← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs: 464
Identified objects: 4872
Verified printed values: 12046
Disputed values: 20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

1 matching properties

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

f1-door-elevator-1verified · derived

Elevator No. 1 analytical finished-entrance center · world south/north coordinate

Z = 47.344 ft

47.344 ft

Accepted only for the zero-thickness evidence-review envelope and retains W3's 2-foot trace uncertainty.

IMG_1126 · sheet-W229 · Locate on drawing ↗

Drawing notation: 1ST FLOOR PLAN; ELEVATOR No. 1; 7'-0" CLEAR HATCH; 10'-0" CLEAR HATCH

Targeted review confirms that the first-floor landing entrance is on the page-top/south enclosure face and runs in the W229 local-u direction, which the accepted symbolic column frame maps to building +X west/Broadway. The crop does not establish wall thickness or a physical face offset.

IMG_1202 · sheet-W3 · Locate on drawing ↗

Drawing notation: ELEVATOR NO. 1; VESTIBULE; parallel threshold/door lines facing vestibule

The prior W3 trace is retained as a provisional entrance-center witness with 2-foot uncertainty. Its traced 4.602-foot length is not used as the finished or operating width.

Calculated from: f1-door-elevator-1-jamb-1-north, f1-door-elevator-1-jamb-2-north

Source-by-source coverage

Source inventory is separate from the floor filters above. Select one drawing to inspect it; no drawing set is preloaded.