Gus J. SolomonUnited States Courthouse
MenuClose
← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs
464
Identified objects
4872
Verified printed values
12046
Disputed values
20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

Clear filters
IMG_1099 · Folder 191

Lobby & Foyer Details — Foyer Doors, Bulletin Boards, Bay Q, Etc.

Sheet W-218

Extraction: Reviewed · extraction partial. The W-218 lobby-writing-desk region was reviewed text-first, then as one full upright WebP and sequential focused crops. Side/end elevations, half top plan, half underside plan, Section A-A and pen-tray section were inspected. The remainder of W-218 is outside this bounded extraction. The desk profile/detail regions named in this package were reviewed. Unreadable and unspecified properties remain explicit; the rest of W-218 is outside scope. Reused lobby-writing-desk-first.json; no source image reopened. Reused the verified W218 lobby-writing-desk envelope and support-layout extraction; no drawing reopened. Bounded W218 plate type and W3 plan-candidate gate; not an installed desk placement. Main Street foyer/lobby door-screen line, bulletin cases, bronze directory and lobby furniture family. Normalized from an existing text re-audit; this import did not reopen the source image. W3 Main foyer/public lobby screen physical-polygon gate; source group review remains partial. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. W217/W218 T/U/V screen vertical/depth gate; targeted regions only. Main/foyer-lobby Bay U screen physical-segment gate; no finite solid authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Partial timed visual review: Source-local additive printed detail evidence; no installed quantity, operating clear dimensions, room geometry or accepted placement. Partial timed visual review: Source-local printed detail or selected note only. No installed quantity, clear opening, building placement or accepted geometry established. Partial timed visual review: undefined Partial timed visual review: Desk Section A-A / pen tray and adjacent directory model marks

Unresolved extraction work
  • Several small Section A-A substrate, channel, washer/bolt and attachment notes remain illegible.
  • The small pen-tray dimension was not promoted and remains null.
  • Leg/core sections, scroll curvature/section and ornament contours are not dimensioned in the reviewed legible callouts.
  • Metal alloy and finish are not established by the desk callouts.
  • Installed desk quantity, exact positions, orientations and as-built survival remain unverified.
  • No source-relative vector trace, photograph registration or pixel-to-inch conversion was performed.
  • w218-desk-missing-top-edge-profile: Small Section A-A notes remain partly illegible; pixel scaling is prohibited.
  • w218-desk-missing-top-edge-minor-note: Only the beginning appears to read PRESS...; it was not promoted.
  • w218-desk-missing-screw-specification: SCREWS is legible; the adjoining specification is not.
  • w218-desk-missing-angle-material: The size and ANGLE designation are printed, but the material is not legible.
  • w218-desk-missing-channel-weight: Only 4-inch channel is legible.
  • w218-desk-missing-shell-section: The shell is visible around the channel; its small fraction cannot be read reliably.
  • w218-desk-missing-pierced-trace: Elevation linework supports only a qualitative narrow vertical field.
  • w218-desk-missing-apron-trace: No source-relative trace was made and no dimensions are printed.
  • w218-desk-missing-scroll-profile: End elevation establishes topology and symmetry only.
  • w218-desk-missing-pen-tray-depth: The 3 1/4-inch cross-section width is legible; no depth dimension is.
  • w218-desk-missing-pen-tray-details: These are visible but not dimensioned.
  • w218-desk-missing-washer-thickness: Only the 4 x 4 inch plan size is printed.
  • w218-desk-missing-slab-depth: The section labels the slab underside but supplies no reliable depth.
  • w218-desk-missing-metal-alloy-finish: Desk-specific callouts say cast metal, pierced ornament and steel plate; they do not identify the ornamental alloy or finish.
  • W-218 has no installed quantity, plan coordinates, rotation or keyed W3 symbol in the reviewed desk detail.
  • As-built correspondence remains unresolved.
  • Leg sections, scroll curvature, ornament profile and relief, frame/apron profiles, pen tray, alloy and finish remain unresolved.
  • W218 does not print installed coordinates or a W3 detail key.
  • 10-inch plate axis relative to desk length
  • plate-center position relative to support centerline
  • base-plate hole positions and diameters
  • steel grade and finish
  • accepted W3-to-W218 physical type/instance mapping and as-built transforms
  • Complete drawing-note transcription
  • Every dimension and bay placement
  • Detailed hardware/fastener schedule
  • Exact cross-sheet bay correspondence
  • Cross-photo physical deduplication
  • Complete surviving-object inventory
  • Exact dimensions
  • Construction/alteration chronology
  • Condition assessment
  • P-6 component extraction
  • Installed fixture schedule and positions
  • As-built correspondence
  • Fixture finish and glass color
  • segment-by-segment material and face classes
  • accepted W3-to-detail endpoint/face registration with independent held-out check
  • world XZ footprints and depths for each pier/screen segment
  • six finished jamb X limits on each side plus rough openings and reveals
  • door/head and transom limits
  • checked threshold bottom and finished screen/pier top elevations
  • resolution of the lobby ceiling reading conflict and scope
  • securely dimensioned and registered threshold bottom/top
  • door head and upper glazing bottom/top with clear dimension endpoints
  • finished screen/pier top on both room sides
  • front/back finished face assignments and segment-specific transverse depths
  • accepted W3-to-W217/W218 face/endpoint registration with held-out check
  • physical XZ segment and six finished door-gap polygons
  • classified north/south finished face or axis and world Z control
  • segment-by-segment thickness and joins
  • accepted west/east pier or bay-division edge class
  • finished jamb limits on both faces
  • threshold bottom/top and door head in local Y
  • finished upper screen and pier bounds
  • independent held-out metric registration
  • Two classified finished host-wall face stations and a closed host segment
  • Frame outer/inner face depths, actual section thickness and reveal return
  • Accepted left/right finished frame jamb stations and rough opening limits
  • Frame sill/threshold top and underside tied to the exterior landing and first-floor finish
  • Frame head elevation and vertical transom/glazing limits
  • Material/profile build-up for bronze frame and glass
  • Accepted opening cut through the host wall and as-built correspondence
  • Fine fractions, witness endpoint classification, and remaining note transcription require targeted crop review
  • Companion/revision authority and installed room/floor registration remain outstanding
  • Modeling and whole-building acceptance checks not performed
  • Uninspected regions and fine fractions remain outstanding
  • Source-to-installed-object mapping and revision authority unresolved
  • Whole-building acceptance not performed
  • Section A-A small substrate, edge, screw and shell-fraction notes remain unreadable; no angle alloy or scroll material is established; pen-tray depth is not dimensioned in inspected section.
  • Installed instance mapping, world placement, companion/revision authority and whole-building acceptance remain unresolved.
  • Installed instance quantity, floor/room registration, physical transforms and as-built correspondence remain unresolved.
  • All uninspected regions, remaining notes/fractions/profiles, companion details and historical revision authority remain open.
  • Whole-building architectural acceptance has not been performed.
  • Section A-A small substrate/edge/screw/shell notes remain insufficiently legible; no exact profile or screw specification promoted.

Download OCR observations (unverified)

Loading the selected drawing…

Scroll or pinch to inspect this drawing. Archival drawing photograph · Oregon Historical Society research collections.

Open source image separately ↗

104 matching properties

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

furniture-w218-lobby-writing-desk-detail-01-pen-trayverified · printed

material_description

Cast metal

The alloy and finish are not named. Source audit state: verified.

IMG_1099 · sheet-W-218 · Locate on drawing ↗

Drawing notation: CAST METAL PEN TRAY

furniture-w218-lobby-writing-desk-detail-01-pen-tray-circular-recess-prototypeverified · observed

count

2 observed

2 count

One circular recess is shown at each end of the grooved field. Function is not labeled; do not rename these as inkwells without another source. Source audit state: verified.

IMG_1099 · sheet-W-218 · Locate on drawing ↗

Drawing notation: HALF PLAN OF TOP

Calculated from: w218-desk-profile-pen-tray-outline

furniture-w218-lobby-writing-desk-detail-01-leg-floor-anchor-prototypeverified · printed-and-observed

anchorage_relationship

Bolts extend below the finished floor/base plate to washers at the underside of the rough concrete slab

Source audit state: verified.

IMG_1099 · sheet-W-218 · Locate on drawing ↗

Drawing notation: FIN FLOOR LINE; 3/4" BOLTS; 4" x 4" WASHERS; UNDER SIDE OF ROUGH CONCRETE SLAB

Calculated from: w218-desk-profile-base-plate-material, w218-desk-profile-floor-bolt-diameter, w218-desk-profile-floor-washer-width, w218-desk-profile-floor-washer-length

f1-public-lobby-desk-plan-groupunreviewed · cross-sheet-semantic-candidate

w218_type_correspondence

Candidate only; no printed linking callout

The room/function wording and coordinated 1933 sheet set make W-218 the leading candidate type. W3 supplies no W-218 reference, detail bubble or type mark, and W-218 supplies no installation schedule or keyed plan symbol. Similarity and later photographs cannot promote the candidate to a verified type assignment.

IMG_1202 · sheet-W3 · Locate on drawing ↗

Drawing notation: DESK

IMG_1099 · sheet-W-218 · Locate on drawing ↗

Drawing notation: DETAILS OF LOBBY DESKS

furniture-type-w218-lobby-writing-deskunreviewed · cross-sheet-review

installed_quantity

Unresolved

Numeric value unresolved

W3 establishes four planned generic DESK symbols, not four verified instances of the W-218 detail. The null remains provisional pending a keyed type correspondence.

IMG_1202 · sheet-W3 · Locate on drawing ↗

Drawing notation: DESK; DESK; DESK; DESK

IMG_1099 · sheet-W-218 · Locate on drawing ↗

Drawing notation: DETAILS OF LOBBY DESKS

The type-detail title establishes lobby use but supplies no installed schedule or keyed W3 symbol.

f1-public-lobby-w218-correlated-preview-systemverified · observed

Physical furniture acceptance

WITHHELD — analytical envelope/support study only

No leg thickness, scroll, ornament, apron, edge, pen-tray or fastener geometry is invented. No accepted historical or as-built transform is asserted.

IMG_1099 · sheet-W-218 · Locate on drawing ↗

Drawing notation: DETAILS OF LOBBY DESKS

f1-public-lobby-postal-wall-systemunreviewed · observed

typical_service_module_width

customer counter modules repeatedly read about 7 feet 6 inches

The report describes a repeated approximate reading without accepted station assignments.

IMG_1202 · sheet-W3 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing verified package; image not reopened. Named PUBLIC LOBBY and printed ceiling-height reading

IMG_1204 · sheet-W3 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing text re-audit only; image not reopened. First-floor public-lobby plan, reported 18'-3" ceiling-height reading and repeated 14'/15' structural dimensions

IMG_1089 · sheet-W214 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing text re-audit only. Lobby overview, floor/ceiling bay grid, Panels A-D and service-wall sequence

IMG_1302 · sheet-W214 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing text re-audit only. Lobby overview, floor/ceiling bay grid, Panels A-D and service-wall sequence

IMG_1090 · sheet-W215 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing text re-audit only. Bays E, I, K and B; bronze/glass screens, Letters/Packages, Registry, counters, money drawer and locks

IMG_1091 · sheet-W215 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing text re-audit only. Bays E, I, K and B; bronze/glass screens, Letters/Packages, Registry, counters, money drawer and locks

IMG_1092 · sheet-W215 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing text re-audit only. Bays E, I, K and B; bronze/glass screens, Letters/Packages, Registry, counters, money drawer and locks

IMG_1303 · sheet-W215 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing text re-audit only. Bays E, I, K and B; bronze/glass screens, Letters/Packages, Registry, counters, money drawer and locks

IMG_1093 · sheet-W216 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing text re-audit only. Parcel Post/Registry windows, roll-down curtains, staff-side casework and illuminated STAMPS sign

IMG_1094 · sheet-W216 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing text re-audit only. Parcel Post/Registry windows, roll-down curtains, staff-side casework and illuminated STAMPS sign

IMG_1304 · sheet-W216 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing text re-audit only. Parcel Post/Registry windows, roll-down curtains, staff-side casework and illuminated STAMPS sign

IMG_1095 · sheet-W217 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing text re-audit and existing verified elevator package; images not reopened. Bay P directory, paired door, Elevator No. 2 entrance, clock and other glazed door/screen bays

IMG_1097 · sheet-W217 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing text re-audit and existing verified elevator package; images not reopened. Bay P directory, paired door, Elevator No. 2 entrance, clock and other glazed door/screen bays

IMG_1098 · sheet-W217 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing text re-audit and existing verified elevator package; images not reopened. Bay P directory, paired door, Elevator No. 2 entrance, clock and other glazed door/screen bays

IMG_1305 · sheet-W217 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing text re-audit and existing verified elevator package; images not reopened. Bay P directory, paired door, Elevator No. 2 entrance, clock and other glazed door/screen bays

IMG_1099 · sheet-W-218 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing text re-audit and existing writing-desk packages; images not reopened. Main Street foyer/lobby door-screen line, bulletin cases, bronze directory and lobby furniture family

IMG_1306 · sheet-W-218 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing text re-audit and existing writing-desk packages; images not reopened. Main Street foyer/lobby door-screen line, bulletin cases, bronze directory and lobby furniture family

IMG_1289 · sheet-WLF-246 · View drawing ↗

Drawing notation: customer counter modules repeatedly read about 7 feet 6 inches

Existing verified package plus re-audit report; image not reopened. P-5 Public Lobby and P-6 Registry/Box/Parcel Post alcove fixture types

material-postal-screen-plate-glassunreviewed · printed

Applications and finish

tall postal-screen upper fields; registry/service openings; paired lobby doors and fixed panels; directory access glazing · clear where explicitly described; otherwise unresolved

printed material identification transcribed in re-audits. Report transcription; physical thickness, joint layout and finish samples remain unresolved.

IMG_1090 · sheet-W215 · View drawing ↗

Drawing notation: Plate glass in postal and door-screen assemblies

Existing text re-audit only. Bays E, I, K and B; bronze/glass screens, Letters/Packages, Registry, counters, money drawer and locks

IMG_1091 · sheet-W215 · View drawing ↗

Drawing notation: Plate glass in postal and door-screen assemblies

Existing text re-audit only. Bays E, I, K and B; bronze/glass screens, Letters/Packages, Registry, counters, money drawer and locks

IMG_1092 · sheet-W215 · View drawing ↗

Drawing notation: Plate glass in postal and door-screen assemblies

Existing text re-audit only. Bays E, I, K and B; bronze/glass screens, Letters/Packages, Registry, counters, money drawer and locks

IMG_1303 · sheet-W215 · View drawing ↗

Drawing notation: Plate glass in postal and door-screen assemblies

Existing text re-audit only. Bays E, I, K and B; bronze/glass screens, Letters/Packages, Registry, counters, money drawer and locks

IMG_1093 · sheet-W216 · View drawing ↗

Drawing notation: Plate glass in postal and door-screen assemblies

Existing text re-audit only. Parcel Post/Registry windows, roll-down curtains, staff-side casework and illuminated STAMPS sign

IMG_1094 · sheet-W216 · View drawing ↗

Drawing notation: Plate glass in postal and door-screen assemblies

Existing text re-audit only. Parcel Post/Registry windows, roll-down curtains, staff-side casework and illuminated STAMPS sign

IMG_1304 · sheet-W216 · View drawing ↗

Drawing notation: Plate glass in postal and door-screen assemblies

Existing text re-audit only. Parcel Post/Registry windows, roll-down curtains, staff-side casework and illuminated STAMPS sign

IMG_1095 · sheet-W217 · View drawing ↗

Drawing notation: Plate glass in postal and door-screen assemblies

Existing text re-audit and existing verified elevator package; images not reopened. Bay P directory, paired door, Elevator No. 2 entrance, clock and other glazed door/screen bays

IMG_1097 · sheet-W217 · View drawing ↗

Drawing notation: Plate glass in postal and door-screen assemblies

Existing text re-audit and existing verified elevator package; images not reopened. Bay P directory, paired door, Elevator No. 2 entrance, clock and other glazed door/screen bays

IMG_1098 · sheet-W217 · View drawing ↗

Drawing notation: Plate glass in postal and door-screen assemblies

Existing text re-audit and existing verified elevator package; images not reopened. Bay P directory, paired door, Elevator No. 2 entrance, clock and other glazed door/screen bays

IMG_1305 · sheet-W217 · View drawing ↗

Drawing notation: Plate glass in postal and door-screen assemblies

Existing text re-audit and existing verified elevator package; images not reopened. Bay P directory, paired door, Elevator No. 2 entrance, clock and other glazed door/screen bays

IMG_1099 · sheet-W-218 · View drawing ↗

Drawing notation: Plate glass in postal and door-screen assemblies

Existing text re-audit and existing writing-desk packages; images not reopened. Main Street foyer/lobby door-screen line, bulletin cases, bronze directory and lobby furniture family

IMG_1306 · sheet-W-218 · View drawing ↗

Drawing notation: Plate glass in postal and door-screen assemblies

Existing text re-audit and existing writing-desk packages; images not reopened. Main Street foyer/lobby door-screen line, bulletin cases, bronze directory and lobby furniture family

View all source photographs →