Gus J. SolomonUnited States Courthouse
MenuClose
← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs
464
Identified objects
4872
Verified printed values
12046
Disputed values
20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

Clear filters
IMG_1292 · Folder 187

Miscellaneous lighting fixtures—schedule and details

Original sheet identity has not yet been reconciled.

Extraction: Reviewed · extraction partial. Partial timed visual review: Partial sequential 1000px JPEG65 locator review after OCR/catalogue and existing reports. Actual clockwise reading rotation 0 degrees; normalized raw access-image regions before rotation. No complete extraction claimed. Partial timed visual review: Additive bounded follow-up after queue, OCR and prior packages; prior verified readings reused without duplication. No full-sheet completion or model acceptance. Partial timed visual review: Additive detailed review of selected regions following OCR and prior packages. Type-level evidence only; no installed position or quantity established. Other fine regions remain partial. Partial timed visual review: Bounded additive fine-note review of upright WebP, one sequential image inspection. Prior packages and OCR consulted first; no full coverage claim. Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: undefined

Unresolved extraction work
  • Partial 1000px locator review only: full fine-region dimensions, notes, callouts and companion details remain unreviewed
  • Physical instance quantities and spatial relationships not established
  • Original drawing and handwritten/archive annotations require separate reconciliation
  • Individual marked fixture instance/type objects and general notes not fully extracted
  • Full remaining regional note and dimension review
  • Companion installation schedule and original installed quantities
  • Source-to-installed-instance registration and as-built correspondence
  • remaining unreadable fractions and dimensional endpoints
  • complete companion installation schedule and original quantities
  • source-to-installed-instance registration
  • Remaining small fractions and profile dimensions
  • Companion installation schedule and installed quantities
  • Installed physical instances, original quantities, room/floor hosts, anchors and checked source-to-building registration unresolved.
  • Original/revision and as-built applicability require companion review; no layer selected.
  • Remaining profile dimensions, glass thickness, envelope/endpoints, notes, schedules, cutoffs and companion details remain partial; modeling unchecked.
  • Installed quantities, room/floor hosts, mounting stations, checked registration and as-built correspondence remain unresolved.
  • Revision authority, remaining fine notes, dimensions and companion schedules require review.
  • Glass thickness, physical endpoints and overall envelopes remain unestablished; no modeling/checking or architectural acceptance.
  • Native master attempts already failed arm-process/nipple/intermediate finish and second stud option; no higher-quality exposure found. Single3/8 stud clause does not establish a second option.
  • Full regional coverage and independent dimensional checks.
  • Installed schedule, original/as-built correspondence, floor/room hosts, stations and checked source transforms.
  • Historical issue/revision authority and whole-building modeling checks.
  • Installed source-to-element registration, actual quantities, floor/room hosts and as-built correspondence
  • Governing issue/revision authority and original versus archive annotation reconciliation
  • All residual fine profiles, dimensions, callouts, schedules, companion details and clipped margins remain partial
  • Arm-tubing manufacturing clause, socket-nipple/catch wording and residual finish/scouring grain clauses unresolved
  • Second new-building stud option earlier placeholder is not established by visible single3/8 clause; keep numeric null
  • Actual old/new fixture studs require field verification; PF designation is not installed conductor selection
  • Fine drawing dimensions/profile endpoints not exhaustively extracted; no physical thickness inferred from gauges.
  • Installed fixture key, room/station assignment, quantity, host/anchor and checked registration remain unresolved.
  • Original versus annotated revision authority and clipped sheet edges require review.
  • Most upper views were outside master crops; each401–418 canopy/socket/thread/link and A/X variant needs individual review.
  • No installation schedule key found.
  • Existing socket,holder,screw and cord gauge records reused.
  • 422X source at crop top clearly hangs linen cord6ft6in above floor; not newly accepted until complete variant note/endpoints checked.
  • Type row envelopes and top portions absent from focused notes crops.
  • Existing cast bowl/brass-or-steel,filament placement,cream finish reused.
  • Three-arm drawing marker seen but not extracted as installed quantity; small link triplet still requires targeted crop.
  • Recorded individual general requirements; arm-tubing process words,plating/color grain clauses and stud fractions remain explicit nulls.
  • No numeric sheet thickness inferred from20gauge; prescribed wire gauges not diameters.
  • A large specification-code suffix and two B-holder fractions remain undecided.
  • Glass wall thickness not printed in inspected note; full outlines/companion glass profiles still require review.
  • No original/revised alternatives detected in these printed note blocks; earlier wrong letters/material/rating treated as same-note transcription errors.
  • Use IMG1294 existing S14A/sizes/finish notes; no repeated measurements.
  • Outline/etching relief depths and globe-to-fixture installed correspondence unresolved.
  • Installed instances, quantities, room/floor hosts, mounting and accepted source-to-building registration remain unresolved.
  • Original/revision authority and companion specifications remain unresolved.
  • Unvisited regions, dimensions, schedules, margins and notes remain partial; modeling/checking unchecked.
  • Installed quantities, floor/room hosts, mounting stations and accepted source-to-building registration remain unresolved.
  • Governing issue/revision and installed/as-built correspondence require companion schedule evidence.
  • Remaining fine dimensions, profiles, notes and margins are partial; modeling/checking unchecked.
  • Arm-tubing and nipple clauses remain unlocated in repeated prior review; no reconstructed wording. Broad general-note question remains open; selected clauses do not close it.
  • Remaining intermediate finish wording, stud-option scope and original sheet suffix remain unverified.

Download OCR observations (unverified)

Loading the selected drawing…

Scroll or pinch to inspect this drawing. Archival drawing photograph · Oregon Historical Society research collections.

Open source image separately ↗

139 matching properties

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

detail-lighting-img1292-417verified · printed

417_holder_size_for_small_lamps

FOR 4" HOLDER FOR 50 W. LAMPS OR LESS.

4 in

Printed type/component specification only; no installed selection, quantity, world geometry or governing revision. Nominal holder size for lamps50W or less; not measured globe diameter.

IMG_1292 · Locate on drawing ↗

Drawing notation: FOR 4" HOLDER FOR 50 W. LAMPS OR LESS.

Printed type/component specification only; no installed selection, quantity, world geometry or governing revision. Nominal holder size for lamps50W or less; not measured globe diameter.

detail-lighting-img1292-417verified · printed

417_holder_size_for_large_lamps

FOR 6" HOLDER FOR 75 W. LAMPS & LARGER.

6 in

Printed type/component specification only; no installed selection, quantity, world geometry or governing revision. Nominal holder size for lamps75W and larger; no arbitrary intermediate selection.

IMG_1292 · Locate on drawing ↗

Drawing notation: FOR 6" HOLDER FOR 75 W. LAMPS & LARGER.

Printed type/component specification only; no installed selection, quantity, world geometry or governing revision. Nominal holder size for lamps75W and larger; no arbitrary intermediate selection.

detail-lighting-img1292-417verified · printed

417_small_holder_lamp_maximum

50 W. LAMPS OR LESS

50 W

Printed type/component specification only; no installed selection, quantity, world geometry or governing revision. Inclusive upper threshold for4-inch holder clause; not installed power or socket clause.

IMG_1292 · Locate on drawing ↗

Drawing notation: 50 W. LAMPS OR LESS

Printed type/component specification only; no installed selection, quantity, world geometry or governing revision. Inclusive upper threshold for4-inch holder clause; not installed power or socket clause.

detail-lighting-img1292-417verified · printed

417_large_holder_lamp_minimum

75 W. LAMPS & LARGER

75 W

Printed type/component specification only; no installed selection, quantity, world geometry or governing revision. Inclusive lower threshold for6-inch holder clause.

IMG_1292 · Locate on drawing ↗

Drawing notation: 75 W. LAMPS & LARGER

Printed type/component specification only; no installed selection, quantity, world geometry or governing revision. Inclusive lower threshold for6-inch holder clause.

lightspec1013e-img1292-general-specificationverified · printed

exposed_parts_material_reading

ALL EXPOSED PARTS OF FIXTURES SHALL BE MADE OF BRASS UNLESS OTHERWISE NOTED

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. This first clause concerns exposed parts; it does not establish an arm-tubing fabrication process.

IMG_1292 · Locate on drawing ↗

Drawing notation: ALL EXPOSED PARTS OF FIXTURES SHALL BE MADE OF BRASS UNLESS OTHERWISE NOTED

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. This first clause concerns exposed parts; it does not establish an arm-tubing fabrication process.

Calculated from: lightspec1013e-img1292-024-arm_tubing_construction

lightspec1013e-img1292-general-specificationverified · printed

oxidized_brass_preparation_color

ALL OXIDIZED BRASS FINISH SHALL HAVE THE METAL HIGHLY POLISHED TO A YELLOW BRASS COLOR

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Verified preparation/color subclause; later scouring/grain words are not silently filled in.

IMG_1292 · Locate on drawing ↗

Drawing notation: ALL OXIDIZED BRASS FINISH SHALL HAVE THE METAL HIGHLY POLISHED TO A YELLOW BRASS COLOR

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Verified preparation/color subclause; later scouring/grain words are not silently filled in.

Calculated from: lightspec1013e-img1292-040-finish_substrate_process_remaining

lightspec1013e-img1292-general-specificationverified · printed

oxidized_brass_dark_dip_sequence

AND THEN DIPPED TO A DARK COLOR BEFORE SCOURING

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Specific process sequence only.

IMG_1292 · Locate on drawing ↗

Drawing notation: AND THEN DIPPED TO A DARK COLOR BEFORE SCOURING

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Specific process sequence only.

Calculated from: lightspec1013e-img1292-040-finish_substrate_process_remaining

lightspec1013e-img1292-general-specificationverified · printed

oxidized_brass_recess_color_retention

ENOUGH OF THE DARK COLOR BEING LEFT IN THE RECESSES

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Color retention subclause only; no quantitative tone or relief-depth inference.

IMG_1292 · Locate on drawing ↗

Drawing notation: ENOUGH OF THE DARK COLOR BEING LEFT IN THE RECESSES

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Color retention subclause only; no quantitative tone or relief-depth inference.

Calculated from: lightspec1013e-img1292-040-finish_substrate_process_remaining

lightspec1013e-img1292-general-specificationverified · printed

final_lacquer_coat

ALL FIXTURES SHALL HAVE AN EVEN COAT OF HIGHEST GRADE LACQUER

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Final coat requirement; not a measured film thickness.

IMG_1292 · Locate on drawing ↗

Drawing notation: ALL FIXTURES SHALL HAVE AN EVEN COAT OF HIGHEST GRADE LACQUER

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Final coat requirement; not a measured film thickness.

Calculated from: lightspec1013e-img1292-040-finish_substrate_process_remaining

lightspec1013e-img1292-general-specificationverified · printed

dried_lacquer_surface

WHICH AFTER DRYING SHALL HAVE A HARD SURFACE

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Qualitative result only; no numeric hardness criterion.

IMG_1292 · Locate on drawing ↗

Drawing notation: WHICH AFTER DRYING SHALL HAVE A HARD SURFACE

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Qualitative result only; no numeric hardness criterion.

Calculated from: lightfine1013n-img_1292-005-final_lacquer_coat

lightspec1013e-img1292-general-specificationverified · printed

pendent_switch_wire_gauge_resolved

USE No.18 [type letters unresolved] REINFORCED BROWN COTTON CORDS FOR PENDENT SWITCHES ETC.

18 gauge

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Gauge number18 independently resolved; gauge is not diameter or physical thickness. TypePF lettering retained separately with review gap.

IMG_1292 · Locate on drawing ↗

Drawing notation: USE No.18 [type letters unresolved] REINFORCED BROWN COTTON CORDS FOR PENDENT SWITCHES ETC.

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Gauge number18 independently resolved; gauge is not diameter or physical thickness. TypePF lettering retained separately with review gap.

Calculated from: lightspec1013e-img1292-046-pendant_wire_gauge_unresolved

lightspec1013e-img1292-general-specificationverified · printed

pendent_switch_cord_cover

REINFORCED BROWN COTTON CORDS FOR PENDENT SWITCHES ETC.

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Application/cover wording; existing chain-silk conductor requirements remain separate.

IMG_1292 · Locate on drawing ↗

Drawing notation: REINFORCED BROWN COTTON CORDS FOR PENDENT SWITCHES ETC.

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Application/cover wording; existing chain-silk conductor requirements remain separate.

Calculated from: lightfine1013n-img_1292-007-pendent_switch_wire_gauge_resolved

lightspec1013e-img1292-general-specificationillegible · printed

pendent_switch_wire_type_designation_unresolved

TYPE PF [letter pair tentative]

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Letter pair too soft for verified designation; No18 is independently secure.

IMG_1292 · Locate on drawing ↗

Drawing notation: TYPE PF [letter pair tentative]

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Letter pair too soft for verified designation; No18 is independently secure.

Calculated from: lightfine1013n-img_1292-007-pendent_switch_wire_gauge_resolved

lightspec1013e-img1292-general-specificationverified · printed

existing_building_stud_size_resolved

IN OLD BUILDINGS STUDS ARE GENERALLY 1/2 IN.

0.5 in

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Generic old-building stud nominal size; field-verification requirement still governs this courthouse, so no actual installed stud size follows.

IMG_1292 · Locate on drawing ↗

Drawing notation: IN OLD BUILDINGS STUDS ARE GENERALLY 1/2 IN.

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Generic old-building stud nominal size; field-verification requirement still governs this courthouse, so no actual installed stud size follows.

Calculated from: lightspec1013e-img1292-050-existing_building_fixture_stud_size, lightspec1013e-img1292-049-fixture_stud_field_verification

lightspec1013e-img1292-general-specificationillegible · printed

new_building_stud_fraction_remaining

NEW BUILDINGS MAY HAVE [3/8?] STUDS

Numeric value unresolved

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Visible fraction resembles3/8 but numerator is insufficiently secure; both earlier option placeholders retained. No verified second numerical alternative follows.

IMG_1292 · Locate on drawing ↗

Drawing notation: NEW BUILDINGS MAY HAVE [3/8?] STUDS

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Visible fraction resembles3/8 but numerator is insufficiently secure; both earlier option placeholders retained. No verified second numerical alternative follows.

Calculated from: lightspec1013e-img1292-051-new_building_fixture_stud_option_1, lightspec1013e-img1292-052-new_building_fixture_stud_option_2

lightspec1013e-img1292-general-specificationunreviewed · printed

arm_tubing_process_still_unestablished

Unresolved

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Reading exposed-parts brass closes source wording only; no independent arm-tubing manufacturing clause verified in this bounded source region.

IMG_1292 · Locate on drawing ↗

Printed miscellaneous-fixture GENERAL NOTES only, subject to printed exceptions and unresolved issue authority. No installed material, dimension or world geometry follows. Reading exposed-parts brass closes source wording only; no independent arm-tubing manufacturing clause verified in this bounded source region.

Calculated from: lightspec1013e-img1292-024-arm_tubing_construction

lightspec1013e-img1292-general-specificationverified · printed

new_building_stud_nominal_fraction_resolved

NEW BUILDINGS MAY HAVE 3/8 STUDS

0.375 in

Source-local type/detail, original printed layer; no installed quantity, room/floor assignment, world coordinate or accepted geometry. Inch unit inherited from immediately preceding old-building sentence; nominal stud designation. Single new-building fraction visible, no second option verified.

IMG_1292 · Locate on drawing ↗

Drawing notation: NEW BUILDINGS MAY HAVE 3/8 STUDS

Source-local type/detail, original printed layer; no installed quantity, room/floor assignment, world coordinate or accepted geometry. Inch unit inherited from immediately preceding old-building sentence; nominal stud designation. Single new-building fraction visible, no second option verified.

Calculated from: lightfine1013n-img_1292-011-new_building_stud_fraction_remaining, lightspec1013e-img1292-051-new_building_fixture_stud_option_1, lightspec1013e-img1292-049-fixture_stud_field_verification

lightspec1013e-img1292-general-specificationverified · printed

pendent_switch_wire_type_letters_resolved

USE No 18 TYPE PF REINFORCED BROWN COTTON CORDS FOR PENDENT SWITCHES ETC.

Source-local type/detail, original printed layer; no installed quantity, room/floor assignment, world coordinate or accepted geometry. PF printed type-letter designation; gauge18 and covering/application reuse prior verified properties.

IMG_1292 · Locate on drawing ↗

Drawing notation: USE No 18 TYPE PF REINFORCED BROWN COTTON CORDS FOR PENDENT SWITCHES ETC.

Source-local type/detail, original printed layer; no installed quantity, room/floor assignment, world coordinate or accepted geometry. PF printed type-letter designation; gauge18 and covering/application reuse prior verified properties.

Calculated from: lightfine1013n-img_1292-009-pendent_switch_wire_type_designation_unresolved

detail-lighting-img1292-glassnotesverified · printed

type_a_large_specification_designation_resolved

INDICATED IN SPEC. AS "A11"

Source-local type/detail, original printed layer; no installed quantity, room/floor assignment, world coordinate or accepted geometry. A11 refers to preceding11-or12-inch-diameter,14-inch-deep,6-inch-holder acorn-globe requirement; no installed schedule mapping.

IMG_1292 · Locate on drawing ↗

Drawing notation: INDICATED IN SPEC. AS "A11"

Source-local type/detail, original printed layer; no installed quantity, room/floor assignment, world coordinate or accepted geometry. A11 refers to preceding11-or12-inch-diameter,14-inch-deep,6-inch-holder acorn-globe requirement; no installed schedule mapping.

Calculated from: lightspec1013e-img1292-063-type_a_large_specification_designation

detail-lighting-img1292-glassnotesverified · printed

type_b_6in_ball_holder_fraction_resolved

6" x 3 1/4"

3.25 in

Source-local type/detail, original printed layer; no installed quantity, room/floor assignment, world coordinate or accepted geometry. Holder nominal size paired with6in ball; not globe wall thickness.

IMG_1292 · Locate on drawing ↗

Drawing notation: 6" x 3 1/4"

Source-local type/detail, original printed layer; no installed quantity, room/floor assignment, world coordinate or accepted geometry. Holder nominal size paired with6in ball; not globe wall thickness.

Calculated from: lightspec1013e-img1292-069-type_b_6in_holder_size, lightspec1013e-img1292-068-type_b_6in_ball_diameter

detail-lighting-img1292-glassnotesverified · printed

type_b_7in_ball_holder_fraction_resolved

7" x 3 1/4"

3.25 in

Source-local type/detail, original printed layer; no installed quantity, room/floor assignment, world coordinate or accepted geometry. Holder nominal size paired with7in ball; not globe wall thickness.

IMG_1292 · Locate on drawing ↗

Drawing notation: 7" x 3 1/4"

Source-local type/detail, original printed layer; no installed quantity, room/floor assignment, world coordinate or accepted geometry. Holder nominal size paired with7in ball; not globe wall thickness.

Calculated from: lightspec1013e-img1292-071-type_b_7in_holder_size, lightspec1013e-img1292-070-type_b_7in_ball_diameter

lightspec1013e-img1292-general-specificationillegible · printed

arm_tubing_construction

ALL TUBING USED FOR ARMS SHALL BE MADE OF ... UNLESS OTHERWISE NOTED

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. The specific tubing-process wording is not secure; retain the actual arm scope and await another exposure.

IMG_1292 · Locate on drawing ↗

Drawing notation: ALL TUBING USED FOR ARMS SHALL BE MADE OF ... UNLESS OTHERWISE NOTED

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. The specific tubing-process wording is not secure; retain the actual arm scope and await another exposure.

lightspec1013e-img1292-general-specificationverified · printed

canopy_plate_material

ALL CANOPIES AND PLATES SHALL BE OF No20 B&S GAUGE BRASS

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Canopies/plates specifically brass; not all castings inferred brass.

IMG_1292 · Locate on drawing ↗

Drawing notation: ALL CANOPIES AND PLATES SHALL BE OF No20 B&S GAUGE BRASS

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Canopies/plates specifically brass; not all castings inferred brass.

lightspec1013e-img1292-general-specificationverified · printed

canopy_plate_gauge

No20 B&S GAUGE BRASS

20 B&S-gauge

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Gauge is an identifier; no physical thickness conversion.

IMG_1292 · Locate on drawing ↗

Drawing notation: No20 B&S GAUGE BRASS

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Gauge is an identifier; no physical thickness conversion.

lightspec1013e-img1292-general-specificationverified · printed

slip_seating_ring_construction

SLIP AND SEATING RINGS SHALL BE OF SOLID TURNED METAL

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

IMG_1292 · Locate on drawing ↗

Drawing notation: SLIP AND SEATING RINGS SHALL BE OF SOLID TURNED METAL

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

lightspec1013e-img1292-general-specificationverified · printed

ring_securing_fastener_designation

SECURED WITH No6-32 SCREWS

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Screw designation retained as text;6 and32 are not independent lengths.

IMG_1292 · Locate on drawing ↗

Drawing notation: SECURED WITH No6-32 SCREWS

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Screw designation retained as text;6 and32 are not independent lengths.

lightspec1013e-img1292-general-specificationverified · printed

bushing_material

ALL BUSHINGS ... SHALL BE OF FIBRE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Preserve except-as-shown qualification; no all-component material assumption.

IMG_1292 · Locate on drawing ↗

Drawing notation: ALL BUSHINGS ... SHALL BE OF FIBRE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Preserve except-as-shown qualification; no all-component material assumption.

lightspec1013e-img1292-general-specificationverified · printed

composition_bushing_exclusion

COMPOSITION BUSHINGS WILL NOT BE ACCEPTED IN LIEU OF FIBRE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Authoring exclusion; do not replace with the composition/fiber receptacle illustrated on other sheets.

IMG_1292 · Locate on drawing ↗

Drawing notation: COMPOSITION BUSHINGS WILL NOT BE ACCEPTED IN LIEU OF FIBRE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Authoring exclusion; do not replace with the composition/fiber receptacle illustrated on other sheets.

lightspec1013e-img1292-general-specificationverified · printed

casing_gauge

CASINGS SHALL BE No20 B&S GAUGE

20 B&S-gauge

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

IMG_1292 · Locate on drawing ↗

Drawing notation: CASINGS SHALL BE No20 B&S GAUGE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

lightspec1013e-img1292-general-specificationverified · printed

wireway_edge_finish

REMOVE ALL BURRS AND SHARP EDGES FROM WIRE WAYS

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

IMG_1292 · Locate on drawing ↗

Drawing notation: REMOVE ALL BURRS AND SHARP EDGES FROM WIRE WAYS

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

lightspec1013e-img1292-general-specificationverified · printed

receptacle_material

PORCELAIN RECEPTACLES SHALL BE OF TYPE MOST SUITABLE FOR THE FIXTURES

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

IMG_1292 · Locate on drawing ↗

Drawing notation: PORCELAIN RECEPTACLES SHALL BE OF TYPE MOST SUITABLE FOR THE FIXTURES

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

lightspec1013e-img1292-general-specificationverified · printed

socket_key_condition

USE PORCELAIN KEY OR KEYLESS SOCKETS AS NOTED

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Conditional key/keyless choice requires the type callout, not a general single choice.

IMG_1292 · Locate on drawing ↗

Drawing notation: USE PORCELAIN KEY OR KEYLESS SOCKETS AS NOTED

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Conditional key/keyless choice requires the type callout, not a general single choice.

lightspec1013e-img1292-general-specificationillegible · printed

socket_nipple_material

ALL BRASS SHELL SOCKETS ... NIPPLE ...

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Nipple material clause is not fully secure; brass-shell socket term is readable but not enough to reconstruct full sentence.

IMG_1292 · Locate on drawing ↗

Drawing notation: ALL BRASS SHELL SOCKETS ... NIPPLE ...

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Nipple material clause is not fully secure; brass-shell socket term is readable but not enough to reconstruct full sentence.

lightspec1013e-img1292-general-specificationverified · printed

socket_cap_retention

ALL BRASS SHELL SOCKETS SHALL HAVE AMPLE MEANS FOR HOLDING CAP TO SHELL

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

IMG_1292 · Locate on drawing ↗

Drawing notation: ALL BRASS SHELL SOCKETS SHALL HAVE AMPLE MEANS FOR HOLDING CAP TO SHELL

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption.

lightspec1013e-img1292-general-specificationunreviewed · printed

socket_catch_preference

... SHELL AND THREADED CATCH TYPES ARE PREFERABLE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. First preferred shell-type word remains unresolved; threaded-catch preference readable.

IMG_1292 · Locate on drawing ↗

Drawing notation: ... SHELL AND THREADED CATCH TYPES ARE PREFERABLE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. First preferred shell-type word remains unresolved; threaded-catch preference readable.

lightspec1013e-img1292-general-specificationverified · printed

mogul_socket_condition

USE MOGUL SOCKETS WHERE NOTED IN THE LAMP SCHEDULE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Missing governing schedule controls application.

IMG_1292 · Locate on drawing ↗

Drawing notation: USE MOGUL SOCKETS WHERE NOTED IN THE LAMP SCHEDULE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Missing governing schedule controls application.

lightspec1013e-img1292-general-specificationverified · printed

finish_plating_process

ALL FIXTURES SHALL BE FINISHED BY ELECTRO-PLATING

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Readable first finish instruction only; following process/color clauses are not collapsed into guessed wording.

IMG_1292 · Locate on drawing ↗

Drawing notation: ALL FIXTURES SHALL BE FINISHED BY ELECTRO-PLATING

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Readable first finish instruction only; following process/color clauses are not collapsed into guessed wording.

lightspec1013e-img1292-general-specificationillegible · printed

finish_substrate_process_remaining

ALL OXIDIZED BRASS ... [intermediate plating, cleaning and grain clauses unresolved]

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Identifiable intermediate finish clauses inspected; full words still require companion/master rereading.

IMG_1292 · Locate on drawing ↗

Drawing notation: ALL OXIDIZED BRASS ... [intermediate plating, cleaning and grain clauses unresolved]

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Identifiable intermediate finish clauses inspected; full words still require companion/master rereading.

lightspec1013e-img1292-general-specificationverified · printed

chain_conductor_gauge

No16 SINGLE CONDUCTOR STRANDED SILK COVERED WIRE

16 gauge

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. For chain-stem fixtures. Gauge number not conductor diameter.

IMG_1292 · Locate on drawing ↗

Drawing notation: No16 SINGLE CONDUCTOR STRANDED SILK COVERED WIRE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. For chain-stem fixtures. Gauge number not conductor diameter.

lightspec1013e-img1292-general-specificationverified · printed

chain_conductor_cover

STRANDED SILK COVERED WIRE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Chain-stem conductor cover only.

IMG_1292 · Locate on drawing ↗

Drawing notation: STRANDED SILK COVERED WIRE

IMG1292 general-notes requirement for the illustrated miscellaneous fixture family only, subject to its printed exceptions; no building-wide material or installation assumption. Chain-stem conductor cover only.

View all source photographs →