An identified object is not a fully modeled object. Missing dimensions, locations and relationships remain explicit.
column · column-68Modeling: not-modeled
Support 68
Research representation: control marker. Architectural checks: pending.
Basement · Third floor · First floor · Original mark: 68
Source relationships · not a verified physical connection
19 recorded properties
Still to extract or check- Confirmed individual support symbol center
- Local sheet deformation and as-built position
- Steel-to-footing and cap-center offset
- Storey continuation and actual bearing association
- storey-by-storey member presence
- exact section notation and leg/plate thicknesses
- member segment endpoints
- splice-plate, batten, channel and cover-plate dimensions where applicable
- absolute foot/top-of-base-plate elevation
- fabrication quantity and connections
- Verified third-floor absolute plan station
- Continuous dimension or centerline tie to printed perimeter controls
- Individual storey continuation check
- Exact tie from framing line to column control center
- Any beam-to-column transverse eccentricity
- Third-floor column center accepted X/Z
- Relationship to W224 inner wall-face reference
Inspect this object’s readings →View source IMG_1328 ↗
column · column-82Modeling: not-modeled
Support 82
Research representation: control marker. Architectural checks: pending.
Basement · Third floor · First floor · Original mark: 82
Source relationships · not a verified physical connection
23 recorded properties
Still to extract or check- Confirmed individual support symbol center
- Local sheet deformation and as-built position
- Steel-to-footing and cap-center offset
- Storey continuation and actual bearing association
- storey-by-storey member presence
- exact section notation and leg/plate thicknesses
- member segment endpoints
- splice-plate, batten, channel and cover-plate dimensions where applicable
- absolute foot/top-of-base-plate elevation
- fabrication quantity and connections
- Verified third-floor absolute plan station
- Continuous dimension or centerline tie to printed perimeter controls
- Individual storey continuation check
- Exact tie from framing line to column control center
- Any beam-to-column transverse eccentricity
- Third-floor column center accepted X/Z
- Relationship to W224 inner wall-face reference
Inspect this object’s readings →View source IMG_1328 ↗
assembly · control-w402-interior-68-82Modeling: not-modeled
W402 local perimeter chain and framing incidence audit
Research representation: none. Architectural checks: pending.
Third floor
7 recorded properties
Still to extract or check- Interior axis incidence not secured by an independent dimensioned zero-offset tie
Inspect this object’s readings →View source IMG_1316 ↗
structural-assembly · detail-img1316-light-court-wall-sectionModeling: not-modeled
Light-court wall-beam section family
Research representation: none. Architectural checks: pending.
Third floor
8 recorded properties
Still to extract or check- The source-local 7-inch lower horizontal, 1-foot2-inch upper horizontal and 5-inch floor offset witnesses do not establish the complete wall layer/material chain. detail-20261011n-img1316-wall_layer_dimensions remains open.
- Complete source-to-instance registration, physical endpoints and installed quantities remain unresolved.
- Unreviewed sheet regions, fine notes, schedules, companion applicability and revision authority remain open.
- No world coordinates, member cut lengths, steel grades, physical wall geometry or architectural acceptance established.
Inspect this object’s readings →View source IMG_1316 ↗
structural-assembly · detail-img1316-outside-wall-typicalModeling: not-modeled
Typical outside-wall beam section
Research representation: none. Architectural checks: pending.
Third floor
3 recorded properties
Still to extract or check- Remaining dimension endpoints and layer/material assignments not yet reviewed
- Installed instances, quantities and plan/elevation registration unresolved
- Companion details and revisions require reconciliation
- Independent model/as-built checks unavailable in this extraction
Inspect this object’s readings →View source IMG_1316 ↗
structural-assembly · detail-img1316-outside-wall-22ft7Modeling: not-modeled
Outside-wall section for 22′7″ spans
Research representation: none. Architectural checks: pending.
Third floor
4 recorded properties
Still to extract or check- Remaining dimension endpoints and layer/material assignments not yet reviewed
- Installed instances, quantities and plan/elevation registration unresolved
- Companion details and revisions require reconciliation
- Independent model/as-built checks unavailable in this extraction
Inspect this object’s readings →View source IMG_1316 ↗
structural-assembly · detail-img1316-outside-wall-15ft7Modeling: not-modeled
Outside-wall section for 15′7″ spans
Research representation: none. Architectural checks: pending.
Third floor
4 recorded properties
Still to extract or check- Remaining dimension endpoints and layer/material assignments not yet reviewed
- Installed instances, quantities and plan/elevation registration unresolved
- Companion details and revisions require reconciliation
- Independent model/as-built checks unavailable in this extraction
Inspect this object’s readings →View source IMG_1316 ↗
structural-note-assembly · structnote-img1316-floor-note-assemblyModeling: not-modeled
Floor fill, slab and continuous angle requirements
Research representation: none. Architectural checks: pending.
Third floor
8 recorded properties
Still to extract or check- Installed angle quantities and individual bay lengths not extracted
- Material specification and fastening not established by these notes
- Remaining framing marks, schedules, revisions and companion slab sheet W-413 require review
- Source-to-model and as-built checks remain pending
Inspect this object’s readings →View source IMG_1316 ↗