← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs: 464
Identified objects: 4872
Verified printed values: 12046
Disputed values: 20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

IMG_1301 · Folder 187

DETAILS OF ORNAMENTAL METALWORK

Sheet W-213

Extraction: Reviewed · extraction partial. Flagpole base elevation and plan; tapered pole note; revolving-truck material notes; bronze-eagle identity, handedness, and orientation note. W-213 twelve-inch bronze ball isolated outside-envelope type; tighter note region remains to repick. Partial timed visual review: undefined Partial timed visual review: Exterior Model 8 pole-base and revolving-truck type component notes. No indoor ROOM FLAG STAFFS, grille/rail fork or Model 72 eagle dimensions imported. Source-local specifications only. Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: Source-local regional inventory and bounded companion findings; architecture and exhaustive extraction unapproved. Partial timed visual review: END-view fabrication evidence only. The two upper extension lines pass through member axes; the middle extension passes through the baluster axis. Pole overall height is not established.

Unresolved extraction work

Overall flagpole height and shaft length
Complete dimensioned base envelope and ornamental profiles
Base anchorage, foundation, internal pipe, and drainage
Exact truck assembly dimensions and all bearing sizes
Eagle wingspan, depth, attachment dimensions, and calibrated profile
Flag, halyard, cleat, and rope dimensions not securely legible in this pass
World coordinates of both Main Street flagpole axes
As-built correspondence
Remaining W-213 grille and pipe-rail regions outside this bounded question
Whether cast, sheet or hollow and the shell thickness
Mounting socket, bore and attachment to the revolving truck
Ornamental surface or seams, if any
Revolving-truck height and both flagpole building transforms
Model11 already verified by lobbyinventory1013l-1301-upper-grille-model-mark; remaining installation registration is not a mark-reading question and is not closed.
Remaining uninspected notes, dimensions, schedules, details and companion sheets require separate review.
Original versus revision authority, installed instance correspondence and source-to-building registration remain unresolved.
No closed physical profile or architectural/model acceptance established.
Pole full height/shaft length and both exterior world axes remain unresolved
Base foundation/anchorage and complete envelope
Eagle dimensions and attachment; indoor room flagstaffs remain distinct
Truck/rope full profiles, lengths, quantities and installation correspondence
Remaining sheet regions/revisions not exhaustively reviewed
Unmeasured curve radii, moulding endpoints and closed physical profiles remain null; photographic tracing is not a dimension.
Original versus revision authority, installed quantities and source-to-room/bay registration remain unresolved.
Companion details, fixing schedules, actual installed finishes and as-built correspondence remain open.
Model 11 already verified; installed grille registration remains distinct. No evidence for full pole height, complete base or axes.
Remaining dimensions, fine fractions, notes, schedules and companion details are not exhaustively extracted.
Installed quantities, accepted room/bay placement and source-to-building registration remain unresolved.
Original/revision authority, actual finish and physical profile applicability remain unresolved; modeling/checking unchecked.
Remaining fine dimension fractions and witness endpoint classes require targeted master crops; standard inventory does not certify exhaustive extraction.
All notes, material-code keys, schedules, approval/date/revision fields and companion references need complete transcription and reconciliation.
Exact installed quantities, room/bay placement, source-to-building registration, physical layer/profiles and as-built correspondence remain unresolved.
Pole full length
Rail full profiles and instance inventory
Remaining W213 notes, grilles, pipe rails and revisions

Download OCR observations (unverified)

Loading the selected drawing…

Scroll or pinch to inspect this drawing. Archival drawing photograph · Oregon Historical Society research collections.

Open source image separately ↗

52 matching properties

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

main-north-flagpole-w213-model-8-base-typeverified · printed

Printed model number

MODEL NO. 8

Printed within the flagpole-base elevation.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-w213-assembly-typeverified · printed

Outside pole diameter at bottom

9 7/8"

9.875 in

Printed shaft note; applies to the pole, not the ornamental base envelope.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-w213-assembly-typeverified · printed

Outside pole diameter at top

4 in

Printed shaft note.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-w213-assembly-typeverified · printed

Pole taper

CONTINUOUS TAPER WITH ENTASIS

The sheet states the taper concept but gives no full pole length or entasis curve.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-w213-assembly-typeverified · printed

Pole material

COPPER-BEARING STEEL

Printed shaft material.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-w213-model-8-base-typeverified · printed

Flagpole base material

BRONZE

Vertical material label beside the ornamental base elevation.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-w213-model-8-base-typeverified · printed

Star ornament finish

BRONZE STARS HIGHLIGHTED & POLISHED

Applies to the star band on the ornamental base.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-w213-revolving-truck-typeverified · printed

Bronze ball diameter

12" BRONZE BALL

12 in

Printed revolving-truck note; the connected spread eagle is separately identified.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-w213-model-72-eagle-typeverified · printed

Printed model number

MODEL NO. 72

Printed beside the Main flagpole eagle elevation.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-w213-model-72-eagle-typeverified · printed

Eagle material

BRONZE

The detail title reads BRONZE EAGLES ON MAIN FLAG POLES.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-w213-model-72-eagle-typeverified · printed

Main flagpole eagle count

2 · one on each Main flagpole

2 count

The note distinguishes the pair and requires opposite-handed casts.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-w213-model-72-eagle-typeverified · printed

Pair handedness

CAST TO OPPOSITE HAND FROM EACH OTHER

A mirrored pair is required; the page-left/page-right assignment remains unresolved without plan placement.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-w213-model-72-eagle-typeverified · printed

Installed facing

EACH ONE TO FACE TOWARDS CENTER OF BUILDING

This supplies a relational orientation only after the two flagpole axes are placed.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-w213-assembly-typeunreviewed · observed

Overall pole height

Unresolved

Numeric value unresolved

No securely printed full pole height was found in the bounded W-213 regions.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-w213-model-8-base-typeunreviewed · observed

Complete base envelope

Unresolved · scale drawing only

Numeric value unresolved

Do not scale the oblique photograph into physical dimensions without rectification and independent controls.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-w213-model-72-eagle-typeunreviewed · observed

Eagle wingspan

Unresolved · scale drawing only

Numeric value unresolved

No printed wingspan was identified; the photographed scale graphic is not treated as a measurement.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-page-leftunreviewed · observed

World flagpole axis

Unresolved

W-213 is a fabrication sheet. W3 circular exterior pockets are unlabeled and are not silently reclassified as flagpoles.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-page-rightunreviewed · observed

World flagpole axis

Unresolved

W-213 is a fabrication sheet. A labeled plan or registered chain is required.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: FLAGPOLE BASE; OUTSIDE POLE DIAMETER AT BOTTOM 9 7/8" — AT TOP 4"; CONTINUOUS TAPER WITH ENTASIS; BRONZE EAGLES ON MAIN FLAG POLES

W-213 local flagpole fabrication evidence only; no world insertion is established.

main-north-flagpole-w213-bronze-ball-typeverified · printed

material

BRONZE BALL

Nominal outside-surface component only; no hollow/solid fabrication, revolving-truck attachment or building placement is established.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: 12" BRONZE BALL

Reuse of the previously verified W-213 flagpole extraction; note-region repick remains outstanding.

main-north-flagpole-w213-bronze-ball-typeverified · derived

nominalOutsideRadius

12" BRONZE BALL

0.5 ft

Nominal outside-surface component only; no hollow/solid fabrication, revolving-truck attachment or building placement is established.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: 12" BRONZE BALL

Reuse of the previously verified W-213 flagpole extraction; note-region repick remains outstanding.

Calculated from: main-north-w213-truck-ball-diameter

main-north-flagpole-w213-bronze-ball-typeunreviewed · inferred

shellThickness

Unresolved

Numeric value unresolved

Nominal outside-surface component only; no hollow/solid fabrication, revolving-truck attachment or building placement is established.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: 12" BRONZE BALL

Reuse of the previously verified W-213 flagpole extraction; note-region repick remains outstanding.

main-north-flagpole-w213-bronze-ball-typeunreviewed · inferred

mountingBoreDiameter

Unresolved

Numeric value unresolved

Nominal outside-surface component only; no hollow/solid fabrication, revolving-truck attachment or building placement is established.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: 12" BRONZE BALL

Reuse of the previously verified W-213 flagpole extraction; note-region repick remains outstanding.

main-north-flagpole-w213-bronze-ball-typeunreviewed · inferred

acceptedTruckLocalCenter

Unresolved

Numeric value unresolved

Nominal outside-surface component only; no hollow/solid fabrication, revolving-truck attachment or building placement is established.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: 12" BRONZE BALL

Reuse of the previously verified W-213 flagpole extraction; note-region repick remains outstanding.

main-north-flagpole-w213-bronze-ball-typeunreviewed · inferred

acceptedBuildingCenter

Unresolved

Numeric value unresolved

Nominal outside-surface component only; no hollow/solid fabrication, revolving-truck attachment or building placement is established.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: 12" BRONZE BALL

Reuse of the previously verified W-213 flagpole extraction; note-region repick remains outstanding.

main-north-flagpole-w213-model-8-base-typeverified · printed

upper_base_collar_pole_connection

CHAMFERED EDGE OF BRONZE COLLAR / CAULKED DIRECTLY TO POLE

Leader at upper edge of Model 8 bronze collar. Connection requirement only; no chamfer size, sealant material, anchorage force, foundation or world axis established.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: CHAMFERED EDGE OF BRONZE COLLAR / CAULKED DIRECTLY TO POLE

Leader at upper edge of Model 8 bronze collar. Connection requirement only; no chamfer size, sealant material, anchorage force, foundation or world axis established.

main-north-flagpole-w213-model-8-base-typeverified · printed

ornament_applicability_side_count

THIS ORNAMENT / ON TWO SIDES

2 count

Leader points to sword/wreath relief panel within the Model 8 base. Two ornament-bearing sides per depicted type, not two bases/poles, eagle count, total cleat count or a mirrored world-side mapping.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: THIS ORNAMENT / ON TWO SIDES

Leader points to sword/wreath relief panel within the Model 8 base. Two ornament-bearing sides per depicted type, not two bases/poles, eagle count, total cleat count or a mirrored world-side mapping.

flagprofile1013g-w213-halyard-cleat-typeverified · printed

cleat_nominal_size_annotation

WROUGHT BRONZE / HALYARD CLEATS — 9"

9 in

9-inch token is adjacent to the leader naming wrought-bronze halyard cleats. Treat as nominal cleat size; there is no secure pair of measured endpoint witnesses for a full manufactured length or projection, and no installed count/station is established.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: WROUGHT BRONZE / HALYARD CLEATS — 9"

flagprofile1013g-w213-halyard-cleat-typeverified · printed

cleat_material_fabrication

WROUGHT BRONZE HALYARD CLEATS

Exterior Model 8 base cleat material/fabrication annotation; corroborates the separate full-size companion wording. Does not assign bronze to unresolved flute alloy or indoor room flagstaff fixtures.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: WROUGHT BRONZE HALYARD CLEATS

Exterior Model 8 base cleat material/fabrication annotation; corroborates the separate full-size companion wording. Does not assign bronze to unresolved flute alloy or indoor room flagstaff fixtures.

flagprofile1013g-w213-truck-spiral-typeverified · printed

spiral_diameter

3/4" φ BRONZE SPIRAL

0.75 in

Truck-note bronze spiral diameter, not bronze-ball bore, shell thickness, king-pin diameter or pole anchorage bolt.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: 3/4" φ BRONZE SPIRAL

Truck-note bronze spiral diameter, not bronze-ball bore, shell thickness, king-pin diameter or pole anchorage bolt.

flagprofile1013g-w213-truck-spiral-typeverified · printed

spiral_material

BRONZE SPIRAL

Material of truck spiral only. Not a specification of the pole shaft, which independently remains copper-bearing steel.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: BRONZE SPIRAL

Material of truck spiral only. Not a specification of the pole shaft, which independently remains copper-bearing steel.

flagprofile1013g-w213-truck-spiral-typeverified · printed

spiral_king_pin_connection

SCREWED INTO KING PIN OF TRUCK

Connection clause of 12-inch bronze-ball/spread-eagle truck note; establishes a threaded relationship, not thread pitch, king-pin dimensions or ball mounting-bore diameter.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: SCREWED INTO KING PIN OF TRUCK

Connection clause of 12-inch bronze-ball/spread-eagle truck note; establishes a threaded relationship, not thread pitch, king-pin dimensions or ball mounting-bore diameter.

flagprofile1013g-w213-truck-sheave-typeverified · printed

sheave_diameter

4" φ BRONZE SHEAVES

4 in

Nominal sheave diameter in revolving truck. Separate from independently printed four-inch top pole outside diameter; no sheave count or groove width specified by this property.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: 4" φ BRONZE SHEAVES

Nominal sheave diameter in revolving truck. Separate from independently printed four-inch top pole outside diameter; no sheave count or groove width specified by this property.

flagprofile1013g-w213-truck-sheave-typeverified · printed

sheave_material

BRONZE SHEAVES

Material of truck sheave type only.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: BRONZE SHEAVES

Material of truck sheave type only.

flagprofile1013g-w213-truck-roller-bearing-typeverified · printed

roller_bearing_material

BRONZE / ROLLER BEARINGS

Truck note names bronze roller bearings with sheaves. Bearing size/number and contact geometry remain unresolved.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: BRONZE / ROLLER BEARINGS

Truck note names bronze roller bearings with sheaves. Bearing size/number and contact geometry remain unresolved.

flagprofile1013g-w213-truck-pin-typeverified · printed

pin_material

MONEL METAL PINS

Truck sheave/bearing pin material; alloy grade, count, diameter and length not specified in this property.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: MONEL METAL PINS

Truck sheave/bearing pin material; alloy grade, count, diameter and length not specified in this property.

flagprofile1013g-w213-truck-ball-bearing-typeverified · printed

ball_bearing_material_annotation

MANGANESE BRONZE BALL BEARINGS

Literal ball-bearing material clause. Do not reassign manganese bronze to roller bearings, twelve-inch ornamental bronze ball or the separate housing/petticoat clause.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: MANGANESE BRONZE BALL BEARINGS

Literal ball-bearing material clause. Do not reassign manganese bronze to roller bearings, twelve-inch ornamental bronze ball or the separate housing/petticoat clause.

flagprofile1013g-w213-truck-housing-petticoat-typeverified · printed

housing_petticoat_material_annotation

HOUSING PETTYCOAT OF BRONZE:

Preserve the source's HOUSING PETTYCOAT wording as one unresolved component boundary; it specifies bronze. No separate housing-versus-petticoat geometry, thickness or manganese-bronze assignment inferred.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: HOUSING PETTYCOAT OF BRONZE:

flagprofile1013g-w213-halyard-typeverified · printed

halyard_count_per_truck_specification

TWO HALYARDS

2 count

Two halyards specified for the depicted exterior truck type. Type-component quantity only, not installed pole count, two flagstaff fixtures indoors or whole-building rope inventory.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: TWO HALYARDS

Two halyards specified for the depicted exterior truck type. Type-component quantity only, not installed pole count, two flagstaff fixtures indoors or whole-building rope inventory.

flagprofile1013g-w213-halyard-typeverified · printed

halyard_rope_diameter

5/8" φ

0.625 in

Diameter of the specified exterior truck Manila bolt-rope halyard; not bronze spiral diameter, nominal pipe size, rope length or hollow pole wall thickness.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: 5/8" φ

Diameter of the specified exterior truck Manila bolt-rope halyard; not bronze spiral diameter, nominal pipe size, rope length or hollow pole wall thickness.

flagprofile1013g-w213-halyard-typeverified · printed

halyard_material_fibre_grade

EXTRA / LONG FIBRE MANILA BOLT ROPE

Literal halyard material/grade wording. Extra long qualifies fibre, not a numeric rope length or pole height.

IMG_1301 · sheet-W213 · Locate on drawing ↗

Drawing notation: EXTRA / LONG FIBRE MANILA BOLT ROPE

Literal halyard material/grade wording. Extra long qualifies fibre, not a numeric rope length or pole height.

View all source photographs →