IMG_1221 · Folder 190Seventh Floor Plan
Original sheet identity has not yet been reconciled.
Extraction: Reviewed · extraction partial. Coarse room, court, shaft, stair and visible-door topology with independent provisional registration. 31nominal rooms/circulation regions,4shafts (3elevators plus steel stack),8stair envelopes and27selected openings. Seventh-floor outer trace reused only as a parent of the analytical registration curtain. Reused the provisional level-7 Stair E plan envelope and independently read DOWN 22 / UP 20 labels as cross-floor diagnostic inputs. Existing seventh-floor plan room-number evidence reused for cross-source identity correlation. Bounded W-235 to seventh-floor-plan registration gate; component identities remain valid while all source-to-building placements are withheld. Partial timed visual review: Existing appeals audit reused; no image reopened and no duplicate platform records. Partial timed visual review: Sequential full derivative and targeted Court717/716 crop review. Additive source-local relationship verification; existing room dimensions, traced polygons and printed levels are retained without duplication. Geographic directions derive from IMG_1222 compass. No accepted geometry changed. Partial timed visual review: Additional source-local room identity and dimension endpoint review only; no geometry acceptance. Partial timed visual review: Text-only reuse checkpoint; no image reopened. Prior evidence and unresolved work retained. Partial timed visual review: Seventh-floor F/G terminal host sides and west regional short-flight direction. Upright master is raw rotated90° clockwise; access file already upright. Partial timed visual review: Selected source questions and verified prior property crosswalk only; no exhaustive region or source completion claimed. Partial timed visual review: Full architectural region inventory by existing object/property sources, with explicit pending work. Reused bounding regions do not certify exhaustive visual coverage.
Highlighted reading: 47.368 ft (trace). Coarse manual trace on upright master; coordinates are provisional.
Show every recorded property on this drawing →
Show coordinated geometry overlay →
Registration: provisional · 4 independent checks · maximum residual 1.312 ft.
Unresolved extraction work
- Every note and dimension has not been transcribed
- Exact wall thicknesses and construction layers
- All doors and hardware schedules
- Small closets/services and fixture instances
- Ceiling relief, clear heights and local raised floors
- Original title-block revisions
- Companion room/stair details
- Precise floor openings and overlay checks
- Plan source capture includes3full views including rejectedIMG_1214;8targeted crops total, as parent-approved.
- No architectural-completeness percentage is claimed.
- Regional vertical transitions, exact outside wall face, wall thickness, openings and local facade projections
- Accepted wall faces
- Exact stair opening
- Held-out registration checks
- Two-riser landing applicability
- W-235-to-IMG_1221 registration and accepted local/world transform
- Exact finished-face polygons for Rooms 720 and 721
- All room overall dimensions and ceiling heights
- Secure printed type labels for every unlabeled fixture symbol
- Fixture dimensions, manufacturers, elevations and rough-in offsets
- Compartment construction, heights, doors and hardware
- Room-entry door sizes, jambs, leaf counts, types and hardware
- Finish No. 4 and Finish No. 6 material schedule decoding
- Supply, waste, vent, floor-drain and cleanout connections
- Exact window assembly instances for the full-size toilet street-front frame detail
- All section dimensions, finish layers and material-code references
- Revision, date and approval history
- Accepted like-for-like endpoint classification on W-235 and IMG_1221: finish face, structural face or centerline
- At least four independently recognizable controls distributed around the complete 720/721 block with reviewed point coordinates
- At least two held-out controls with residuals within the adopted tolerance
- Rectified or orthogonally scanned W-235 source, or a registered dimension network sufficient to avoid photographed line scaling
- Accepted seventh-floor finished-face polygons for Rooms 720 and 721
- Accepted Elevator No.1 shaft-face or clear-hatch geometry usable as an independent asymmetrical check
- Printed offsets locating each fixture and partition from classified room faces
- Remaining dimensions and endpoint classification
- Materials, schedules and companion details not yet completely reconciled
- Accepted source registration and geometry checking
- Full dimension/finish-face extraction
- Details240/241 bench plan and sections
- Platform last elevation digit
- All outstanding source queue properties
- Closed boundary and exact finish/rough/structural face classification
- Opening size, head/sill level, hardware and schedule correlation
- Companion details and installed/revised state
- Accepted source-to-building registration
- Remaining fine dimensions, notes, schedules and callouts require targeted full-resolution crops
- Closed geometry and finish/rough/structural endpoint classification
- Complete quantities, schedules, companion details and revision reconciliation
- Accepted source registration and held-out geometry checks
- Court717 platform last elevation digit remains null; no duplicate reading
- Accepted source-to-building transform and like-for-like finished/rough/structural face classification
- Exact closed slab opening, landing perimeter and headroom
- Construction/rail/nosing detail and revision/as-built reconciliation
- All remaining unreviewed regions, notes, schedules and companion details
- Exact finish/rough/structural endpoints and closed physical boundaries remain unresolved.
- Complete opening/fixture quantities, schedules, companion details and historical revision authority remain unresolved.
- Source registration, installed condition, clear heights and held-out geometry checks remain unaccepted.
- All other unrecorded regions, fine dimensions, notes and callouts require further review.
- Explicit datum unit convention or same-sheet legend establishing feet.
- Absolute benchmark/conversion and physical platform applicability.
- Bench/platform, riser/tread and detail240/241 registration.
- All door numeric heights, widths and sills still unresolved. Court602/612 upper voids are not new seventh-floor occupied slabs. Stair upward-continuation/destination and accepted transforms remain open.
- All remaining fine dimensions, notes, callouts, schedules and revision authority need regional review.
- Accepted finished/rough/structural faces, material extents and closed physical bounds remain unresolved.
- Source registration, held-out checks, companion applicability and installed quantities remain unaccepted.
- Known topology/terminal stairs/court voids/ceiling doors reused without reopening. No new transform, slab or ascent accepted.
Download OCR observations (unverified)