The measured building.

printed room number

Room number separate from column/window marks; footprint geometry remains traced.

printed room number

Room number separate from column/window marks; footprint geometry remains traced.

printed room number

Room number separate from column/window marks; footprint geometry remains traced.

printed room number

Room number separate from column/window marks; footprint geometry remains traced.

printed room number

Room number separate from column/window marks; footprint geometry remains traced.

printed room number

Room number separate from column/window marks; footprint geometry remains traced.

printed room number

Room number separate from column/window marks; footprint geometry remains traced.

printed room number

Room number separate from column/window marks; footprint geometry remains traced.

printed room number

Room number separate from column/window marks; footprint geometry remains traced.

printed room number

Room number separate from column/window marks; footprint geometry remains traced.

printed room number

Room number separate from column/window marks; footprint geometry remains traced.

Analytical ruled-envelope strip count

7 count

Vertically project the registered W3 north segment only to the second-floor datum, then connect matching north cardinal edges of independently registered upper-floor traces. No vertical wall face, thickness, opening cut or physical construction is implied.

Calculated from: f1-enclosed-floor-outline-footprint-trace, f2-floor-outline-footprint-trace, f3-floor-outline-footprint-trace, f4-floor-outline-footprint-trace, f5-floor-outline-footprint-trace, f6-enclosed-floor-outline-footprint-trace, f7-enclosed-floor-outline-footprint-trace, f8-enclosed-envelope-footprint-trace, frame-first-floor-finish, frame-second-floor-finish, env-sixth-F3-level, env-sixth-F4-level, env-sixth-F5-level, frame-sixth-floor-finish, env-sixth-F7-level, frame-eighth-floor-schedule-finish

Analytical ruled-envelope strip count

7 count

Vertically project the registered W3 west segment only to the second-floor datum, then connect matching west cardinal edges of independently registered upper-floor traces. No vertical wall face, thickness, opening cut or physical construction is implied.

Calculated from: f1-enclosed-floor-outline-footprint-trace, f2-floor-outline-footprint-trace, f3-floor-outline-footprint-trace, f4-floor-outline-footprint-trace, f5-floor-outline-footprint-trace, f6-enclosed-floor-outline-footprint-trace, f7-enclosed-floor-outline-footprint-trace, f8-enclosed-envelope-footprint-trace, frame-first-floor-finish, frame-second-floor-finish, env-sixth-F3-level, env-sixth-F4-level, env-sixth-F5-level, frame-sixth-floor-finish, env-sixth-F7-level, frame-eighth-floor-schedule-finish

Analytical ruled-envelope strip count

11 count

Vertically project all five registered W3 south/loading-indentation segments only to the second-floor datum, then connect matching south cardinal edges of independently registered upper-floor traces. No vertical wall face, thickness, opening cut or physical construction is implied.

Calculated from: f1-enclosed-floor-outline-footprint-trace, f2-floor-outline-footprint-trace, f3-floor-outline-footprint-trace, f4-floor-outline-footprint-trace, f5-floor-outline-footprint-trace, f6-enclosed-floor-outline-footprint-trace, f7-enclosed-floor-outline-footprint-trace, f8-enclosed-envelope-footprint-trace, frame-first-floor-finish, frame-second-floor-finish, env-sixth-F3-level, env-sixth-F4-level, env-sixth-F5-level, frame-sixth-floor-finish, env-sixth-F7-level, frame-eighth-floor-schedule-finish

Analytical ruled-envelope strip count

7 count

Vertically project the registered W3 east segment only to the second-floor datum, then connect matching east cardinal edges of independently registered upper-floor traces. No vertical wall face, thickness, opening cut or physical construction is implied.

Calculated from: f1-enclosed-floor-outline-footprint-trace, f2-floor-outline-footprint-trace, f3-floor-outline-footprint-trace, f4-floor-outline-footprint-trace, f5-floor-outline-footprint-trace, f6-enclosed-floor-outline-footprint-trace, f7-enclosed-floor-outline-footprint-trace, f8-enclosed-envelope-footprint-trace, frame-first-floor-finish, frame-second-floor-finish, env-sixth-F3-level, env-sixth-F4-level, env-sixth-F5-level, frame-sixth-floor-finish, env-sixth-F7-level, frame-eighth-floor-schedule-finish

elevationStation.zeroWorldZ

0 ft

Reuses existing provisional symmetric plan/elevation witness transfer. No refit or rescaling performed.

Calculated from: f6-overall-wall-witness-side, f6-wall-column-offset

Median west enclosure face

-33.275 ft

Median of the minimum X extents for levels 2, 3, 5, 6 and 7; exact wall face is not accepted.

Calculated from: f2-stair-e-vertex-1-west, f3-stair-e-vertex-1-west, f5-stair-e-vertex-1-west, f6-stair-e-vertex-1-west, f7-stair-e-vertex-1-west

Median east enclosure face

-24.115 ft

Median of the maximum X extents for levels 2, 3, 5, 6 and 7; exact wall face is not accepted.

Calculated from: f2-stair-e-vertex-3-west, f3-stair-e-vertex-3-west, f5-stair-e-vertex-3-west, f6-stair-e-vertex-3-west, f7-stair-e-vertex-3-west

Median south enclosure face

-71.628 ft

Median of the minimum Z extents for levels 2, 3, 5, 6 and 7; exact wall face is not accepted.

Calculated from: f2-stair-e-vertex-1-north, f3-stair-e-vertex-1-north, f5-stair-e-vertex-1-north, f6-stair-e-vertex-1-north, f7-stair-e-vertex-1-north

Median north enclosure face

-54.971 ft

Median of the maximum Z extents for levels 2, 3, 5, 6 and 7; exact wall face is not accepted.

Calculated from: f2-stair-e-vertex-3-north, f3-stair-e-vertex-3-north, f5-stair-e-vertex-3-north, f6-stair-e-vertex-3-north, f7-stair-e-vertex-3-north

Diagnostic envelope width

9.16 ft

Difference of median X extents; not an accepted clear width.

Calculated from: stair-e-upper-diagnostic-min-x, stair-e-upper-diagnostic-max-x

Diagnostic envelope depth

16.657 ft

Difference of median Z extents; not an accepted clear dimension.

Calculated from: stair-e-upper-diagnostic-min-z, stair-e-upper-diagnostic-max-z

Placed millwork analytical geometry gate

The wall names may be linked to the corresponding cardinal Room 607 plan edges as topological metadata. No millwork line, panel, shelf, door, moulding or track may be positioned on those edges yet.

Topologically correlated cardinal wall identities

4 count

Calculated from: library-607-wall-elevation-count

Shared like-for-like metric controls

0 count

Cardinal wall labels establish semantic correspondence only. The millwork elevations have no classified total-width endpoints, source-space control coordinates, accepted horizontal handedness, or opening instance tied to a plan opening.

north plan trace diagnostic length

45.173393 ft

calculated from provisional traced endpoints; accepted finish-face length remains null.

south plan trace diagnostic length

44.621335 ft

calculated from provisional traced endpoints; accepted finish-face length remains null.

east plan trace diagnostic length

21.638373 ft

calculated from provisional traced endpoints; accepted finish-face length remains null.

west plan trace diagnostic length

22.735201 ft

calculated from provisional traced endpoints; accepted finish-face length remains null.

North door candidate traced width

3.213921 ft

The plan traces one Room 607 north-wall door, but the first millwork audit does not assign any drawn door/open section to that same instance or classify its endpoints.

Accepted millwork-elevation to Room 607 plan transform

Cardinal wall labels establish semantic correspondence only. The millwork elevations have no classified total-width endpoints, source-space control coordinates, accepted horizontal handedness, or opening instance tied to a plan opening.

Accepted placed millwork geometry

Zero shared metric controls connect the millwork elevations to the plan trace.; Room 607 plan boundaries are provisional coarse traces with 3.25-foot conservative uncertainty, not accepted finish faces.; All current exact millwork dimensions lack classified extension-line endpoints.; Horizontal handedness and local origins of the four elevation views are unresolved.; The one traced north-wall plan door has no matched millwork-elevation opening instance.; Vertical baseline, ceiling/millwork top datum and overall wall heights are not accepted.; The drawing explicitly directs the contractor to verify all measurements and conditions on the job.

Analytical local dimension-witness study permitted

1 count

The three secure printed values may be displayed as separate asset-local witness lines only. Their endpoints and datums remain unresolved, so the lines must not be joined into a wall, opening, bookcase or other physical envelope and must not receive a building transform.

Calculated from: library-607-south-wall-local-horizontal-6ft, library-607-south-wall-local-vertical-7ft-8-5-8in, library-607-south-wall-local-vertical-2ft-3-1-2in, library-607-wall-elevation-registration-gate-status

W257 to W8 placement registration gate

No W257 component receives a building transform. W238 now independently classifies the W257 north wall as the W8 public-foyer face, but the remaining lateral hand, south/bench boundary, and metric controls are insufficient. The four-corner projective diagnostic remains non-authoring because its fitted controls are provisional and its bench-zone checks are circular. Only the north/public-foyer face is independently classified; the lateral side hand and the remaining fitted intersections are not independently identified finish-face controls. The W8 Room 602 south boundary is a coarse provisional trace through the bench/dais composition rather than a verified room-wall face chain. W257 combines the east and west wall elevation subject; W238 resolves the north/public face but does not resolve the lateral east/west hand. The four fitted controls have zero residual by construction and therefore do not validate the correspondence. The four candidate bench-zone comparisons were selected using the same interpreted bench/dais geometry and are not independent held-out checks. The diagnostic residuals are below the W8 trace uncertainty but cannot overcome incorrect or circular feature classification. No printed coordinate chain shared by both W257 and W8 has been reconciled.

Circular candidate bench-zone diagnostic RMS

1.521957 ft

No W257 component receives a building transform. W238 now independently classifies the W257 north wall as the W8 public-foyer face, but the remaining lateral hand, south/bench boundary, and metric controls are insufficient. The four-corner projective diagnostic remains non-authoring because its fitted controls are provisional and its bench-zone checks are circular. Only the north/public-foyer face is independently classified; the lateral side hand and the remaining fitted intersections are not independently identified finish-face controls. The W8 Room 602 south boundary is a coarse provisional trace through the bench/dais composition rather than a verified room-wall face chain. W257 combines the east and west wall elevation subject; W238 resolves the north/public face but does not resolve the lateral east/west hand. The four fitted controls have zero residual by construction and therefore do not validate the correspondence. The four candidate bench-zone comparisons were selected using the same interpreted bench/dais geometry and are not independent held-out checks. The diagnostic residuals are below the W8 trace uncertainty but cannot overcome incorrect or circular feature classification. No printed coordinate chain shared by both W257 and W8 has been reconciled.

Circular candidate bench-zone diagnostic maximum residual

2.239989 ft

No W257 component receives a building transform. W238 now independently classifies the W257 north wall as the W8 public-foyer face, but the remaining lateral hand, south/bench boundary, and metric controls are insufficient. The four-corner projective diagnostic remains non-authoring because its fitted controls are provisional and its bench-zone checks are circular. Only the north/public-foyer face is independently classified; the lateral side hand and the remaining fitted intersections are not independently identified finish-face controls. The W8 Room 602 south boundary is a coarse provisional trace through the bench/dais composition rather than a verified room-wall face chain. W257 combines the east and west wall elevation subject; W238 resolves the north/public face but does not resolve the lateral east/west hand. The four fitted controls have zero residual by construction and therefore do not validate the correspondence. The four candidate bench-zone comparisons were selected using the same interpreted bench/dais geometry and are not independent held-out checks. The diagnostic residuals are below the W8 trace uncertainty but cannot overcome incorrect or circular feature classification. No printed coordinate chain shared by both W257 and W8 has been reconciled.

W257 north wall to W8 public-foyer face identity

1 count

No W257 component receives a building transform. W238 now independently classifies the W257 north wall as the W8 public-foyer face, but the remaining lateral hand, south/bench boundary, and metric controls are insufficient. The four-corner projective diagnostic remains non-authoring because its fitted controls are provisional and its bench-zone checks are circular. Only the north/public-foyer face is independently classified; the lateral side hand and the remaining fitted intersections are not independently identified finish-face controls. The W8 Room 602 south boundary is a coarse provisional trace through the bench/dais composition rather than a verified room-wall face chain. W257 combines the east and west wall elevation subject; W238 resolves the north/public face but does not resolve the lateral east/west hand. The four fitted controls have zero residual by construction and therefore do not validate the correspondence. The four candidate bench-zone comparisons were selected using the same interpreted bench/dais geometry and are not independent held-out checks. The diagnostic residuals are below the W8 trace uncertainty but cannot overcome incorrect or circular feature classification. No printed coordinate chain shared by both W257 and W8 has been reconciled.

W238 7'-6-inch candidate control minus W8 traced public-door span

0.429 ft

No W257 component receives a building transform. W238 now independently classifies the W257 north wall as the W8 public-foyer face, but the remaining lateral hand, south/bench boundary, and metric controls are insufficient. The four-corner projective diagnostic remains non-authoring because its fitted controls are provisional and its bench-zone checks are circular. Only the north/public-foyer face is independently classified; the lateral side hand and the remaining fitted intersections are not independently identified finish-face controls. The W8 Room 602 south boundary is a coarse provisional trace through the bench/dais composition rather than a verified room-wall face chain. W257 combines the east and west wall elevation subject; W238 resolves the north/public face but does not resolve the lateral east/west hand. The four fitted controls have zero residual by construction and therefore do not validate the correspondence. The four candidate bench-zone comparisons were selected using the same interpreted bench/dais geometry and are not independent held-out checks. The diagnostic residuals are below the W8 trace uncertainty but cannot overcome incorrect or circular feature classification. No printed coordinate chain shared by both W257 and W8 has been reconciled.

opposite_wall_dimension_instruction

Source-local printed property; no accepted metric transform.

detail_reference_relationship

Cross-reference at full-sheet note block; detailed legibility comes from companion IMG_1220. Individual detail registration remains required.