IMG_1212 · Folder 190FOURTH FLOOR PLAN
Sheet W-6
Extraction: Reviewed · extraction partial. sheet title and title block; complete gross floor plan; room-number bands 401-454; central court; Stairs B, D and E; Elevators 1, 2 and 3; mail stack and mail-chute detail; main corridor label; top, bottom, left and right dimension-chain regions; right-side general notes outer envelope control; central court control; corridor bands; printed room-number locators 401-454; Elevators 1-3; Stairs B/D/E; ten selected doors/openings; all four outer overall chains; court-wall mirrored-dimension note Printed north arrow and the page-left/page-right fourth-floor room-band positions were checked for cardinal orientation. Four printed 160 ft 10 in exterior-face overall control intersections; Raw-raster orientation and cardinal mapping; Elevator 1 and 2 outer-enclosure line candidates; Elevator 3 and Stairs B/D/E bounded locators; Cross-sheet X checks for Elevators 1 and 2; Cross-sheet center check for Stair E Three printed held-out W-6 interior/structural spans and seven candidate source picks checked against the frozen registration. Rooms 401–407 source-space candidate cells, corridor-side door interruptions, west-facade printed chains, vault and local corridor controls; 16 crop receipts retained in the research package. Bounded Room 402 four-side candidate face loop, three door interruptions, façade opening, and distinction from through-running diagrammatic lines. Rooms 421–427 source-space candidate cells, eleven separate wall/face traces, eight door interruptions, seven east-facade openings, seven exact 14-foot facade chains, two closet labels, one unresolved fixture symbol and two printed notes; eleven bounded crop receipts retained in the research package. Stair D W224/W-6 fourth-floor placement comparison; no accepted insertion or opening polygon. Targeted W-6 review of the Broadway fourth-floor 4/11-4/14 opening marks and centered 4 + 6 + 4 foot bay chains. Page-right/Broadway 4/10–4/14 printed opening-key audit; five mark regions, not measured jambs. Text-first physical-pilot gate 3 audit; existing reviewed plan, elevation and section records reused without reopening an archival image. Page-right 4/11 metric/cardinal conflict audit; North arrow points toward raw-raster page-bottom; Madison is page-top and Broadway page-right. Page-right 4/11 metric/cardinal conflict audit; Page-right Broadway mark; source pixel neighborhood [2855,795,2904,850]. It lies nearer page-top/Madison than page-bottom/Main. Page-right 4/11 metric/cardinal conflict audit; Bounded plan opening neighborhood from the Room 421 extraction, not exact jamb picks. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. Room 402 partition face and door-cap repick; source-space only. Stair E fourth-to-fifth physical flight/landing/shaft gate; no solid authorized. Stair E fourth-to-fifth physical flight/landing/shaft gate; no solid authorized. Stair E fourth-to-fifth physical flight/landing/shaft gate; no solid authorized. Stair E fourth-to-fifth physical flight/landing/shaft gate; no solid authorized. Broadway C58–C52 fourth-floor shell physical-bounds gate; control frame only. Broadway C58–C52 fourth-floor shell physical-bounds gate; control frame only. Broadway C58–C52 fourth-floor shell physical-bounds gate; control frame only. Partial timed visual review: Bounded text-first follow-up; ten sequential inspections total across nine derivatives including one W-6 same-source core crop. No accepted physical geometry. Existing verified readings omitted. IMG_1209 uses prior closeout text only. Partial timed visual review: Prior verified extraction reused without duplication; selected new properties only. No full-coverage or physical geometry claim. Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: Mail-chute detail contractor/endpoint interpretation; existing architectural W6 registration and room topology retained. Partial timed visual review: W6 Stair B/D local cross-flight witnesses, entrances and Elevator2 threshold. No wall/stair coordinates altered.
Highlighted reading: 444. Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.
Show every recorded property on this drawing →
Unresolved extraction work
- individual room wall polygons
- exhaustive door-symbol inventory
- all door/window/detail marks
- all dimension-chain values and endpoints
- column/grid symbol schedule
- all finish assignments
- fixture and cabinet inventory
- wall thicknesses and assembly types
- stair flight/riser/landing geometry
- elevator clear dimensions, door sizes, pit and overhead
- section destination sheets
- accepted building-space registration
- closed room polygons
- exhaustive wall and opening trace
- all local dimension-chain values and endpoints
- window inventory
- column/grid schedule
- fixtures and cabinetry
- wall assemblies
- accepted image-to-building registration
- Exact source intersections of the four 160 ft 10 in overall witnesses
- Accepted metric homography from W-6 source space to building feet
- Held-out grid-axis residual checks
- Closed room polygons and physical exterior wall faces
- Independent held-out W-6 architectural dimension controls
- Full classified exterior and courtyard wall-face overlays
- Closed physical room, wall, door, window, shaft and stair geometry
- Elevator 3 refined enclosure and hatch faces
- Local paper/lens distortion field
- Physical/as-built acceptance
- Independent second reviewer re-picks the three Broadway axes and Room 402 clear-face pair on exact raw coordinates; report residuals under the frozen four-corner homography without fitting to these points.
- Resolve 4-inch and 4.5-inch printed partition witnesses to their specific inner/outer ink lines; carry stroke and photographic uncertainty explicitly.
- Close a bounded Room 402–corridor–Room 443 face/door adjacency loop and verify its clear 7-foot corridor crossing at multiple y-stations without snapping walls to the printed width.
- For physical Broadway openings, separately reconcile opening marks, grid names and exterior/room-side faces with the relevant architectural wall section; do not infer thickness from this plan audit.
- eachRoom401Through407: accepted boundary polygon
- eachRoom401Through407: clear width
- eachRoom401Through407: clear depth
- eachRoom401Through407: area
- eachRoom401Through407: wall assembly
- eachRoom401Through407: wall thickness
- eachRoom401Through407: ceiling height
- eachRoom401Through407: complete finish schedule
- eachRoom401Through407: fixture/cabinet inventory
- eachRoom401Through407: accepted world placement
- eachDoor: leaf width
- eachDoor: clear opening
- eachDoor: head height
- eachDoor: jamb depth
- eachDoor: rating
- eachDoor: hardware
- eachDoor: verified handing
- eachDoor: accepted world placement
- westExteriorWall: outside face
- westExteriorWall: centerline
- westExteriorWall: construction thickness
- westExteriorWall: pilaster/bay return geometry
- westExteriorWall: window sill/head
- westExteriorWall: accepted world placement
- corridorPartition: complete opposite face
- corridorPartition: wall type
- corridorPartition: thickness away from the Room 402 printed control
- corridorPartition: door jamb returns
- corridorPartition: accepted world placement
- vault: accepted room ownership
- vault: secure horizontal dimension
- vault: inside clear dimensions
- vault: wall/door construction
- vault: accepted world placement
- dimensionChains: exact grid names at each 14-foot endpoint
- dimensionChains: complete south end-chain transcription
- dimensionChains: accepted relation between printed axes and traced wall faces
- dimensionChains: metric transform
- f4-w6-west-vault-bottom-witness: The characters are not secure enough for exact transcription in this pass; do not use as vault width.
- f4-w6-west-south-end-chain: Several end-bay values south of Room 401 are visible but their digits and applicability to Room 401 versus the elevator/corner bay are unresolved.
- f4-w6-west-room-407-vault-membership: No separate room number is printed inside the vault; retain the relationship as conditional.
- f4-w6-west-door-handing-conflict: Inward swing is visible, but hinge/hand naming requires an agreed approach-side convention and remains null.
- exact clear polygon
- clear area
- finish-face coordinates
- finish schedule assignment
- metric/world placement
- both physical face coordinates
- thickness
- page-up door jamb coordinates
- door leaf width and type
- page-down door jamb coordinates
- opposite corridor-side face at this room
- exact door jamb coordinates
- construction and finish layers
- outside face
- window jamb coordinates
- sill and head heights
- assembly section
- eachRoom421Through427: accepted boundary polygon
- eachRoom421Through427: clear width
- eachRoom421Through427: clear depth
- eachRoom421Through427: area
- eachRoom421Through427: wall assembly
- eachRoom421Through427: accepted wall thickness
- eachRoom421Through427: ceiling height
- eachRoom421Through427: complete finish schedule
- eachRoom421Through427: complete fixture/cabinet inventory
- eachRoom421Through427: accepted world placement
- eachFacadeOpening: accepted source-space jamb-face trace
- eachFacadeOpening: sill height
- eachFacadeOpening: head height
- eachFacadeOpening: frame and sash type
- eachFacadeOpening: glazing
- eachFacadeOpening: accepted world placement
- eastExteriorWall: outside face
- eastExteriorWall: centerline
- eastExteriorWall: construction thickness
- eastExteriorWall: pilaster and bay-return geometry
- eastExteriorWall: accepted world placement
- corridorPartition: face-to-face thickness
- room427Junction: accepted boundary ownership at Room 446
- room427Junction: complete offset-entry polygon
- room427Junction: door A schedule meaning
- room427Junction: circulation role of west/south-core opening
- room427Junction: accepted world placement
- closetsAndFixture: accepted closet polygons
- closetsAndFixture: secure closet dimensions and endpoints
- closetsAndFixture: fixture type and schedule mark
- closetsAndFixture: fixture rough-in and exact placement
- dimensionChains: secure transcription and endpoint classes for the inner vertical chain
- f4-w6-east-inner-dimension-chain: Several interior vertical-chain strings are partly legible, but digits, endpoints and room-by-room applicability cannot all be held together securely. None is promoted as a room clear dimension.
- f4-w6-east-room-425-closet-dimensions: The closet label is secure, but the local dimension strings and their face/centerline endpoints are not secure enough for exact transcription.
- f4-w6-east-room-427-junction-ownership: The principal closed cell is traceable, but the offset entry, adjacent Room 446 enclosure and circulation ownership need a broader south-core extraction before acceptance.
- f4-w6-east-door-handing-conflict: Observed swing direction is recorded, but handing requires an agreed approach-side convention and remains null.
- f4-w6-east-room-426-fixture-class: The symbol is visible, but a fixture schedule/type mark was not established in this bounded pass.
- A dimensioned W-6 station tying the fourth-floor Stair D lines to printed C82/C68 centers, with the symbols positively identified
- Face-equivalence check matching W224's 1-foot-4-inch horizontal witness to one W-6 line and W224's 9-foot vertical witness to one W-6 line
- Independent review of source picks and local distortion under the frozen W-6 transform
- A classified, closed W-6 slab-opening edge distinct from stair enclosure, flight and landing lines
- A separately classified fifth-floor opening and floor-to-floor correspondence
- Door/jamb, rough/finish wall and structural slab/beam interfaces
- Exterior-stone face to masonry-opening boundary depth
- Interior finish face and complete wall thickness
- Rough, masonry, frame, sash and clear-opening boundary equivalence
- Jamb return handedness and complete Section C-C construction
- Head, sill, anchors, glazing and steel-sash profiles
- Independent survey/as-built check
- Verified W-6 Broadway/page-right plan-side 4/11 correspondence
- A printed B02/B05 identifier on IMG_1231 itself or a formal drawing legend for the split-circle syntax
- Accepted W-6 to Broadway elevation metric registration with independent held-out horizontal residual
- Exact W-6 grid/column names at the page-right 4/11 and 4/14 opening axes
- Comparable masonry, frame, sash and clear-opening boundary classifications across W-6, W207 and IMG_1231
- Exterior stone face, wall thickness, opening depth and physical host equivalence
- Independent as-built or survey check
- A W-6-to-world registration solved from classified, source-picked controls with held-out plan residuals.
- A page-right/west/Broadway W-6 chain with exact grid/column identifiers and a resolved end-chain transition.
- A direct plan key tying one W-6 room/opening instance to opening-broadway-F4-B05/broadway-bay-05.
- A face bridge from the W-6 room-side exterior-wall trace to W403's exterior FACE OF STONE, without assuming wall thickness.
- A classification of the IMG_1231 visible opening envelope as the same jamb/masonry/frame boundary measured by W-6.
- One held-out horizontal plan/elevation control with independently known station and comparable endpoints; report its residual and tolerance.
- Review acceptance of the B05 elevation envelope host and station origin; acceptedHostElementId and acceptedStationFeet must become non-null.
- Independently decode IMG_1231 fourth-floor opening keys at both B02 and B09 and the relevant W207 orientation/detail mark.
- Read the W-6 grid names bounding Room 421/4/11, with source-picked axes and a withheld same-class plan/elevation station check.
- Classify exact plan and elevation opening edges as masonry, finished jamb, frame, sash or clear aperture before comparing width residuals.
- Tie the W403 outside FACE OF STONE section to the corrected bay and obtain the opposing interior face and complete layer chain.
- Source-pick both Room 402-side and corridor-side faces at the same stations, classify finish or construction boundaries, and independently verify the printed 4-inch witness connects those faces.
- Pick the wall's two true terminations at its demising intersections; split it at the door with exact two-jamb coordinates and verify the opening width, head and threshold against a door schedule or detail.
- Close reciprocal Room 402/corridor/Room 443 face and door topology, including more than one check of the 7-foot clear corridor witness.
- Validate the frozen W-6 transform locally for classified physical faces and carry uncertainty into canonical X/Z coordinates.
- Establish the wall's physical base and top from an applicable section, ceiling/slab detail or schedule; the 137.25 finished-floor datum and 11.5-foot story interval alone do not give wall height.
- Assign applicable wall assembly and finish layers, material, rating and quantities from the relevant schedule/details.
- physical face class and exact continuous face traces
- verified 4-inch witness application to those faces
- true wall termini or supported segment split topology at both demising junctions
- accepted local canonical X/Z registration with full error budget
- physical base elevation and slab/finish interface
- physical top elevation and ceiling/slab termination
- applicable assembly, layer materials and thicknesses, finish, rating, and quantities
- On W226 close-up IMG_1119 or IMG_1120, transcribe the full typical-plan dimension chain and classify flight, landing, rough-wall and finish-wall endpoints. On registered W6/IMG_1212 and W7/IMG_1213, repick the same physical edge classes and closed floor-opening contours at Stair E; solve the W226 plan-to-canonical transform from non-collinear correspondences and check held-out edges and the adjacent-floor join before authoring one fourth-to-fifth-floor segment.
- same-condition exterior stone to classified interior finish face depth and every intervening layer/material
- architecturally classified north/south wall ends, joints and pier returns rather than support-axis stations
- physical wall base/top and slab-edge interfaces rather than finished-floor schedule datums
- independently checked W-6 to Broadway elevation horizontal registration and B05 key/host identity
- masonry versus visible/frame/clear opening bounds, sill, head, jamb returns and reveal depth
- W403 stone-face continuity away from the floor-beam section and across the 14-foot span
- All unreviewed local dimensions, exact faces/jambs, room applicability, schedules and companion details remain pending; no full-image extraction claim.
- Full room/opening/fixture inventory and property extraction
- Exact witness endpoints, wall faces and closed polygons
- Companion details, schedules and revision authority
- Installed quantities, materials and accepted building registration
- Exact finished/rough/structural/clear face classification and closed boundaries
- Complete local dimension, door/window/type/detail inventory
- Applicable companion construction, finish exceptions and chronology
- Checked physical registration and installed quantities
- Accepted source-to-building transform and like-for-like finished/rough/structural face classification
- Exact closed slab opening, landing perimeter and headroom
- Construction/rail/nosing detail and revision/as-built reconciliation
- All remaining unreviewed regions, notes, schedules and companion details
- Each physical wall/room/opening still needs classified finish/rough/structural faces, closed boundaries, build-up, levels, installed quantity and checked building registration; source glyph closure does not supply these.
- Exact finished/rough/structural/clear endpoint classes, closed boundaries and physical dimensions remain unresolved.
- Installed quantities, construction build-up, fixture/material schedules, original/revision authority and companion applicability remain unresolved.
- Source-to-building registration, datum continuity, independent checks and architectural acceptance remain unaccepted.
- All remaining unreviewed notes, regions, callouts and schedules require further review.
Download OCR observations (unverified)