printed-width
UnresolvedNumeric value unresolved
Drawing notation: Continuous corridor floor around corner
Raw-upright master source locator; trace is approximate.
Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.
464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.
Download the structured register (JSON)Original sheet identity has not yet been reconciled.
Extraction: Reviewed · extraction partial. Partial: Third floor plan boundaries, room identities, opening candidates and printed control chains. Third-floor outer trace reused only as a parent of the analytical registration curtain. Confirmed Stair D identity, source handedness, third-floor elevation title, and candidate C68/C82-to-perimeter alignments. Existing third-floor door topology reused only. Reused the provisional level-3 Stair E plan envelope as one input to a cross-floor median diagnostic envelope. Partial timed visual review: Bounded text-first follow-up; ten sequential inspections total across nine derivatives including one W-6 same-source core crop. No accepted physical geometry. Existing verified readings omitted. IMG_1209 uses prior closeout text only. Partial timed visual review: Prior verified extraction reused without duplication; selected new properties only. No full-coverage or physical geometry claim. Partial timed visual review: undefined Partial timed visual review: undefined Partial timed visual review: Third-floor source-local Men's339/adjacent janitor and service annotations. Raw0; access WebP's270-degree orientation not used. Partial timed visual review: Text reuse only: floors-2-3 topology records B/D/E only on third floor and explains access WebP rotation 270° from upright raw master. No whole plan reopened.
Show coordinated geometry overlay →
Registration: provisional · 4 independent checks · maximum residual 0.567 ft.
Loading the selected drawing…
Scroll or pinch to inspect this drawing. Archival drawing photograph · Oregon Historical Society research collections.
Open source image separately ↗Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.
Numeric value unresolved
Drawing notation: Continuous corridor floor around corner
Raw-upright master source locator; trace is approximate.
15.583333 ft
Drawing notation: 15′7″
Bay chain east to west; source region locates the chain, not an exact individual text bounding box.
14 ft
Drawing notation: 14′0″
Bay chain east to west; source region locates the chain, not an exact individual text bounding box.
15 ft
Drawing notation: 15′0″
Bay chain east to west; source region locates the chain, not an exact individual text bounding box.
13 ft
Drawing notation: 13′0″
Bay chain east to west; source region locates the chain, not an exact individual text bounding box.
14 ft
Drawing notation: 14′0″
Bay chain east to west; source region locates the chain, not an exact individual text bounding box.
14 ft
Drawing notation: 14′0″
Bay chain east to west; source region locates the chain, not an exact individual text bounding box.
14 ft
Drawing notation: 14′0″
Bay chain east to west; source region locates the chain, not an exact individual text bounding box.
13 ft
Drawing notation: 13′0″
Bay chain east to west; source region locates the chain, not an exact individual text bounding box.
15 ft
Drawing notation: 15′0″
Bay chain east to west; source region locates the chain, not an exact individual text bounding box.
14 ft
Drawing notation: 14′0″
Bay chain east to west; source region locates the chain, not an exact individual text bounding box.
15.583333 ft
Drawing notation: 15′7″
Bay chain east to west; source region locates the chain, not an exact individual text bounding box.
22.583333 ft
Drawing notation: 22′7″
Bay chain north to south; source region locates the chain, not an exact individual text bounding box.
14 ft
Drawing notation: 14′0″
Bay chain north to south; source region locates the chain, not an exact individual text bounding box.
14 ft
Drawing notation: 14′0″
Bay chain north to south; source region locates the chain, not an exact individual text bounding box.
14 ft
Drawing notation: 14′0″
Bay chain north to south; source region locates the chain, not an exact individual text bounding box.
14 ft
Drawing notation: 14′0″
Bay chain north to south; source region locates the chain, not an exact individual text bounding box.
14 ft
Drawing notation: 14′0″
Bay chain north to south; source region locates the chain, not an exact individual text bounding box.
14 ft
Drawing notation: 14′0″
Bay chain north to south; source region locates the chain, not an exact individual text bounding box.
14 ft
Drawing notation: 14′0″
Bay chain north to south; source region locates the chain, not an exact individual text bounding box.
14 ft
Drawing notation: 14′0″
Bay chain north to south; source region locates the chain, not an exact individual text bounding box.
22.583333 ft
Drawing notation: 22′7″
Bay chain north to south; source region locates the chain, not an exact individual text bounding box.
157.166667 ft
Drawing notation: Sum of printed bay chain
Calculated from: f3-main-bay-01, f3-main-bay-02, f3-main-bay-03, f3-main-bay-04, f3-main-bay-05, f3-main-bay-06, f3-main-bay-07, f3-main-bay-08, f3-main-bay-09, f3-main-bay-10, f3-main-bay-11
157.166667 ft
Drawing notation: Sum of printed bay chain
Calculated from: f3-side-bay-01, f3-side-bay-02, f3-side-bay-03, f3-side-bay-04, f3-side-bay-05, f3-side-bay-06, f3-side-bay-07, f3-side-bay-08, f3-side-bay-09, f3-side-bay-10
160.833333 ft
Drawing notation: 160′10″
This property is not a room width or wall thickness.
1.833333 ft
Drawing notation: 1′10″
This property is not a room width or wall thickness.
1.833333 ft
Drawing notation: 1′10″
This property is not a room width or wall thickness.
20 count
Drawing notation: UP 20R
Applies to the marked flight only; not a floor-to-floor rise or a complete stair model.
20 count
Drawing notation: DOWN 20R
Applies to the marked flight only; not a floor-to-floor rise or a complete stair model.
20 count
Drawing notation: UP 20R
Applies to the marked flight only; not a floor-to-floor rise or a complete stair model.
20 count
Drawing notation: DOWN 20R
Applies to the marked flight only; not a floor-to-floor rise or a complete stair model.
157.166667 ft
Drawing notation: 157′2″ calculated from printed third-floor bay chains
This dimension is not printed/read on IMG_1335. Transfer needs same-grid verification.
Calculated from: f3-main-chain-sum, f3-side-chain-sum
7 count
Vertically project the registered W3 north segment only to the second-floor datum, then connect matching north cardinal edges of independently registered upper-floor traces. No vertical wall face, thickness, opening cut or physical construction is implied.
Drawing notation: FIRST FLOOR PLAN
Existing W3 enclosed-floor outer trace reused; not reopened for this derivation. The Madison loading indentation is retained as five separate curtain segments.
Drawing notation: SECOND FLOOR PLAN
Existing W4 outer-envelope trace; not reopened for this derivation.
Drawing notation: THIRD FLOOR PLAN
Existing third-floor outer-envelope trace; not reopened for this derivation.
Drawing notation: FOURTH FLOOR PLAN / HEATING AND LIGHTING
Existing provisional MEP-underlay outer trace; not reopened and not treated as an accepted architectural wall face.
Drawing notation: FIFTH FLOOR PLAN
Existing W7 outer-envelope trace; not reopened for this derivation.
Drawing notation: SIXTH FLOOR PLAN
Existing W8 outer-envelope trace; not reopened for this derivation.
Drawing notation: SEVENTH FLOOR PLAN
Existing seventh-floor outer-envelope trace; not reopened for this derivation.
Drawing notation: EIGHTH FLOOR & ATTIC PLAN
Existing W10 outer-envelope trace; not reopened for this derivation.
Calculated from: f1-enclosed-floor-outline-footprint-trace, f2-floor-outline-footprint-trace, f3-floor-outline-footprint-trace, f4-floor-outline-footprint-trace, f5-floor-outline-footprint-trace, f6-enclosed-floor-outline-footprint-trace, f7-enclosed-floor-outline-footprint-trace, f8-enclosed-envelope-footprint-trace, frame-first-floor-finish, frame-second-floor-finish, env-sixth-F3-level, env-sixth-F4-level, env-sixth-F5-level, frame-sixth-floor-finish, env-sixth-F7-level, frame-eighth-floor-schedule-finish
7 count
Vertically project the registered W3 west segment only to the second-floor datum, then connect matching west cardinal edges of independently registered upper-floor traces. No vertical wall face, thickness, opening cut or physical construction is implied.
Drawing notation: FIRST FLOOR PLAN
Existing W3 enclosed-floor outer trace reused; not reopened for this derivation. The Madison loading indentation is retained as five separate curtain segments.
Drawing notation: SECOND FLOOR PLAN
Existing W4 outer-envelope trace; not reopened for this derivation.
Drawing notation: THIRD FLOOR PLAN
Existing third-floor outer-envelope trace; not reopened for this derivation.
Drawing notation: FOURTH FLOOR PLAN / HEATING AND LIGHTING
Existing provisional MEP-underlay outer trace; not reopened and not treated as an accepted architectural wall face.
Drawing notation: FIFTH FLOOR PLAN
Existing W7 outer-envelope trace; not reopened for this derivation.
Drawing notation: SIXTH FLOOR PLAN
Existing W8 outer-envelope trace; not reopened for this derivation.
Drawing notation: SEVENTH FLOOR PLAN
Existing seventh-floor outer-envelope trace; not reopened for this derivation.
Drawing notation: EIGHTH FLOOR & ATTIC PLAN
Existing W10 outer-envelope trace; not reopened for this derivation.
Calculated from: f1-enclosed-floor-outline-footprint-trace, f2-floor-outline-footprint-trace, f3-floor-outline-footprint-trace, f4-floor-outline-footprint-trace, f5-floor-outline-footprint-trace, f6-enclosed-floor-outline-footprint-trace, f7-enclosed-floor-outline-footprint-trace, f8-enclosed-envelope-footprint-trace, frame-first-floor-finish, frame-second-floor-finish, env-sixth-F3-level, env-sixth-F4-level, env-sixth-F5-level, frame-sixth-floor-finish, env-sixth-F7-level, frame-eighth-floor-schedule-finish
11 count
Vertically project all five registered W3 south/loading-indentation segments only to the second-floor datum, then connect matching south cardinal edges of independently registered upper-floor traces. No vertical wall face, thickness, opening cut or physical construction is implied.
Drawing notation: FIRST FLOOR PLAN
Existing W3 enclosed-floor outer trace reused; not reopened for this derivation. The Madison loading indentation is retained as five separate curtain segments.
Drawing notation: SECOND FLOOR PLAN
Existing W4 outer-envelope trace; not reopened for this derivation.
Drawing notation: THIRD FLOOR PLAN
Existing third-floor outer-envelope trace; not reopened for this derivation.
Drawing notation: FOURTH FLOOR PLAN / HEATING AND LIGHTING
Existing provisional MEP-underlay outer trace; not reopened and not treated as an accepted architectural wall face.
Drawing notation: FIFTH FLOOR PLAN
Existing W7 outer-envelope trace; not reopened for this derivation.
Drawing notation: SIXTH FLOOR PLAN
Existing W8 outer-envelope trace; not reopened for this derivation.
Drawing notation: SEVENTH FLOOR PLAN
Existing seventh-floor outer-envelope trace; not reopened for this derivation.
Drawing notation: EIGHTH FLOOR & ATTIC PLAN
Existing W10 outer-envelope trace; not reopened for this derivation.
Calculated from: f1-enclosed-floor-outline-footprint-trace, f2-floor-outline-footprint-trace, f3-floor-outline-footprint-trace, f4-floor-outline-footprint-trace, f5-floor-outline-footprint-trace, f6-enclosed-floor-outline-footprint-trace, f7-enclosed-floor-outline-footprint-trace, f8-enclosed-envelope-footprint-trace, frame-first-floor-finish, frame-second-floor-finish, env-sixth-F3-level, env-sixth-F4-level, env-sixth-F5-level, frame-sixth-floor-finish, env-sixth-F7-level, frame-eighth-floor-schedule-finish
7 count
Vertically project the registered W3 east segment only to the second-floor datum, then connect matching east cardinal edges of independently registered upper-floor traces. No vertical wall face, thickness, opening cut or physical construction is implied.
Drawing notation: FIRST FLOOR PLAN
Existing W3 enclosed-floor outer trace reused; not reopened for this derivation. The Madison loading indentation is retained as five separate curtain segments.
Drawing notation: SECOND FLOOR PLAN
Existing W4 outer-envelope trace; not reopened for this derivation.
Drawing notation: THIRD FLOOR PLAN
Existing third-floor outer-envelope trace; not reopened for this derivation.
Drawing notation: FOURTH FLOOR PLAN / HEATING AND LIGHTING
Existing provisional MEP-underlay outer trace; not reopened and not treated as an accepted architectural wall face.
Drawing notation: FIFTH FLOOR PLAN
Existing W7 outer-envelope trace; not reopened for this derivation.
Drawing notation: SIXTH FLOOR PLAN
Existing W8 outer-envelope trace; not reopened for this derivation.
Drawing notation: SEVENTH FLOOR PLAN
Existing seventh-floor outer-envelope trace; not reopened for this derivation.
Drawing notation: EIGHTH FLOOR & ATTIC PLAN
Existing W10 outer-envelope trace; not reopened for this derivation.
Calculated from: f1-enclosed-floor-outline-footprint-trace, f2-floor-outline-footprint-trace, f3-floor-outline-footprint-trace, f4-floor-outline-footprint-trace, f5-floor-outline-footprint-trace, f6-enclosed-floor-outline-footprint-trace, f7-enclosed-floor-outline-footprint-trace, f8-enclosed-envelope-footprint-trace, frame-first-floor-finish, frame-second-floor-finish, env-sixth-F3-level, env-sixth-F4-level, env-sixth-F5-level, frame-sixth-floor-finish, env-sixth-F7-level, frame-eighth-floor-schedule-finish
Drawing notation: STAIR D
Raw master upright; rotate the stored 1650×2200 access WebP 90° clockwise to match this reference. Existing canonical f3-stair-d corresponds to this explicitly labeled assembly, not Stair B.
Matches plan handedness and door side. Does not determine translation or wall thickness.
Drawing notation: UP 20R / DOWN 20R
Raw master upright; rotate the stored 1650×2200 access WebP 90° clockwise to match this reference.
Drawing notation: 3RD, 4TH, 5TH & 6TH FLOOR PLAN
Compare with the already-recorded full typical plan in stair-assembly-first.json.
Drawing notation: MADISON ST. / BROADWAY / MAIN ST. / SIXTH ST.
Raw master upright; rotate the stored 1650×2200 access WebP 90° clockwise to match this reference. Compass/street key read in the single overview; consistent with existing canonical axes.
1 ratio
Axis direction only; no scale fitting or insertion translation.
Drawing notation: STAIR D / UP 20R / DOWN 20R
Raw master upright; rotate the stored 1650×2200 access WebP 90° clockwise to match this reference.
Drawing notation: STAIR D typical plan
Calculated from: f3-stair-d-placement-type-correspondence, f3-stair-d-placement-compass