facade-mainverified · observed
main-volume opening envelope count
54 observed opening envelopes54 count
IMG_1230 · Locate on drawing ↗
Nine each at F1–F5 and nine continuous F6–F7 envelopes; excludes rooftop and component subpanels.
The measured building.
Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.
- Source photographs
- 464
- Identified objects
- 4872
- Verified printed values
- 12046
- Disputed values
- 20
464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.
Download the structured register (JSON)IMG_1230 · Folder 190
Longitudinal building section
Original sheet identity has not yet been reconciled.
Extraction: Reviewed · extraction partial. Full-view façade inventory and one lower-entrance crop;54 envelopes and9bays, trace regions only. Partial timed visual review: Text-only prior evidence inventory; catalogue labels are discovery-only and prior verified identity retained. Partial timed visual review: Source-local architectural evidence only; no physical registration, installed quantity or accepted geometry. Existing verified measurements omitted; conflicting locator readings preserved.
Highlighted reading: 54 observed opening envelopes. Nine each at F1–F5 and nine continuous F6–F7 envelopes; excludes rooftop and component subpanels.
Show every recorded property on this drawing →
Unresolved extraction work
- Printed sheet number
- Physical bay/width chain
- Opening widths/sills/heads
- Upper circular marks
- End-pier letter/ornament dimensions
- Retaining/stair/grade geometry
- Rooftop assemblies
- Companion entrance details
- Finished/rough/structural boundary classes and physical source-to-plan registration remain unaccepted.
- Remaining fine dimensions, all material/finish schedules, notes and historical revisions need regional and companion review.
- No installed quantity, geometry, as-built state or architectural release is accepted.
- Rooftop assembly dimensions, individual upper marks and roof material/section companions
- Width/station/sill/head and rough/frame/clear-edge control
- All grade witnesses, stairs, balustrades and entry material/detail controls
- Printed sheet number and historical revision/approval annotations
- Exact dimensions and witness endpoints not fully extracted
- Companion-detail, revision and floor/room registration unresolved
- All-region review and modeling acceptance incomplete
Loading the selected drawing…
Scroll or pinch to inspect this drawing. The gold outline locates the selected reading. Archival drawing photograph · Oregon Historical Society research collections.
Open source image separately ↗1 matching properties
Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.