IMG_1317 · Folder 1864th & 5th Floor Framing Plan — outside wall beams
Sheet W403
Extraction: Reviewed · extraction partial. Bounded outside-wall sectional face offsets only. Bounded wall-section sufficiency audit for the fourth-floor middle Broadway span family. Bounded architectural wall-chain search; applicability reviewed, whole sheet not extracted. Text-first physical-pilot gate 3 audit; existing reviewed plan, elevation and section records reused without reopening an archival image. Page-right 4/11 metric/cardinal conflict audit; targeted source region Broadway C58–C52 fourth-floor shell physical-bounds gate; control frame only. Broadway C58–C52 fourth-floor shell physical-bounds gate; control frame only. Broadway C58–C52 fourth-floor shell physical-bounds gate; control frame only. Broadway C58–C52 fourth-floor shell physical-bounds gate; control frame only. Broadway C58–C52 fourth-floor shell physical-bounds gate; control frame only. Broadway C58–C52 fourth-floor shell physical-bounds gate; control frame only. Broadway C58–C52 fourth-floor shell physical-bounds gate; control frame only. Broadway C58–C52 fourth-floor shell physical-bounds gate; control frame only. Broadway C58–C52 fourth-floor shell physical-bounds gate; control frame only. Broadway C58–C52 fourth-floor shell physical-bounds gate; control frame only. Partial timed visual review: Bounded source-reading review only; no full-source or geometry acceptance. Partial timed visual review: New bounded printed-note review; full-source completeness not established. Partial timed visual review: Existing wall-section dimension controls and floor datums reused; cross-sheet relationship retained without duplicating verified controls. Partial timed visual review: Targeted source detail only. Master orientation recorded independently from access derivatives. Region bounds are crop locators, not physical geometry. Partial timed visual review: undefined Partial timed visual review: undefined
Highlighted reading: FLOOR FILL 4″. Printed general floor-fill requirement; exceptions and finishes not transferred to room geometry.
Show every recorded property on this drawing →
Unresolved extraction work
- Remaining details and notes
- Vertical stone-face continuation and local projections
- Full wall construction thickness
- Architectural reveal/window sections
- wall.interiorBoundaryFace: missing
- wall.overallExteriorToInteriorThickness: missing
- wall.stoneLayerThickness: missing
- wall.stoneTypeAndFinish: missing
- wall.bedMortarCavityOrAttachmentLayer: missing
- wall.backingMaterialAndThickness: missing
- wall.interiorSubstrateAndFinishLayers: missing
- wall.layerInterfaces: missing
- wall.verticalExtentOfSectionAssemblyAtLevel4: missing
- wall.continuousBayConditionAwayFromFloorBeamEncasement: missing
- wall.specificBayOrRoomApplicability: missing-for-placement
- classified interior finish-face location in the same W207/W403 section reference system
- printed or independently controlled total perpendicular exterior-to-interior wall thickness
- stone, backup, air space, waterproofing and room-side finish layer thicknesses with continuous endpoints
- fourth-floor middle-bay applicability of each W207 local jamb/return condition
- source-picked W-6 room-side face to W403 stone-face registration and independent check
- masonry, frame, sash and clear-opening boundary reconciliation
- complete W207/W208 callout, note and companion-detail coverage
- A W-6-to-world registration solved from classified, source-picked controls with held-out plan residuals.
- A page-right/west/Broadway W-6 chain with exact grid/column identifiers and a resolved end-chain transition.
- A direct plan key tying one W-6 room/opening instance to opening-broadway-F4-B05/broadway-bay-05.
- A face bridge from the W-6 room-side exterior-wall trace to W403's exterior FACE OF STONE, without assuming wall thickness.
- A classification of the IMG_1231 visible opening envelope as the same jamb/masonry/frame boundary measured by W-6.
- One held-out horizontal plan/elevation control with independently known station and comparable endpoints; report its residual and tolerance.
- Review acceptance of the B05 elevation envelope host and station origin; acceptedHostElementId and acceptedStationFeet must become non-null.
- Independently decode IMG_1231 fourth-floor opening keys at both B02 and B09 and the relevant W207 orientation/detail mark.
- Read the W-6 grid names bounding Room 421/4/11, with source-picked axes and a withheld same-class plan/elevation station check.
- Classify exact plan and elevation opening edges as masonry, finished jamb, frame, sash or clear aperture before comparing width residuals.
- Tie the W403 outside FACE OF STONE section to the corrected bay and obtain the opposing interior face and complete layer chain.
- same-condition exterior stone to classified interior finish face depth and every intervening layer/material
- architecturally classified north/south wall ends, joints and pier returns rather than support-axis stations
- physical wall base/top and slab-edge interfaces rather than finished-floor schedule datums
- independently checked W-6 to Broadway elevation horizontal registration and B05 key/host identity
- masonry versus visible/frame/clear opening bounds, sill, head, jamb returns and reveal depth
- W403 stone-face continuity away from the floor-beam section and across the 14-foot span
- framingcells1013m-img1317-002-anchor_note_fraction is assigned to lower single-beam object, but upper bolt notes belong to two separate double-beam sections. Fraction and pitch not safely resolved; no same-scope closure or physical anchor assignment.
- Complete source-to-instance registration, physical endpoints and installed quantities remain unresolved.
- Unreviewed sheet regions, fine notes, schedules, companion applicability and revision authority remain open.
- No world coordinates, member cut lengths, steel grades, physical wall geometry or architectural acceptance established.
- Upper bolt fraction/pitch remains unreadable and has unresolved assignment between double-beam and lower single-beam scopes. New light-court reference does not close that question or wall layer/inside-face geometry.
- Installed instance allocation, quantities and source-to-building registration remain unresolved.
- All remaining dimensions, profiles, joints, finishes and companion/revision applicability need review.
- No accepted physical geometry or whole-source completeness established.
- All remaining small dimension chains and endpoint classifications
- Complete profiles, quantities and installation registration
- Companion details and original/revision reconciliation
- Independent geometry/model check and as-built correspondence
- Remaining dimension endpoints and layer/material assignments not yet reviewed
- Installed instances, quantities and plan/elevation registration unresolved
- Companion details and revisions require reconciliation
- Independent model/as-built checks unavailable in this extraction
- Upper anchoring note diameter/fraction and pitch not safely readable in this crop.
- Whole wall thickness, interior wall face and complete finish layer chain remain unresolved.
- Other sheet regions, fine notes, schedules, callouts and revisions remain unreviewed.
- Complete source-to-instance registration, connection capacities, material grades and independent model/as-built checks remain pending.
- Installed angle quantities and individual bay lengths not extracted
- Material specification and fastening not established by these notes
- Remaining framing marks, schedules, revisions and companion slab sheet W-413 require review
- Source-to-model and as-built checks remain pending
Download OCR observations (unverified)