Gus J. SolomonUnited States Courthouse
MenuClose
← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs
464
Identified objects
4872
Verified printed values
12046
Disputed values
20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

Clear filters
IMG_1212 · Folder 190

FOURTH FLOOR PLAN

Sheet W-6

Extraction: Reviewed · extraction partial. sheet title and title block; complete gross floor plan; room-number bands 401-454; central court; Stairs B, D and E; Elevators 1, 2 and 3; mail stack and mail-chute detail; main corridor label; top, bottom, left and right dimension-chain regions; right-side general notes outer envelope control; central court control; corridor bands; printed room-number locators 401-454; Elevators 1-3; Stairs B/D/E; ten selected doors/openings; all four outer overall chains; court-wall mirrored-dimension note Printed north arrow and the page-left/page-right fourth-floor room-band positions were checked for cardinal orientation. Four printed 160 ft 10 in exterior-face overall control intersections; Raw-raster orientation and cardinal mapping; Elevator 1 and 2 outer-enclosure line candidates; Elevator 3 and Stairs B/D/E bounded locators; Cross-sheet X checks for Elevators 1 and 2; Cross-sheet center check for Stair E Three printed held-out W-6 interior/structural spans and seven candidate source picks checked against the frozen registration. Rooms 401–407 source-space candidate cells, corridor-side door interruptions, west-facade printed chains, vault and local corridor controls; 16 crop receipts retained in the research package. Bounded Room 402 four-side candidate face loop, three door interruptions, façade opening, and distinction from through-running diagrammatic lines. Rooms 421–427 source-space candidate cells, eleven separate wall/face traces, eight door interruptions, seven east-facade openings, seven exact 14-foot facade chains, two closet labels, one unresolved fixture symbol and two printed notes; eleven bounded crop receipts retained in the research package. Stair D W224/W-6 fourth-floor placement comparison; no accepted insertion or opening polygon. Targeted W-6 review of the Broadway fourth-floor 4/11-4/14 opening marks and centered 4 + 6 + 4 foot bay chains. Page-right/Broadway 4/10–4/14 printed opening-key audit; five mark regions, not measured jambs. Text-first physical-pilot gate 3 audit; existing reviewed plan, elevation and section records reused without reopening an archival image. Page-right 4/11 metric/cardinal conflict audit; North arrow points toward raw-raster page-bottom; Madison is page-top and Broadway page-right. Page-right 4/11 metric/cardinal conflict audit; Page-right Broadway mark; source pixel neighborhood [2855,795,2904,850]. It lies nearer page-top/Madison than page-bottom/Main. Page-right 4/11 metric/cardinal conflict audit; Bounded plan opening neighborhood from the Room 421 extraction, not exact jamb picks. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. W-6 Room 402 corridor-wall pilot; only thickness and selected datums have printed numeric support. Room 402 partition face and door-cap repick; source-space only. Stair E fourth-to-fifth physical flight/landing/shaft gate; no solid authorized. Stair E fourth-to-fifth physical flight/landing/shaft gate; no solid authorized. Stair E fourth-to-fifth physical flight/landing/shaft gate; no solid authorized. Stair E fourth-to-fifth physical flight/landing/shaft gate; no solid authorized. Broadway C58–C52 fourth-floor shell physical-bounds gate; control frame only. Broadway C58–C52 fourth-floor shell physical-bounds gate; control frame only. Broadway C58–C52 fourth-floor shell physical-bounds gate; control frame only. Partial timed visual review: Bounded text-first follow-up; ten sequential inspections total across nine derivatives including one W-6 same-source core crop. No accepted physical geometry. Existing verified readings omitted. IMG_1209 uses prior closeout text only. Partial timed visual review: Prior verified extraction reused without duplication; selected new properties only. No full-coverage or physical geometry claim. Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: Mail-chute detail contractor/endpoint interpretation; existing architectural W6 registration and room topology retained. Partial timed visual review: W6 Stair B/D local cross-flight witnesses, entrances and Elevator2 threshold. No wall/stair coordinates altered.

Unresolved extraction work
  • individual room wall polygons
  • exhaustive door-symbol inventory
  • all door/window/detail marks
  • all dimension-chain values and endpoints
  • column/grid symbol schedule
  • all finish assignments
  • fixture and cabinet inventory
  • wall thicknesses and assembly types
  • stair flight/riser/landing geometry
  • elevator clear dimensions, door sizes, pit and overhead
  • section destination sheets
  • accepted building-space registration
  • closed room polygons
  • exhaustive wall and opening trace
  • all local dimension-chain values and endpoints
  • window inventory
  • column/grid schedule
  • fixtures and cabinetry
  • wall assemblies
  • accepted image-to-building registration
  • Exact source intersections of the four 160 ft 10 in overall witnesses
  • Accepted metric homography from W-6 source space to building feet
  • Held-out grid-axis residual checks
  • Closed room polygons and physical exterior wall faces
  • Independent held-out W-6 architectural dimension controls
  • Full classified exterior and courtyard wall-face overlays
  • Closed physical room, wall, door, window, shaft and stair geometry
  • Elevator 3 refined enclosure and hatch faces
  • Local paper/lens distortion field
  • Physical/as-built acceptance
  • Independent second reviewer re-picks the three Broadway axes and Room 402 clear-face pair on exact raw coordinates; report residuals under the frozen four-corner homography without fitting to these points.
  • Resolve 4-inch and 4.5-inch printed partition witnesses to their specific inner/outer ink lines; carry stroke and photographic uncertainty explicitly.
  • Close a bounded Room 402–corridor–Room 443 face/door adjacency loop and verify its clear 7-foot corridor crossing at multiple y-stations without snapping walls to the printed width.
  • For physical Broadway openings, separately reconcile opening marks, grid names and exterior/room-side faces with the relevant architectural wall section; do not infer thickness from this plan audit.
  • eachRoom401Through407: accepted boundary polygon
  • eachRoom401Through407: clear width
  • eachRoom401Through407: clear depth
  • eachRoom401Through407: area
  • eachRoom401Through407: wall assembly
  • eachRoom401Through407: wall thickness
  • eachRoom401Through407: ceiling height
  • eachRoom401Through407: complete finish schedule
  • eachRoom401Through407: fixture/cabinet inventory
  • eachRoom401Through407: accepted world placement
  • eachDoor: leaf width
  • eachDoor: clear opening
  • eachDoor: head height
  • eachDoor: jamb depth
  • eachDoor: rating
  • eachDoor: hardware
  • eachDoor: verified handing
  • eachDoor: accepted world placement
  • westExteriorWall: outside face
  • westExteriorWall: centerline
  • westExteriorWall: construction thickness
  • westExteriorWall: pilaster/bay return geometry
  • westExteriorWall: window sill/head
  • westExteriorWall: accepted world placement
  • corridorPartition: complete opposite face
  • corridorPartition: wall type
  • corridorPartition: thickness away from the Room 402 printed control
  • corridorPartition: door jamb returns
  • corridorPartition: accepted world placement
  • vault: accepted room ownership
  • vault: secure horizontal dimension
  • vault: inside clear dimensions
  • vault: wall/door construction
  • vault: accepted world placement
  • dimensionChains: exact grid names at each 14-foot endpoint
  • dimensionChains: complete south end-chain transcription
  • dimensionChains: accepted relation between printed axes and traced wall faces
  • dimensionChains: metric transform
  • f4-w6-west-vault-bottom-witness: The characters are not secure enough for exact transcription in this pass; do not use as vault width.
  • f4-w6-west-south-end-chain: Several end-bay values south of Room 401 are visible but their digits and applicability to Room 401 versus the elevator/corner bay are unresolved.
  • f4-w6-west-room-407-vault-membership: No separate room number is printed inside the vault; retain the relationship as conditional.
  • f4-w6-west-door-handing-conflict: Inward swing is visible, but hinge/hand naming requires an agreed approach-side convention and remains null.
  • exact clear polygon
  • clear area
  • finish-face coordinates
  • finish schedule assignment
  • metric/world placement
  • both physical face coordinates
  • thickness
  • page-up door jamb coordinates
  • door leaf width and type
  • page-down door jamb coordinates
  • opposite corridor-side face at this room
  • exact door jamb coordinates
  • construction and finish layers
  • outside face
  • window jamb coordinates
  • sill and head heights
  • assembly section
  • eachRoom421Through427: accepted boundary polygon
  • eachRoom421Through427: clear width
  • eachRoom421Through427: clear depth
  • eachRoom421Through427: area
  • eachRoom421Through427: wall assembly
  • eachRoom421Through427: accepted wall thickness
  • eachRoom421Through427: ceiling height
  • eachRoom421Through427: complete finish schedule
  • eachRoom421Through427: complete fixture/cabinet inventory
  • eachRoom421Through427: accepted world placement
  • eachFacadeOpening: accepted source-space jamb-face trace
  • eachFacadeOpening: sill height
  • eachFacadeOpening: head height
  • eachFacadeOpening: frame and sash type
  • eachFacadeOpening: glazing
  • eachFacadeOpening: accepted world placement
  • eastExteriorWall: outside face
  • eastExteriorWall: centerline
  • eastExteriorWall: construction thickness
  • eastExteriorWall: pilaster and bay-return geometry
  • eastExteriorWall: accepted world placement
  • corridorPartition: face-to-face thickness
  • room427Junction: accepted boundary ownership at Room 446
  • room427Junction: complete offset-entry polygon
  • room427Junction: door A schedule meaning
  • room427Junction: circulation role of west/south-core opening
  • room427Junction: accepted world placement
  • closetsAndFixture: accepted closet polygons
  • closetsAndFixture: secure closet dimensions and endpoints
  • closetsAndFixture: fixture type and schedule mark
  • closetsAndFixture: fixture rough-in and exact placement
  • dimensionChains: secure transcription and endpoint classes for the inner vertical chain
  • f4-w6-east-inner-dimension-chain: Several interior vertical-chain strings are partly legible, but digits, endpoints and room-by-room applicability cannot all be held together securely. None is promoted as a room clear dimension.
  • f4-w6-east-room-425-closet-dimensions: The closet label is secure, but the local dimension strings and their face/centerline endpoints are not secure enough for exact transcription.
  • f4-w6-east-room-427-junction-ownership: The principal closed cell is traceable, but the offset entry, adjacent Room 446 enclosure and circulation ownership need a broader south-core extraction before acceptance.
  • f4-w6-east-door-handing-conflict: Observed swing direction is recorded, but handing requires an agreed approach-side convention and remains null.
  • f4-w6-east-room-426-fixture-class: The symbol is visible, but a fixture schedule/type mark was not established in this bounded pass.
  • A dimensioned W-6 station tying the fourth-floor Stair D lines to printed C82/C68 centers, with the symbols positively identified
  • Face-equivalence check matching W224's 1-foot-4-inch horizontal witness to one W-6 line and W224's 9-foot vertical witness to one W-6 line
  • Independent review of source picks and local distortion under the frozen W-6 transform
  • A classified, closed W-6 slab-opening edge distinct from stair enclosure, flight and landing lines
  • A separately classified fifth-floor opening and floor-to-floor correspondence
  • Door/jamb, rough/finish wall and structural slab/beam interfaces
  • Exterior-stone face to masonry-opening boundary depth
  • Interior finish face and complete wall thickness
  • Rough, masonry, frame, sash and clear-opening boundary equivalence
  • Jamb return handedness and complete Section C-C construction
  • Head, sill, anchors, glazing and steel-sash profiles
  • Independent survey/as-built check
  • Verified W-6 Broadway/page-right plan-side 4/11 correspondence
  • A printed B02/B05 identifier on IMG_1231 itself or a formal drawing legend for the split-circle syntax
  • Accepted W-6 to Broadway elevation metric registration with independent held-out horizontal residual
  • Exact W-6 grid/column names at the page-right 4/11 and 4/14 opening axes
  • Comparable masonry, frame, sash and clear-opening boundary classifications across W-6, W207 and IMG_1231
  • Exterior stone face, wall thickness, opening depth and physical host equivalence
  • Independent as-built or survey check
  • A W-6-to-world registration solved from classified, source-picked controls with held-out plan residuals.
  • A page-right/west/Broadway W-6 chain with exact grid/column identifiers and a resolved end-chain transition.
  • A direct plan key tying one W-6 room/opening instance to opening-broadway-F4-B05/broadway-bay-05.
  • A face bridge from the W-6 room-side exterior-wall trace to W403's exterior FACE OF STONE, without assuming wall thickness.
  • A classification of the IMG_1231 visible opening envelope as the same jamb/masonry/frame boundary measured by W-6.
  • One held-out horizontal plan/elevation control with independently known station and comparable endpoints; report its residual and tolerance.
  • Review acceptance of the B05 elevation envelope host and station origin; acceptedHostElementId and acceptedStationFeet must become non-null.
  • Independently decode IMG_1231 fourth-floor opening keys at both B02 and B09 and the relevant W207 orientation/detail mark.
  • Read the W-6 grid names bounding Room 421/4/11, with source-picked axes and a withheld same-class plan/elevation station check.
  • Classify exact plan and elevation opening edges as masonry, finished jamb, frame, sash or clear aperture before comparing width residuals.
  • Tie the W403 outside FACE OF STONE section to the corrected bay and obtain the opposing interior face and complete layer chain.
  • Source-pick both Room 402-side and corridor-side faces at the same stations, classify finish or construction boundaries, and independently verify the printed 4-inch witness connects those faces.
  • Pick the wall's two true terminations at its demising intersections; split it at the door with exact two-jamb coordinates and verify the opening width, head and threshold against a door schedule or detail.
  • Close reciprocal Room 402/corridor/Room 443 face and door topology, including more than one check of the 7-foot clear corridor witness.
  • Validate the frozen W-6 transform locally for classified physical faces and carry uncertainty into canonical X/Z coordinates.
  • Establish the wall's physical base and top from an applicable section, ceiling/slab detail or schedule; the 137.25 finished-floor datum and 11.5-foot story interval alone do not give wall height.
  • Assign applicable wall assembly and finish layers, material, rating and quantities from the relevant schedule/details.
  • physical face class and exact continuous face traces
  • verified 4-inch witness application to those faces
  • true wall termini or supported segment split topology at both demising junctions
  • accepted local canonical X/Z registration with full error budget
  • physical base elevation and slab/finish interface
  • physical top elevation and ceiling/slab termination
  • applicable assembly, layer materials and thicknesses, finish, rating, and quantities
  • On W226 close-up IMG_1119 or IMG_1120, transcribe the full typical-plan dimension chain and classify flight, landing, rough-wall and finish-wall endpoints. On registered W6/IMG_1212 and W7/IMG_1213, repick the same physical edge classes and closed floor-opening contours at Stair E; solve the W226 plan-to-canonical transform from non-collinear correspondences and check held-out edges and the adjacent-floor join before authoring one fourth-to-fifth-floor segment.
  • same-condition exterior stone to classified interior finish face depth and every intervening layer/material
  • architecturally classified north/south wall ends, joints and pier returns rather than support-axis stations
  • physical wall base/top and slab-edge interfaces rather than finished-floor schedule datums
  • independently checked W-6 to Broadway elevation horizontal registration and B05 key/host identity
  • masonry versus visible/frame/clear opening bounds, sill, head, jamb returns and reveal depth
  • W403 stone-face continuity away from the floor-beam section and across the 14-foot span
  • All unreviewed local dimensions, exact faces/jambs, room applicability, schedules and companion details remain pending; no full-image extraction claim.
  • Full room/opening/fixture inventory and property extraction
  • Exact witness endpoints, wall faces and closed polygons
  • Companion details, schedules and revision authority
  • Installed quantities, materials and accepted building registration
  • Exact finished/rough/structural/clear face classification and closed boundaries
  • Complete local dimension, door/window/type/detail inventory
  • Applicable companion construction, finish exceptions and chronology
  • Checked physical registration and installed quantities
  • Accepted source-to-building transform and like-for-like finished/rough/structural face classification
  • Exact closed slab opening, landing perimeter and headroom
  • Construction/rail/nosing detail and revision/as-built reconciliation
  • All remaining unreviewed regions, notes, schedules and companion details
  • Each physical wall/room/opening still needs classified finish/rough/structural faces, closed boundaries, build-up, levels, installed quantity and checked building registration; source glyph closure does not supply these.
  • Exact finished/rough/structural/clear endpoint classes, closed boundaries and physical dimensions remain unresolved.
  • Installed quantities, construction build-up, fixture/material schedules, original/revision authority and companion applicability remain unresolved.
  • Source-to-building registration, datum continuity, independent checks and architectural acceptance remain unaccepted.
  • All remaining unreviewed notes, regions, callouts and schedules require further review.

Download OCR observations (unverified)

Loading the selected drawing…

Scroll or pinch to inspect this drawing. Archival drawing photograph · Oregon Historical Society research collections.

Open source image separately ↗

1925 matching properties

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

f4-room-438verified · printed

Printed room number

438
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 438

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-room-439verified · printed

Printed room number

439
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 439

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-room-440verified · printed

Printed room number

440
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 440

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-room-441verified · printed

Printed room number

441
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 441

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-room-442verified · printed

Printed room number

442
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 442

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-room-443verified · printed

Printed room number

443
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 443

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-room-444verified · printed

Printed room number

444
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 444

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-room-445verified · printed

Printed room number

445
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 445

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-room-446verified · printed

Printed room number

446
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 446

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-room-447verified · printed

Printed room number

447
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 447

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-room-448verified · printed

Printed room number

448
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 448

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-room-449verified · printed

Printed room number

449
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 449

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-room-450verified · printed

Printed room number

450
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 450

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-room-451verified · printed

Printed room number

451
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 451

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-room-452verified · printed

Printed room number

452
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 452

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-room-453verified · printed

Printed room number

453
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 453

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-room-454verified · printed

Printed room number

454
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 454

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-w6-use-offices-fin-1verified · printed

Printed use and finish label

OFFICES / FIN. NO. 1

The label is clear, but its exact set of room-number bubbles was not assigned.

IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: OFFICES / FIN. NO. 1

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-w6-use-room-444verified · printed

Printed use and finish label

MENS TOILET / FIN. NO. 4
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: MENS TOILET / FIN. NO. 4

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-w6-use-room-445verified · printed

Printed use and finish label

OFFICE / FIN. NO. 1
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: OFFICE / FIN. NO. 1

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-w6-use-room-446verified · printed

Printed use and finish label

WOMENS TOILET / FIN. NO. 4
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: WOMENS TOILET / FIN. NO. 4

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-w6-use-room-447verified · printed

Printed use and finish label

WOMENS REST ROOM / FIN. NO. 1
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: WOMENS REST ROOM / FIN. NO. 1

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-w6-use-vault-407-bandverified · printed

Printed use and finish label

VAULT / FIN. NO. 5

The vault is visibly within the 407-area suite, but the room-number applicability is not promoted here.

IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: VAULT / FIN. NO. 5

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-w6-note-finish-scheduleverified · printed

Printed general note

FOR SCHEDULE OF FINISHES - GENERAL NOTES - ETC. SEE SHEETS NO. 3 AND 4.
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: FOR SCHEDULE OF FINISHES - GENERAL NOTES - ETC. SEE SHEETS NO. 3 AND 4.

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-w6-note-not-in-contractverified · printed

Printed general note

COUNTER TOPS AND SHELVES IN ROOMS 427-438 - 441-448 AND HOOD IN ROOM 441, NOT IN CONTRACT
IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: COUNTER TOPS AND SHELVES IN ROOMS 427-438 - 441-448 AND HOOD IN ROOM 441, NOT IN CONTRACT

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-w6-finished-floor-elevationverified · printed

Finished-floor elevation

FIN. FL. ELEV. 137.25

137.25 ft

IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: FIN. FL. ELEV. 137.25

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-w6-dimension-chain-page-topverified · printed

overall printed chain

160'-10"

160.833333 ft

IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 160'-10"

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-w6-dimension-chain-page-topunreviewed · printed

Remaining printed dimension-chain values and endpoints

Unresolved
IMG_1212 · sheet-W6 · Locate on drawing ↗

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-w6-dimension-chain-page-bottomverified · printed

overall printed chain

160'-10"

160.833333 ft

IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: 160'-10"

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-w6-dimension-chain-page-bottomunreviewed · printed

Remaining printed dimension-chain values and endpoints

Unresolved
IMG_1212 · sheet-W6 · Locate on drawing ↗

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-w6-dimension-chain-page-leftunreviewed · printed

Remaining printed dimension-chain values and endpoints

Unresolved
IMG_1212 · sheet-W6 · Locate on drawing ↗

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-w6-dimension-chain-page-rightunreviewed · printed

Remaining printed dimension-chain values and endpoints

Unresolved
IMG_1212 · sheet-W6 · Locate on drawing ↗

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-w6-dimension-chain-court-wallunreviewed · printed

Remaining printed dimension-chain values and endpoints

Unresolved

DIMENSIONS FOR THIS WALL SAME AS THOSE ON OPPOSITE SIDE

IMG_1212 · sheet-W6 · Locate on drawing ↗

Drawing notation: DIMENSIONS FOR THIS WALL SAME AS THOSE ON OPPOSITE SIDE

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-floor-outlineunreviewed · observed

Architectural boundary world registration

Unresolved

W-6 source-space trace has no accepted plan transform.

IMG_1212 · sheet-W6 · Locate on drawing ↗

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-central-court-opening-candidateunreviewed · observed

exact-dimensions

Unresolved

Numeric value unresolved

Large unoccupied central court/opening. Polygon is a coarse source-space inner-edge trace, not an exact structural opening.

IMG_1212 · sheet-W6 · Locate on drawing ↗

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

f4-central-court-opening-candidateunreviewed · observed

edge-wall-thickness

Unresolved

Numeric value unresolved

Large unoccupied central court/opening. Polygon is a coarse source-space inner-edge trace, not an exact structural opening.

IMG_1212 · sheet-W6 · Locate on drawing ↗

Decoded raw raster is upright; the JPEG EXIF Rotate 90 CW tag is explicitly ignored for this source package.

View all source photographs →