and steel-column centerlines; C5; C6; C7; c; c = 2¾″; OF FOOTINGS FROM ℄ OF MAIN COLUMN ARE GIVEN BY DIMENSION E AND SUFFIX AT TOP OF SCHEDULE.

-2.75 in

Nominal footing envelope only; source audit state: checked-arithmetic-from-source-linked-parents.

IMG_1328 · Locate on drawing ↗

Drawing notation: ℄ FOOTING; ℄ STEEL COLS; separate labeled centerlines continuing through C5

IMG_1328 · Locate on drawing ↗

Drawing notation: 5; 5′0″ + 5′0″; (-7′6″); footing and steel-column centerlines

IMG_1323 · sheet-W409 · Locate on drawing ↗

Drawing notation: C5; C6; C7; c

IMG_1323 · sheet-W409 · Locate on drawing ↗

Drawing notation: c = 2¾″; OF FOOTINGS FROM ℄ OF MAIN COLUMN ARE GIVEN BY DIMENSION E AND SUFFIX AT TOP OF SCHEDULE.

Calculated from: footing-5-placement-offset-z-sign, footing-5-placement-eccentricity-magnitude

Source-by-source coverage

Source inventory is separate from the floor filters above. Select one drawing to inspect it; no drawing set is preloaded.