Gus J. SolomonUnited States Courthouse
MenuClose
← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs
464
Identified objects
4872
Verified printed values
12046
Disputed values
20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

Clear filters
IMG_1221 · Folder 190

Seventh Floor Plan

Original sheet identity has not yet been reconciled.

Extraction: Reviewed · extraction partial. Coarse room, court, shaft, stair and visible-door topology with independent provisional registration. 31nominal rooms/circulation regions,4shafts (3elevators plus steel stack),8stair envelopes and27selected openings. Seventh-floor outer trace reused only as a parent of the analytical registration curtain. Reused the provisional level-7 Stair E plan envelope and independently read DOWN 22 / UP 20 labels as cross-floor diagnostic inputs. Existing seventh-floor plan room-number evidence reused for cross-source identity correlation. Bounded W-235 to seventh-floor-plan registration gate; component identities remain valid while all source-to-building placements are withheld. Partial timed visual review: Existing appeals audit reused; no image reopened and no duplicate platform records. Partial timed visual review: Sequential full derivative and targeted Court717/716 crop review. Additive source-local relationship verification; existing room dimensions, traced polygons and printed levels are retained without duplication. Geographic directions derive from IMG_1222 compass. No accepted geometry changed. Partial timed visual review: Additional source-local room identity and dimension endpoint review only; no geometry acceptance. Partial timed visual review: Text-only reuse checkpoint; no image reopened. Prior evidence and unresolved work retained. Partial timed visual review: Seventh-floor F/G terminal host sides and west regional short-flight direction. Upright master is raw rotated90° clockwise; access file already upright. Partial timed visual review: Selected source questions and verified prior property crosswalk only; no exhaustive region or source completion claimed. Partial timed visual review: Full architectural region inventory by existing object/property sources, with explicit pending work. Reused bounding regions do not certify exhaustive visual coverage.

Hide coordinated geometry overlay →
Registration: provisional · 4 independent checks · maximum residual 1.312 ft.

Unresolved extraction work
  • Every note and dimension has not been transcribed
  • Exact wall thicknesses and construction layers
  • All doors and hardware schedules
  • Small closets/services and fixture instances
  • Ceiling relief, clear heights and local raised floors
  • Original title-block revisions
  • Companion room/stair details
  • Precise floor openings and overlay checks
  • Plan source capture includes3full views including rejectedIMG_1214;8targeted crops total, as parent-approved.
  • No architectural-completeness percentage is claimed.
  • Regional vertical transitions, exact outside wall face, wall thickness, openings and local facade projections
  • Accepted wall faces
  • Exact stair opening
  • Held-out registration checks
  • Two-riser landing applicability
  • W-235-to-IMG_1221 registration and accepted local/world transform
  • Exact finished-face polygons for Rooms 720 and 721
  • All room overall dimensions and ceiling heights
  • Secure printed type labels for every unlabeled fixture symbol
  • Fixture dimensions, manufacturers, elevations and rough-in offsets
  • Compartment construction, heights, doors and hardware
  • Room-entry door sizes, jambs, leaf counts, types and hardware
  • Finish No. 4 and Finish No. 6 material schedule decoding
  • Supply, waste, vent, floor-drain and cleanout connections
  • Exact window assembly instances for the full-size toilet street-front frame detail
  • All section dimensions, finish layers and material-code references
  • Revision, date and approval history
  • Accepted like-for-like endpoint classification on W-235 and IMG_1221: finish face, structural face or centerline
  • At least four independently recognizable controls distributed around the complete 720/721 block with reviewed point coordinates
  • At least two held-out controls with residuals within the adopted tolerance
  • Rectified or orthogonally scanned W-235 source, or a registered dimension network sufficient to avoid photographed line scaling
  • Accepted seventh-floor finished-face polygons for Rooms 720 and 721
  • Accepted Elevator No.1 shaft-face or clear-hatch geometry usable as an independent asymmetrical check
  • Printed offsets locating each fixture and partition from classified room faces
  • Remaining dimensions and endpoint classification
  • Materials, schedules and companion details not yet completely reconciled
  • Accepted source registration and geometry checking
  • Full dimension/finish-face extraction
  • Details240/241 bench plan and sections
  • Platform last elevation digit
  • All outstanding source queue properties
  • Closed boundary and exact finish/rough/structural face classification
  • Opening size, head/sill level, hardware and schedule correlation
  • Companion details and installed/revised state
  • Accepted source-to-building registration
  • Remaining fine dimensions, notes, schedules and callouts require targeted full-resolution crops
  • Closed geometry and finish/rough/structural endpoint classification
  • Complete quantities, schedules, companion details and revision reconciliation
  • Accepted source registration and held-out geometry checks
  • Court717 platform last elevation digit remains null; no duplicate reading
  • Accepted source-to-building transform and like-for-like finished/rough/structural face classification
  • Exact closed slab opening, landing perimeter and headroom
  • Construction/rail/nosing detail and revision/as-built reconciliation
  • All remaining unreviewed regions, notes, schedules and companion details
  • Exact finish/rough/structural endpoints and closed physical boundaries remain unresolved.
  • Complete opening/fixture quantities, schedules, companion details and historical revision authority remain unresolved.
  • Source registration, installed condition, clear heights and held-out geometry checks remain unaccepted.
  • All other unrecorded regions, fine dimensions, notes and callouts require further review.
  • Explicit datum unit convention or same-sheet legend establishing feet.
  • Absolute benchmark/conversion and physical platform applicability.
  • Bench/platform, riser/tread and detail240/241 registration.
  • All door numeric heights, widths and sills still unresolved. Court602/612 upper voids are not new seventh-floor occupied slabs. Stair upward-continuation/destination and accepted transforms remain open.
  • All remaining fine dimensions, notes, callouts, schedules and revision authority need regional review.
  • Accepted finished/rough/structural faces, material extents and closed physical bounds remain unresolved.
  • Source registration, held-out checks, companion applicability and installed quantities remain unaccepted.
  • Known topology/terminal stairs/court voids/ceiling doors reused without reopening. No new transform, slab or ascent accepted.

Download OCR observations (unverified)

Loading the selected drawing…

Scroll or pinch to inspect this drawing. Blue: printed controls. Gold: provisional geometry. Pink: held-out check residuals. An overlay is a comparison, not certification. Archival drawing photograph · Oregon Historical Society research collections.

Open source image separately ↗

1080 matching properties

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

f7-vault-southunreviewed · traced

Registered footprint trace

6 boundary vertices; provisional, ±3.25 ft

Bounded region associated with the corresponding printed Main/Madison floor control.

IMG_1221 · Locate on drawing ↗

Drawing notation: VAULT

Coarse manual trace on upright master; coordinates are provisional.

f7-vault-northeastunreviewed · traced

Registered footprint trace

4 boundary vertices; provisional, ±3.25 ft

Bounded region associated with the corresponding printed Main/Madison floor control.

IMG_1221 · Locate on drawing ↗

Drawing notation: VAULT

Coarse manual trace on upright master; coordinates are provisional.

f7-corridor-southunreviewed · traced

Registered footprint trace

6 boundary vertices; provisional, ±3.25 ft

Bounded region associated with the corresponding printed Main/Madison floor control.

IMG_1221 · Locate on drawing ↗

Drawing notation: CORRIDOR

Coarse manual trace on upright master; coordinates are provisional.

View all source photographs →