Gus J. SolomonUnited States Courthouse
MenuClose
← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs
464
Identified objects
4872
Verified printed values
12046
Disputed values
20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

Clear filters
IMG_1292 · Folder 187

Miscellaneous lighting fixtures—schedule and details

Original sheet identity has not yet been reconciled.

Extraction: Reviewed · extraction partial. Partial timed visual review: Partial sequential 1000px JPEG65 locator review after OCR/catalogue and existing reports. Actual clockwise reading rotation 0 degrees; normalized raw access-image regions before rotation. No complete extraction claimed. Partial timed visual review: Additive bounded follow-up after queue, OCR and prior packages; prior verified readings reused without duplication. No full-sheet completion or model acceptance. Partial timed visual review: Additive detailed review of selected regions following OCR and prior packages. Type-level evidence only; no installed position or quantity established. Other fine regions remain partial. Partial timed visual review: Bounded additive fine-note review of upright WebP, one sequential image inspection. Prior packages and OCR consulted first; no full coverage claim. Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: undefined

Unresolved extraction work
  • Partial 1000px locator review only: full fine-region dimensions, notes, callouts and companion details remain unreviewed
  • Physical instance quantities and spatial relationships not established
  • Original drawing and handwritten/archive annotations require separate reconciliation
  • Individual marked fixture instance/type objects and general notes not fully extracted
  • Full remaining regional note and dimension review
  • Companion installation schedule and original installed quantities
  • Source-to-installed-instance registration and as-built correspondence
  • remaining unreadable fractions and dimensional endpoints
  • complete companion installation schedule and original quantities
  • source-to-installed-instance registration
  • Remaining small fractions and profile dimensions
  • Companion installation schedule and installed quantities
  • Installed physical instances, original quantities, room/floor hosts, anchors and checked source-to-building registration unresolved.
  • Original/revision and as-built applicability require companion review; no layer selected.
  • Remaining profile dimensions, glass thickness, envelope/endpoints, notes, schedules, cutoffs and companion details remain partial; modeling unchecked.
  • Installed quantities, room/floor hosts, mounting stations, checked registration and as-built correspondence remain unresolved.
  • Revision authority, remaining fine notes, dimensions and companion schedules require review.
  • Glass thickness, physical endpoints and overall envelopes remain unestablished; no modeling/checking or architectural acceptance.
  • Native master attempts already failed arm-process/nipple/intermediate finish and second stud option; no higher-quality exposure found. Single3/8 stud clause does not establish a second option.
  • Full regional coverage and independent dimensional checks.
  • Installed schedule, original/as-built correspondence, floor/room hosts, stations and checked source transforms.
  • Historical issue/revision authority and whole-building modeling checks.
  • Installed source-to-element registration, actual quantities, floor/room hosts and as-built correspondence
  • Governing issue/revision authority and original versus archive annotation reconciliation
  • All residual fine profiles, dimensions, callouts, schedules, companion details and clipped margins remain partial
  • Arm-tubing manufacturing clause, socket-nipple/catch wording and residual finish/scouring grain clauses unresolved
  • Second new-building stud option earlier placeholder is not established by visible single3/8 clause; keep numeric null
  • Actual old/new fixture studs require field verification; PF designation is not installed conductor selection
  • Fine drawing dimensions/profile endpoints not exhaustively extracted; no physical thickness inferred from gauges.
  • Installed fixture key, room/station assignment, quantity, host/anchor and checked registration remain unresolved.
  • Original versus annotated revision authority and clipped sheet edges require review.
  • Most upper views were outside master crops; each401–418 canopy/socket/thread/link and A/X variant needs individual review.
  • No installation schedule key found.
  • Existing socket,holder,screw and cord gauge records reused.
  • 422X source at crop top clearly hangs linen cord6ft6in above floor; not newly accepted until complete variant note/endpoints checked.
  • Type row envelopes and top portions absent from focused notes crops.
  • Existing cast bowl/brass-or-steel,filament placement,cream finish reused.
  • Three-arm drawing marker seen but not extracted as installed quantity; small link triplet still requires targeted crop.
  • Recorded individual general requirements; arm-tubing process words,plating/color grain clauses and stud fractions remain explicit nulls.
  • No numeric sheet thickness inferred from20gauge; prescribed wire gauges not diameters.
  • A large specification-code suffix and two B-holder fractions remain undecided.
  • Glass wall thickness not printed in inspected note; full outlines/companion glass profiles still require review.
  • No original/revised alternatives detected in these printed note blocks; earlier wrong letters/material/rating treated as same-note transcription errors.
  • Use IMG1294 existing S14A/sizes/finish notes; no repeated measurements.
  • Outline/etching relief depths and globe-to-fixture installed correspondence unresolved.
  • Installed instances, quantities, room/floor hosts, mounting and accepted source-to-building registration remain unresolved.
  • Original/revision authority and companion specifications remain unresolved.
  • Unvisited regions, dimensions, schedules, margins and notes remain partial; modeling/checking unchecked.
  • Installed quantities, floor/room hosts, mounting stations and accepted source-to-building registration remain unresolved.
  • Governing issue/revision and installed/as-built correspondence require companion schedule evidence.
  • Remaining fine dimensions, profiles, notes and margins are partial; modeling/checking unchecked.
  • Arm-tubing and nipple clauses remain unlocated in repeated prior review; no reconstructed wording. Broad general-note question remains open; selected clauses do not close it.
  • Remaining intermediate finish wording, stud-option scope and original sheet suffix remain unverified.

Download OCR observations (unverified)

Loading the selected drawing…

Scroll or pinch to inspect this drawing. Archival drawing photograph · Oregon Historical Society research collections.

Open source image separately ↗

139 matching properties

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

detail-lighting-img1292-glassnotesverified · printed

type_g_minimum_depth

NOT LESS THAN 10" DEEP

10 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Minimum depth for16in reference globe; not total fixture drop.

IMG_1292 · Locate on drawing ↗

Drawing notation: NOT LESS THAN 10" DEEP

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Minimum depth for16in reference globe; not total fixture drop.

Calculated from: lightspec1013e-img1292-078-type_g_header_reading_resolution

detail-lighting-img1292-glassnotesverified · printed

type_g_other_size_proportion

OTHER SIZES SHALL HAVE DEPTH IN SAME PROPORTION (SEE LIST)

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. The referenced list still needs locating; no unprinted derived size generated.

IMG_1292 · Locate on drawing ↗

Drawing notation: OTHER SIZES SHALL HAVE DEPTH IN SAME PROPORTION (SEE LIST)

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. The referenced list still needs locating; no unprinted derived size generated.

Calculated from: lightspec1013e-img1292-078-type_g_header_reading_resolution

detail-lighting-img1292-glassnotesverified · printed

type_or_header_reading_resolution

REFLECTORS TYPE "OR"

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Same paragraph formerly transcribed D. Clear OR header; previous D assignment does not survive this reading. Lamp numbers50/75/100 remain numerically present but their type label is corrected.

IMG_1292 · Locate on drawing ↗

Drawing notation: REFLECTORS TYPE "OR"

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Same paragraph formerly transcribed D. Clear OR header; previous D assignment does not survive this reading. Lamp numbers50/75/100 remain numerically present but their type label is corrected.

Conflicting readings: detail-lighting-img1292-glassnotes-type_d_material detail-lighting-img1292-glassnotes-type_d_lamp_small_power detail-lighting-img1292-glassnotes-type_d_lamp_large_power

detail-lighting-img1292-glassnotesverified · printed

type_or_material_resolved

SHALL BE PRESSED WHITE OPAL GLASS REFLECTORS IN THE BOWL SHAPE WITH SIMPLE ELABORATIONS

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Same note reads pressed white-opal glass; former soda-silicate material is a transcription error, not a second original material.

IMG_1292 · Locate on drawing ↗

Drawing notation: SHALL BE PRESSED WHITE OPAL GLASS REFLECTORS IN THE BOWL SHAPE WITH SIMPLE ELABORATIONS

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Same note reads pressed white-opal glass; former soda-silicate material is a transcription error, not a second original material.

Calculated from: lightspec1013e-img1292-085-type_or_header_reading_resolution

Conflicting readings: detail-lighting-img1292-glassnotes-type_d_material

detail-lighting-img1292-glassnotesverified · printed

type_or_minimum_depth_75_100w

DEPTH NOT LESS THAN 7" FOR75 &100 WATT LAMPS

7 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

IMG_1292 · Locate on drawing ↗

Drawing notation: DEPTH NOT LESS THAN 7" FOR75 &100 WATT LAMPS

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

Calculated from: lightspec1013e-img1292-085-type_or_header_reading_resolution

detail-lighting-img1292-glassnotesverified · printed

type_or_75w_rating_option

75 &100 WATT LAMPS

75 W

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

IMG_1292 · Locate on drawing ↗

Drawing notation: 75 &100 WATT LAMPS

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

Calculated from: lightspec1013e-img1292-085-type_or_header_reading_resolution

detail-lighting-img1292-glassnotesverified · printed

type_or_100w_rating_option

75 &100 WATT LAMPS

100 W

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

IMG_1292 · Locate on drawing ↗

Drawing notation: 75 &100 WATT LAMPS

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

Calculated from: lightspec1013e-img1292-085-type_or_header_reading_resolution

detail-lighting-img1292-glassnotesverified · printed

type_or_minimum_depth_up_to_50w

NOT LESS THAN5" FOR50 WATT AND SMALLER LAMPS

5 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

IMG_1292 · Locate on drawing ↗

Drawing notation: NOT LESS THAN5" FOR50 WATT AND SMALLER LAMPS

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

Calculated from: lightspec1013e-img1292-085-type_or_header_reading_resolution

detail-lighting-img1292-glassnotesverified · printed

type_or_smaller_group_lamp_maximum

50 WATT AND SMALLER LAMPS

50 W

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Group upper lamp-rating bound; not a minimum and not total fixture power.

IMG_1292 · Locate on drawing ↗

Drawing notation: 50 WATT AND SMALLER LAMPS

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Group upper lamp-rating bound; not a minimum and not total fixture power.

Calculated from: lightspec1013e-img1292-085-type_or_header_reading_resolution

detail-lighting-img1292-glassnotesverified · printed

type_mr_header_reading_resolution

TYPE "MR"

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Same paragraph formerly transcribed M. Clear MR type header; retain prior records separately without overwriting.

IMG_1292 · Locate on drawing ↗

Drawing notation: TYPE "MR"

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Same paragraph formerly transcribed M. Clear MR type header; retain prior records separately without overwriting.

Conflicting readings: detail-lighting-img1292-glassnotes-type_m_material detail-lighting-img1292-glassnotes-type_m_lamp_limit

detail-lighting-img1292-glassnotesverified · printed

type_mr_material_resolved

PORCELAIN ENAMEL STEEL BOWL SHAPED REFLECTOR

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Steel/enamel material itself agrees with earlier reading; corrected type label MR.

IMG_1292 · Locate on drawing ↗

Drawing notation: PORCELAIN ENAMEL STEEL BOWL SHAPED REFLECTOR

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Steel/enamel material itself agrees with earlier reading; corrected type label MR.

Calculated from: lightspec1013e-img1292-092-type_mr_header_reading_resolution

Conflicting readings: detail-lighting-img1292-glassnotes-type_m_material

detail-lighting-img1292-glassnotesverified · printed

type_mr_minimum_depth

NOT LESS THAN5" DEEP

5 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

IMG_1292 · Locate on drawing ↗

Drawing notation: NOT LESS THAN5" DEEP

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

Calculated from: lightspec1013e-img1292-092-type_mr_header_reading_resolution

detail-lighting-img1292-glassnotesverified · printed

type_mr_holder_size

2 1/4" HOLDER

2.25 in

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

IMG_1292 · Locate on drawing ↗

Drawing notation: 2 1/4" HOLDER

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping.

Calculated from: lightspec1013e-img1292-092-type_mr_header_reading_resolution

detail-lighting-img1292-glassnotesverified · printed

type_mr_lamp_maximum_resolved

LAMPS50 WATTS OR LESS

50 W

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Same note unambiguously reads lamps50W or less. Earlier not-less-than75W reverses the limit and transcribes the wrong number; not an original/revised alternative.

IMG_1292 · Locate on drawing ↗

Drawing notation: LAMPS50 WATTS OR LESS

Printed glassware GENERAL NOTES on IMG1292. Dimension/rating requirements apply to a glassware or reflector type and its stated lamp options; no physical installed count or room mapping. Same note unambiguously reads lamps50W or less. Earlier not-less-than75W reverses the limit and transcribes the wrong number; not an original/revised alternative.

Calculated from: lightspec1013e-img1292-092-type_mr_header_reading_resolution

Conflicting readings: detail-lighting-img1292-glassnotes-type_m_lamp_limit

lightspec1013e-img1292-general-specificationunreviewed · printed

arm_tubing_process_remains_unestablished

[No independently legible arm-tubing process clause in the inspected GENERAL NOTES]

The candidate ALL TUBING USED FOR ARMS wording cannot be located securely in the inspected top general-note block. Exposed-parts brass and adjacent canopy/ring clauses do not establish arm manufacturing process.

IMG_1292 · Locate on drawing ↗

Drawing notation: [No independently legible arm-tubing process clause in the inspected GENERAL NOTES]

The candidate ALL TUBING USED FOR ARMS wording cannot be located securely in the inspected top general-note block. Exposed-parts brass and adjacent canopy/ring clauses do not establish arm manufacturing process.

Calculated from: lightspec1013e-img1292-024-arm_tubing_construction, lightfine1013n-img_1292-012-arm_tubing_process_still_unestablished

lightspec1013e-img1292-general-specificationunreviewed · printed

socket_nipple_material_remains_unestablished

ALL BRASS SHELL SOCKETS SHALL HAVE AMPLE MEANS FOR HOLDING CAP TO SHELL [nipple-material clause not established]

Same socket block reads cap-retention AMPLE MEANS. This is not a nipple material specification; retain original null question without claiming a material.

IMG_1292 · Locate on drawing ↗

Drawing notation: ALL BRASS SHELL SOCKETS SHALL HAVE AMPLE MEANS FOR HOLDING CAP TO SHELL [nipple-material clause not established]

Same socket block reads cap-retention AMPLE MEANS. This is not a nipple material specification; retain original null question without claiming a material.

Calculated from: lightspec1013e-img1292-035-socket_nipple_material

lightspec1013e-img1292-general-specificationverified · printed

finish_plating_clause_exact_wording

ALL FINISH SHALL BE PRODUCED BY ELECTRO PLATING UNLESS OTHERWISE NOTED

Same original general FINISH heading and immediately following clause. Printed exception preserved; no installed coating or broader intermediate-process closure asserted.

IMG_1292 · Locate on drawing ↗

Drawing notation: ALL FINISH SHALL BE PRODUCED BY ELECTRO PLATING UNLESS OTHERWISE NOTED

Same original general FINISH heading and immediately following clause. Printed exception preserved; no installed coating or broader intermediate-process closure asserted.

lightspec1013e-img1292-general-specificationillegible · printed

finish_intermediate_process_remains_partial

[Dark-color intermediate operation wording remains partly blurred]

Yellow-brass polishing and dark-color recess retention already have verified prior records. Exact intervening operation/grain wording remains insecure in this crop and is not reconstructed from expected fabrication practice.

IMG_1292 · Locate on drawing ↗

Drawing notation: [Dark-color intermediate operation wording remains partly blurred]

Yellow-brass polishing and dark-color recess retention already have verified prior records. Exact intervening operation/grain wording remains insecure in this crop and is not reconstructed from expected fabrication practice.

Calculated from: lightspec1013e-img1292-040-finish_substrate_process_remaining

detail-lighting-img1292-417verified · printed

417_keyless_socket_requirement

USE KEYLESS SOCKET FOR No 417

Exact original type417 left socket annotation. CHANDELIER LOOP is the neighboring right leader; no50–60W rating belongs to this clause. Historical tentative wording retained.

IMG_1292 · Locate on drawing ↗

Drawing notation: USE KEYLESS SOCKET FOR No 417

Exact original type417 left socket annotation. CHANDELIER LOOP is the neighboring right leader; no50–60W rating belongs to this clause. Historical tentative wording retained.

View all source photographs →