An identified object is not a fully modeled object. Missing dimensions, locations and relationships remain explicit.
registration-control · f4-grid-seModeling: not-modeled
Sixth/Madison candidate extreme perimeter-column center
Research representation: none. Architectural checks: pending.
Fourth floor
2 recorded properties
Still to extract or check- Independent fourth-floor span
- Physical axis-center identification
Inspect this object’s readings →View source IMG_1335 ↗
registration-control · f4-grid-swModeling: not-modeled
Broadway/Madison candidate extreme perimeter-column center
Research representation: none. Architectural checks: pending.
Fourth floor
2 recorded properties
Still to extract or check- Independent fourth-floor span
- Physical axis-center identification
Inspect this object’s readings →View source IMG_1335 ↗
registration-control · f4-grid-nwModeling: not-modeled
Broadway/Main candidate extreme perimeter-column center
Research representation: none. Architectural checks: pending.
Fourth floor
2 recorded properties
Still to extract or check- Independent fourth-floor span
- Physical axis-center identification
Inspect this object’s readings →View source IMG_1335 ↗
registration-control · f4-grid-neModeling: not-modeled
Sixth/Main candidate extreme perimeter-column center
Research representation: none. Architectural checks: pending.
Fourth floor
2 recorded properties
Still to extract or check- Independent fourth-floor span
- Physical axis-center identification
Inspect this object’s readings →View source IMG_1335 ↗
floor · f4-floor-outlineModeling: not-modeled
Fourth floor enclosed boundary
Research representation: boundary trace. Architectural checks: pending.
Fourth floor
10 recorded properties
Still to extract or check- Certified outside wall face
- Exact setbacks and pilasters
- Partition approval status
- Slab edge
- Ceiling height
- Accepted building registration
- Exact outside/slab/wall boundary classification
- Bay projections, pilasters and wall thicknesses
Inspect this object’s readings →View source IMG_1335 ↗
room · f4-room-437Modeling: not-modeled
437 · use unread on MEP underlay
Research representation: none. Architectural checks: pending.
Fourth floor
Historical room number: 437
Source relationships · not a verified physical connection
18 recorded properties
Still to extract or check- Architectural room boundary
- Use
- Clear dimensions
- Ceiling height
- Doors
- Finishes
- Clear dimensions and height
- Complete door/window inventory
- Finish/material schedule
- Fixtures, cabinets and furniture
- World placement
- closed boundary polygon
- exact wall-face classification
- wall thickness
- metric dimensions
- area
- ceiling height
- complete finish assignment
- complete opening inventory
- world registration
Inspect this object’s readings →View source IMG_1335 ↗
room · f4-room-436Modeling: not-modeled
436 · use unread on MEP underlay
Research representation: none. Architectural checks: pending.
Fourth floor
Historical room number: 436
Source relationships · not a verified physical connection
18 recorded properties
Still to extract or check- Architectural room boundary
- Use
- Clear dimensions
- Ceiling height
- Doors
- Finishes
- Clear dimensions and height
- Complete door/window inventory
- Finish/material schedule
- Fixtures, cabinets and furniture
- World placement
- closed boundary polygon
- exact wall-face classification
- wall thickness
- metric dimensions
- area
- ceiling height
- complete finish assignment
- complete opening inventory
- world registration
Inspect this object’s readings →View source IMG_1335 ↗
room · f4-room-435Modeling: not-modeled
435 · use unread on MEP underlay
Research representation: none. Architectural checks: pending.
Fourth floor
Historical room number: 435
Source relationships · not a verified physical connection
18 recorded properties
Still to extract or check- Architectural room boundary
- Use
- Clear dimensions
- Ceiling height
- Doors
- Finishes
- Clear dimensions and height
- Complete door/window inventory
- Finish/material schedule
- Fixtures, cabinets and furniture
- World placement
- closed boundary polygon
- exact wall-face classification
- wall thickness
- metric dimensions
- area
- ceiling height
- complete finish assignment
- complete opening inventory
- world registration
Inspect this object’s readings →View source IMG_1335 ↗
room · f4-room-434Modeling: not-modeled
434 · use unread on MEP underlay
Research representation: none. Architectural checks: pending.
Fourth floor
Historical room number: 434
Source relationships · not a verified physical connection
18 recorded properties
Still to extract or check- Architectural room boundary
- Use
- Clear dimensions
- Ceiling height
- Doors
- Finishes
- Clear dimensions and height
- Complete door/window inventory
- Finish/material schedule
- Fixtures, cabinets and furniture
- World placement
- closed boundary polygon
- exact wall-face classification
- wall thickness
- metric dimensions
- area
- ceiling height
- complete finish assignment
- complete opening inventory
- world registration
Inspect this object’s readings →View source IMG_1335 ↗
room · f4-room-433Modeling: not-modeled
433 · use unread on MEP underlay
Research representation: none. Architectural checks: pending.
Fourth floor
Historical room number: 433
Source relationships · not a verified physical connection
18 recorded properties
Still to extract or check- Architectural room boundary
- Use
- Clear dimensions
- Ceiling height
- Doors
- Finishes
- Clear dimensions and height
- Complete door/window inventory
- Finish/material schedule
- Fixtures, cabinets and furniture
- World placement
- closed boundary polygon
- exact wall-face classification
- wall thickness
- metric dimensions
- area
- ceiling height
- complete finish assignment
- complete opening inventory
- world registration
Inspect this object’s readings →View source IMG_1335 ↗
room · f4-room-432Modeling: not-modeled
432 · use unread on MEP underlay
Research representation: none. Architectural checks: pending.
Fourth floor
Historical room number: 432
Source relationships · not a verified physical connection
18 recorded properties
Still to extract or check- Architectural room boundary
- Use
- Clear dimensions
- Ceiling height
- Doors
- Finishes
- Clear dimensions and height
- Complete door/window inventory
- Finish/material schedule
- Fixtures, cabinets and furniture
- World placement
- closed boundary polygon
- exact wall-face classification
- wall thickness
- metric dimensions
- area
- ceiling height
- complete finish assignment
- complete opening inventory
- world registration
Inspect this object’s readings →View source IMG_1335 ↗
room · f4-room-431Modeling: not-modeled
431 · use unread on MEP underlay
Research representation: none. Architectural checks: pending.
Fourth floor
Historical room number: 431
Source relationships · not a verified physical connection
18 recorded properties
Still to extract or check- Architectural room boundary
- Use
- Clear dimensions
- Ceiling height
- Doors
- Finishes
- Clear dimensions and height
- Complete door/window inventory
- Finish/material schedule
- Fixtures, cabinets and furniture
- World placement
- closed boundary polygon
- exact wall-face classification
- wall thickness
- metric dimensions
- area
- ceiling height
- complete finish assignment
- complete opening inventory
- world registration
Inspect this object’s readings →View source IMG_1335 ↗
room · f4-room-430Modeling: not-modeled
430 · use unread on MEP underlay
Research representation: none. Architectural checks: pending.
Fourth floor
Historical room number: 430
Source relationships · not a verified physical connection
18 recorded properties
Still to extract or check- Architectural room boundary
- Use
- Clear dimensions
- Ceiling height
- Doors
- Finishes
- Clear dimensions and height
- Complete door/window inventory
- Finish/material schedule
- Fixtures, cabinets and furniture
- World placement
- closed boundary polygon
- exact wall-face classification
- wall thickness
- metric dimensions
- area
- ceiling height
- complete finish assignment
- complete opening inventory
- world registration
Inspect this object’s readings →View source IMG_1335 ↗
room · f4-room-429Modeling: not-modeled
429 · use unread on MEP underlay
Research representation: none. Architectural checks: pending.
Fourth floor
Historical room number: 429
Source relationships · not a verified physical connection
18 recorded properties
Still to extract or check- Architectural room boundary
- Use
- Clear dimensions
- Ceiling height
- Doors
- Finishes
- Clear dimensions and height
- Complete door/window inventory
- Finish/material schedule
- Fixtures, cabinets and furniture
- World placement
- closed boundary polygon
- exact wall-face classification
- wall thickness
- metric dimensions
- area
- ceiling height
- complete finish assignment
- complete opening inventory
- world registration
Inspect this object’s readings →View source IMG_1335 ↗
shaft · f4-elevator-1Modeling: analytical-preview
NO. 1
Research representation: boundary trace. Architectural checks: pending.
Fourth floor
45 recorded properties
Still to extract or check- Clear shaft size
- Approved door face
- Sill/threshold
- Hoistway wall assembly
- Exact boundary and wall construction
- Clear dimensions
- Door size
- Pit and overhead
- World placement
- clear width
- clear depth
- landing door width
- wall thickness
- guide rails
- pit
- overhead
- machine equipment
- accepted building transform
- Three independent W-6 interior/structural spans now diagnostically agree with the frozen transform within source-pick allowances; independent repicking, face classification and local distortion checks remain outstanding.
- The control intersections carry source-picking uncertainty and the photograph may retain local paper or lens distortion.
- A source-space boundary is not automatically an outside face, clear face, shaft wall, slab edge or opening.
- Only explicitly classified analytical locators below may use this transform; wholesale plan extrusion is prohibited.
- Extruding any transformed locator into physical walls, shafts, stairs or rooms.
- Treating control-fit zero as proof of accuracy.
- Using the coarse Elevator 3 or stair locator boundaries as clear or outside faces.
- Replacing unresolved wall, slab, opening or construction thicknesses with defaults.
Inspect this object’s readings →View source IMG_1335 ↗
shaft · f4-elevator-2Modeling: analytical-preview
NO. 2
Research representation: boundary trace. Architectural checks: pending.
Fourth floor
44 recorded properties
Still to extract or check- Clear shaft size
- Approved door face
- Sill/threshold
- Hoistway wall assembly
- Exact boundary and wall construction
- Clear dimensions
- Door size
- Pit and overhead
- World placement
- clear width
- clear depth
- landing door width
- wall thickness
- guide rails
- pit
- overhead
- machine equipment
- accepted building transform
- Three independent W-6 interior/structural spans now diagnostically agree with the frozen transform within source-pick allowances; independent repicking, face classification and local distortion checks remain outstanding.
- The control intersections carry source-picking uncertainty and the photograph may retain local paper or lens distortion.
- A source-space boundary is not automatically an outside face, clear face, shaft wall, slab edge or opening.
- Only explicitly classified analytical locators below may use this transform; wholesale plan extrusion is prohibited.
- Extruding any transformed locator into physical walls, shafts, stairs or rooms.
- Treating control-fit zero as proof of accuracy.
- Using the coarse Elevator 3 or stair locator boundaries as clear or outside faces.
- Replacing unresolved wall, slab, opening or construction thicknesses with defaults.
Inspect this object’s readings →View source IMG_1335 ↗
stair · f4-stair-bModeling: analytical-preview
f4 stair b
Research representation: boundary trace. Architectural checks: pending.
Fourth floor · Original mark: B
42 recorded properties
Still to extract or check- Exact opening
- Flight and landing geometry
- Riser/tread dimensions
- Headroom
- Riser count and height
- Tread depth
- Clear width
- Landing/opening geometry
- World placement
- riser count
- tread depth
- clear width
- landing thickness
- opening polygon
- headroom
- rail geometry
- accepted building transform
- Three independent W-6 interior/structural spans now diagnostically agree with the frozen transform within source-pick allowances; independent repicking, face classification and local distortion checks remain outstanding.
- The control intersections carry source-picking uncertainty and the photograph may retain local paper or lens distortion.
- A source-space boundary is not automatically an outside face, clear face, shaft wall, slab edge or opening.
- Only explicitly classified analytical locators below may use this transform; wholesale plan extrusion is prohibited.
- Extruding any transformed locator into physical walls, shafts, stairs or rooms.
- Treating control-fit zero as proof of accuracy.
- Using the coarse Elevator 3 or stair locator boundaries as clear or outside faces.
- Replacing unresolved wall, slab, opening or construction thicknesses with defaults.
Inspect this object’s readings →View source IMG_1335 ↗
stair · f4-stair-dModeling: analytical-preview
f4 stair d
Research representation: boundary trace. Architectural checks: pending.
Fourth floor · Original mark: D
42 recorded properties
Still to extract or check- Exact opening
- Flight and landing geometry
- Riser/tread dimensions
- Headroom
- Riser count and height
- Tread depth
- Clear width
- Landing/opening geometry
- World placement
- riser count
- tread depth
- clear width
- landing thickness
- opening polygon
- headroom
- rail geometry
- accepted building transform
- Three independent W-6 interior/structural spans now diagnostically agree with the frozen transform within source-pick allowances; independent repicking, face classification and local distortion checks remain outstanding.
- The control intersections carry source-picking uncertainty and the photograph may retain local paper or lens distortion.
- A source-space boundary is not automatically an outside face, clear face, shaft wall, slab edge or opening.
- Only explicitly classified analytical locators below may use this transform; wholesale plan extrusion is prohibited.
- Extruding any transformed locator into physical walls, shafts, stairs or rooms.
- Treating control-fit zero as proof of accuracy.
- Using the coarse Elevator 3 or stair locator boundaries as clear or outside faces.
- Replacing unresolved wall, slab, opening or construction thicknesses with defaults.
Inspect this object’s readings →View source IMG_1335 ↗
stair · f4-stair-eModeling: analytical-preview
f4 stair e
Research representation: boundary trace. Architectural checks: pending.
Fourth floor · Original mark: E
43 recorded properties
Still to extract or check- Exact opening
- Flight and landing geometry
- Riser/tread dimensions
- Headroom
- Riser count and height
- Tread depth
- Clear width
- Landing/opening geometry
- World placement
- riser count
- tread depth
- clear width
- landing thickness
- opening polygon
- headroom
- rail geometry
- accepted building transform
- Three independent W-6 interior/structural spans now diagnostically agree with the frozen transform within source-pick allowances; independent repicking, face classification and local distortion checks remain outstanding.
- The control intersections carry source-picking uncertainty and the photograph may retain local paper or lens distortion.
- A source-space boundary is not automatically an outside face, clear face, shaft wall, slab edge or opening.
- Only explicitly classified analytical locators below may use this transform; wholesale plan extrusion is prohibited.
- Extruding any transformed locator into physical walls, shafts, stairs or rooms.
- Treating control-fit zero as proof of accuracy.
- Using the coarse Elevator 3 or stair locator boundaries as clear or outside faces.
- Replacing unresolved wall, slab, opening or construction thicknesses with defaults.
Inspect this object’s readings →View source IMG_1335 ↗
circulation-region · f4-corridor-mainModeling: not-modeled
f4 corridor main
Research representation: boundary trace. Architectural checks: pending.
Fourth floor
12 recorded properties
Still to extract or check- Exact clear boundary
- Door instances
- Ceiling height
- Finishes
- Exact boundary
- Clear width
- World placement
Inspect this object’s readings →View source IMG_1335 ↗
circulation-region · f4-corridor-sixthModeling: not-modeled
f4 corridor sixth
Research representation: boundary trace. Architectural checks: pending.
Fourth floor
9 recorded properties
Still to extract or check- Exact clear boundary
- Door instances
- Ceiling height
- Finishes
Inspect this object’s readings →View source IMG_1335 ↗
circulation-region · f4-corridor-broadwayModeling: not-modeled
f4 corridor broadway
Research representation: boundary trace. Architectural checks: pending.
Fourth floor
9 recorded properties
Still to extract or check- Exact clear boundary
- Door instances
- Ceiling height
- Finishes
Inspect this object’s readings →View source IMG_1335 ↗
circulation-region · f4-corridor-madisonModeling: not-modeled
f4 corridor madison
Research representation: boundary trace. Architectural checks: pending.
Fourth floor
9 recorded properties
Still to extract or check- Exact clear boundary
- Door instances
- Ceiling height
- Finishes
Inspect this object’s readings →View source IMG_1335 ↗
court-opening · f4-central-court-opening-candidateModeling: not-modeled
f4 central court opening candidate
Research representation: boundary trace. Architectural checks: pending.
Fourth floor
13 recorded properties
Still to extract or check- Approved opening edge
- Parapet/wall thickness
- Level of roof below
- Void-to-corridor window conditions
- Exact edge
- Wall thickness
- World polygon
- Level below
Inspect this object’s readings →View source IMG_1335 ↗
analytical-envelope-surface · upper-envelope-curtain-mainModeling: analytical-preview
Envelope registration curtain · Main / north
Research representation: boundary trace. Architectural checks: pending.
First floor · Second floor · Third floor · Fourth floor · Fifth floor · Sixth floor · Seventh floor · Eighth floor
Source relationships · not a verified physical connection
1 recorded properties
Still to extract or check- Certified exterior wall face
- Wall thickness and construction
- Every opening and reveal
- Pilasters, projections, cornices and ornament
- Cross-floor corner correspondence acceptance
- As-built confirmation
Inspect this object’s readings →View source IMG_1202 ↗
analytical-envelope-surface · upper-envelope-curtain-broadwayModeling: analytical-preview
Envelope registration curtain · Broadway / west
Research representation: boundary trace. Architectural checks: pending.
First floor · Second floor · Third floor · Fourth floor · Fifth floor · Sixth floor · Seventh floor · Eighth floor
Source relationships · not a verified physical connection
1 recorded properties
Still to extract or check- Certified exterior wall face
- Wall thickness and construction
- Every opening and reveal
- Pilasters, projections, cornices and ornament
- Cross-floor corner correspondence acceptance
- As-built confirmation
Inspect this object’s readings →View source IMG_1202 ↗
analytical-envelope-surface · upper-envelope-curtain-madisonModeling: analytical-preview
Envelope registration curtain · Madison / south
Research representation: boundary trace. Architectural checks: pending.
First floor · Second floor · Third floor · Fourth floor · Fifth floor · Sixth floor · Seventh floor · Eighth floor
Source relationships · not a verified physical connection
1 recorded properties
Still to extract or check- Certified exterior wall face
- Wall thickness and construction
- Every opening and reveal
- Pilasters, projections, cornices and ornament
- Cross-floor corner correspondence acceptance
- As-built confirmation
Inspect this object’s readings →View source IMG_1202 ↗
analytical-envelope-surface · upper-envelope-curtain-sixthModeling: analytical-preview
Envelope registration curtain · Sixth / east
Research representation: boundary trace. Architectural checks: pending.
First floor · Second floor · Third floor · Fourth floor · Fifth floor · Sixth floor · Seventh floor · Eighth floor
Source relationships · not a verified physical connection
1 recorded properties
Still to extract or check- Certified exterior wall face
- Wall thickness and construction
- Every opening and reveal
- Pilasters, projections, cornices and ornament
- Cross-floor corner correspondence acceptance
- As-built confirmation
Inspect this object’s readings →View source IMG_1202 ↗
assembly · detail-floor4-radiator-rule-1335Modeling: not-modeled
Fourth-floor radiator design rule
Research representation: none. Architectural checks: pending.
Fourth floor
3 recorded properties
Still to extract or check- Remaining individual dimensions, service instances, fine callouts and routes require source review.
- Original/revised annotations, companion sheets and installed registration unresolved.
- Architectural geometry and installed quantities are not established; model unchecked.
Inspect this object’s readings →View source IMG_1335 ↗
assembly · detail-floor4-electrical-junction-reference-1335Modeling: not-modeled
Fourth-floor elevator lighting junction-box reference
Research representation: none. Architectural checks: pending.
Fourth floor
3 recorded properties
Still to extract or check- Remaining individual dimensions, service instances, fine callouts and routes require source review.
- Original/revised annotations, companion sheets and installed registration unresolved.
- Architectural geometry and installed quantities are not established; model unchecked.
Inspect this object’s readings →View source IMG_1335 ↗
assembly · lighting1013d-img1335-room405-two-stationsModeling: not-modeled
Printed room405 bounded two-station row
Research representation: none. Architectural checks: pending.
Fourth floor
2 recorded properties
Still to extract or check- Governing luminaire symbol/P-type key and type-to-instance mapping
- Fixture material, finish and dimensional envelope
- Mounting/anchor height, station spacing and checked architectural-room/source transform
- Governing revision, installed quantity and as-built correspondence
- Other sheet regions, notes, exceptions and companion details remain unreviewed
Inspect this object’s readings →View source IMG_1335 ↗
fixture · lighting1013d-img1335-room405-two-stations-station-01Modeling: not-modeled
Printed room405 bounded two-station row, drawn station 1
Research representation: none. Architectural checks: pending.
Fourth floor
3 recorded properties · Room assignment not established
Still to extract or check- Governing luminaire symbol/P-type key and type-to-instance mapping
- Fixture material, finish and dimensional envelope
- Mounting/anchor height, station spacing and checked architectural-room/source transform
- Governing revision, installed quantity and as-built correspondence
- Other sheet regions, notes, exceptions and companion details remain unreviewed
Inspect this object’s readings →View source IMG_1335 ↗
fixture · lighting1013d-img1335-room405-two-stations-station-02Modeling: not-modeled
Printed room405 bounded two-station row, drawn station 2
Research representation: none. Architectural checks: pending.
Fourth floor
3 recorded properties · Room assignment not established
Still to extract or check- Governing luminaire symbol/P-type key and type-to-instance mapping
- Fixture material, finish and dimensional envelope
- Mounting/anchor height, station spacing and checked architectural-room/source transform
- Governing revision, installed quantity and as-built correspondence
- Other sheet regions, notes, exceptions and companion details remain unreviewed
Inspect this object’s readings →View source IMG_1335 ↗