← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs: 464
Identified objects: 4872
Verified printed values: 12046
Disputed values: 20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

IMG_1087 · Folder 191

DETAILS OF ORNAMENTAL METALWORK

Sheet W-213

Extraction: Reviewed · extraction partial. W-213 title block; Main entrance handrail elevation; Main entrance baluster/post and anchorage; Main entrance title and Sheet 201 cross-reference Reused verified 2-foot-10-inch rail height and Model No. 10 fabrication identity. Partial timed visual review: Source-local additive detail review; no installed quantity, accepted room geometry, physical placement or wall cuts established. Partial timed visual review: Source-local grille specimen detail; installed quantities and cast alloy not inferred from neighboring handrail. Partial timed visual review: Printed source-local type/component or section control only; no accepted physical geometry, installed quantity or world registration. Original layer retained separately from revisions. Partial timed visual review: END/post native crop rechecked. Paired 7½-inch axis controls and ornamental model marks do not establish member/shaft outside width. Partial timed visual review: Main rail END/fork/side/support detail; source-local member/support geometry only. District Court and exterior grilles/property-line rails are separate regions. Partial timed visual review: undefined Partial timed visual review: Single upright targeted Main rail crop; prior 15-inch double-member axis pitch and bottom pole diameters reused without reopening their sources. No pixel widths promoted as measured profiles.

Highlighted reading: 4". W-213 local fabrication evidence only; no project rail layout or world insertion is established.

Show every recorded property on this drawing →

Unresolved extraction work

Flagpole/eagle details
District Court grille details
Exterior door/window grille details
Property-line pipe-rail/balustrade details
All model-numbered ornaments outside the Main entrance handrail
Rail member cross sections
Complete ornamental geometry
Post placement
As-built correspondence
Fine dimension fractions, witness endpoints and remaining small material callouts require targeted high-resolution review
Companion sheets, duplicate photographs and revision authority require reconciliation
Installed floor/room registration and whole-building modeling acceptance remain outstanding
Complete fine fabrication dimensions and all cropped/companion regions
Installed assignments and revision reconciliation
Remaining fine fractions, witness endpoints, material/finish exceptions and regional notes require targeted review.
Original/revision and companion authority remains unreconciled; no historical layer selected.
Installed instances, quantities, floor/room hosts and physical registration remain unestablished; no modeling or architectural release.
Selected crop contains grille plan and material-code legend, not property-line pipe profiles.
Pipe-rail/stanchion dimensions, room flagstaff detail, Main rail profiles and pole controls not re-inspected.
Exact shaft/member cross sections remain unresolved; post layout, anchorage/control assignments and step geometry require their own evidence.
Remaining notes, dimensions, endpoint classes and companion details outside the bounded crop require review.
Historical issue/revision authority, installed instances, quantities and physical registration remain unresolved; no geometry or architectural acceptance.
Remaining exact profile dimensions and post stations
Source-to-finish/step registration
Other sheet regions and revisions
No installed run/member separation accepted from these source-local controls
Stanchion/profile sizes, bolt dimensions, actual installation and pipe run registration remain open.
Remaining regional dimensions, notes, schedules, companion details and original/revision authority require review.
Installed instances, quantities, floor/room registration and continuous physical geometry remain unestablished; no architectural acceptance.
Remaining fine dimensions, notes, callouts, revisions and physical instance registration; no completeness or acceptance claim.

Download OCR observations (unverified)

Loading the selected drawing…

Scroll or pinch to inspect this drawing. The gold outline locates the selected reading. Archival drawing photograph · Oregon Historical Society research collections.

Open source image separately ↗

1 matching properties

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

main-north-entrance-bronze-rail-anchorageverified · printed

washer_nominal_width

4 in

The second washer dimension is 4 inches. Plan shape and the orthogonal dimension are not separately stated.

IMG_1087 · sheet-W213 · Locate on drawing ↗

Drawing notation: 1/4" x 4" WASHERS

W-213 local fabrication evidence only; no project rail layout or world insertion is established.

View all source photographs →