IMG_1202 · Folder 190FIRST FLOOR PLAN
Sheet W3
Extraction: Reviewed · extraction partial. Initial control subset: two exterior overall spans, two column-bay chains with end offsets and arithmetic closure, named spaces, three elevator/stair identities, selected heights and scale-pit dimensions. Provisional registration; coarse footprint trace of named rooms, three elevators, stairs A/C/E, Registry storage stair, loading recess, platform, scale pit and visible door relationships. Partial W3 first-floor core host-boundary and landing audit. Main foyer, immediately adjacent Public Lobby screen row, and opposite Main Street door row only Public-lobby furniture band reviewed for printed DESK symbols, count, relative position, orientation and room containment. Four candidate centers were picked and transformed through the existing provisional registration. Reused verified W3 public-lobby DESK count, room containment, horizontal-axis alignment, east-west long axes and provisional registered centers; no drawing reopened. Bounded W218 plate type and W3 plan-candidate gate; not an installed desk placement. Independent W3 confirmation of Q–Y identities, order, host wall, terminal anchors and handedness. Bounded first-floor elevator audit: FIRST FLOOR PLAN. Bounded first-floor elevator audit: FIRST FLOOR PLAN. Bounded first-floor elevator audit: FIRST FLOOR PLAN. Column identities, first-floor elevator contexts and terminal Main dimension-chain controls only. Elevator detail-to-W3 physical-placement gate: FIRST FLOOR PLAN. Partial entrance-registration review: The prior W3 trace is retained as a provisional entrance-center witness with 2-foot uncertainty. Its traced 4.602-foot length is not used as the finished or operating width. First-floor enclosed outer trace reused only as a parent of the analytical first-story registration curtain. Reuse of existing text/registered property data only; no new image review. Named PUBLIC LOBBY and printed ceiling-height reading. Normalized from an existing text re-audit; this import did not reopen the source image. Partial W3 review: Bay P wall endpoints, label/handedness and independent doorway-center check. Main entrance stair plan only: centerline, upper run endpoint, lower run endpoint, rear landing reference and lower outside-edge width witnesses. Reused registered Main entrance stair centerline, run axis, and endpoints for rail-axis placement. prior text package reused; image not reopened; bounded source review. Center entrance bronze-leaf physical placement gate; one IMG_1298 region checked against prior entrance packages. Center entrance bronze-leaf physical placement gate; one IMG_1298 region checked against prior entrance packages. Elevator-front bounded gate: Elevator 1 entrance center and orientation diagnostic; 2 ft trace uncertainty. Elevator-front bounded gate: Elevator 2 Bay P analytical station; 2 ft trace uncertainty. W3 Main foyer/public lobby screen physical-polygon gate; source group review remains partial. W3 Main foyer/public lobby screen physical-polygon gate; source group review remains partial. W3 Main foyer/public lobby screen physical-polygon gate; source group review remains partial. Elevator No. 1 first-floor cross-sheet physical placement gate; one-axis controls only. Elevator No. 1 first-floor cross-sheet physical placement gate; one-axis controls only. Public lobby W-214/W-4 marble finish-floor gate; typical-bay and room-boundary review partial. Public lobby W-214/W-4 marble finish-floor gate; typical-bay and room-boundary review partial. Public lobby W-214/W-4 marble finish-floor gate; typical-bay and room-boundary review partial. Public lobby W-214/W-4 marble finish-floor gate; typical-bay and room-boundary review partial. W3 first-floor finish note MAIN ENTRANCE FOYER; material identities only. W3 first-floor finish note MAIN POST OFFICE LOBBY; material identities only. W3 first-floor finish note BROADWAY ENTRANCE FOYER; material identities only. W3 first-floor finish note MAIN STAIRS 'A' AND 'C' - 1ST TO 2ND FLOOR; material identities only. W3 first-floor finish note SUPT. OF MAILS; material identities only. W3 first-floor finish note REGISTRY - C.O.D. POSTAL SAVINGS - M.O. AND STAMPS; material identities only. W3 first-floor finish note VAULTS; material identities only. W3 first-floor finish note POST OFFICE WORK ROOM; material identities only. W3 first-floor finish note MAILING VESTIBULE; material identities only. W3 first-floor finish note MAILING PLATFORM AND TRUCK ENTRANCE; material identities only. W3 first-floor finish note ELEVATOR HALL NO. 3; material identities only. W3 first-floor finish note TOILET ROOMS; material identities only. W3 first-floor finish note STAIR HALL 'E'; material identities only. W3 millwork finish schedule; named exceptions and cross-floor default rules transcribed. Conditional Q-Y central-axis/printed-chain comparison against held-out W3 trace. Conditional Q-Y central-axis/printed-chain comparison against held-out W3 trace. Conditional Q-Y central-axis/printed-chain comparison against held-out W3 trace. Conditional Q-Y central-axis/printed-chain comparison against held-out W3 trace. Conditional Q-Y central-axis/printed-chain comparison against held-out W3 trace. Conditional Q-Y central-axis/printed-chain comparison against held-out W3 trace. Conditional Q-Y central-axis/printed-chain comparison against held-out W3 trace. Conditional Q-Y central-axis/printed-chain comparison against held-out W3 trace. Conditional Q-Y central-axis/printed-chain comparison against held-out W3 trace. Conditional Q-Y central-axis/printed-chain comparison against held-out W3 trace. Main/foyer-lobby Bay U screen physical-segment gate; no finite solid authorized. Main/foyer-lobby Bay U screen physical-segment gate; no finite solid authorized. Main/foyer-lobby Bay U screen physical-segment gate; no finite solid authorized. Main/foyer-lobby Bay U screen physical-segment gate; no finite solid authorized. Main/foyer-lobby Bay U screen physical-segment gate; no finite solid authorized. Main/foyer-lobby Bay U screen physical-segment gate; no finite solid authorized. Main/foyer-lobby Bay U screen physical-segment gate; no finite solid authorized. Stair A first-floor flight/landing/slab-cut physical gate; no solid authorized. Stair A first-floor flight/landing/slab-cut physical gate; no solid authorized. Stair A first-floor flight/landing/slab-cut physical gate; no solid authorized. Stair A first-floor flight/landing/slab-cut physical gate; no solid authorized. Stair A first-floor flight/landing/slab-cut physical gate; no solid authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. Main exterior center framed-entrance physical gate; no finite frame or host-wall cut authorized. W214 P5/P6 ceiling-panel/light installation gate; physical fixture position unresolved. W214 P5/P6 ceiling-panel/light installation gate; physical fixture position unresolved. W214 P5/P6 ceiling-panel/light installation gate; physical fixture position unresolved. Partial timed visual review: Additive bounded follow-up; coordinates normalized to unrotated access raster. Original plan/topology records retained. No model acceptance or complete-sheet claim. Partial timed visual review: undefined Partial timed visual review: Source-local partial review; no physical coordinates accepted. Partial timed visual review: undefined Partial timed visual review: First-floor C wrapper / Elevator2 interface; prior count/flight-chain evidence retained.
Highlighted reading: 77.49 ft (trace). Manually traced region in raw-upright JPEG coordinates; not an exact architectural measurement.
Show every recorded property on this drawing →
Show coordinated geometry overlay →
Registration: provisional · 4 independent checks · maximum residual 0.985 ft.
Unresolved extraction work
- Systematic region-by-region extraction of the entire sheet has not been completed.
- No photograph homography or scale-based trace has been accepted; world X/Z placements, room polygons and physical wall-face coordinates remain absent.
- South/Madison truck/loading recess, exterior terraces and Main entrance steps require boundary extraction; overall square dimensions do not define the actual first-floor slab.
- Every individual wall segment, thickness, opening width/height, sill/head, finish surface and ceiling recess needs its own measured record.
- Shaft clear widths/depths and all elevator openings require detail/cross-sheet checks. Null records prohibit filling them from apparent pixel widths.
- Stair A/C up-flight riser counts are extracted; widths, tread/riser dimensions, down-flight counts, landings and service Stair E geometry require detail sheets.
- Post-office work-space and mailing-vestibule ceiling inches are unreadable in this subset; values remain null.
- Special-delivery abbreviation and formal room-number system remain unresolved; circled marks have not been used as room IDs.
- Lock-box schedules, numbered bay types, furnishings, toilets, counters, safes, parcel-post fixtures, built-ins, notes, door dimensions, symbols and finish schedules remain substantially unextracted.
- Service platform/ramp elevations, gutters, drain levels and spot elevations are visible but not safely transcribed.
- IMG_1203 was consulted as OCR only; its relationship/detail coverage needs visual reconciliation when those fixtures are extracted.
- No completeness percentage, fully extracted-floor claim, as-built certification, or rendered geometry is supported by this file.
- Every drawing region/note/schedule has not been transcribed
- Ceiling and floor finish schedule
- Each wall thickness and wall type
- Window instances and exact dimensions
- Full door hardware/type/head/sill schedule
- Minor closets, shafts and service penetrations not labeled clearly
- Piers, local offsets and counter details
- Terraces and steps
- Stair flight elevations and structure
- Registered comparison with companion detail sheets
- rough and finish face class
- physical thickness
- accepted station and end joins
- vertical extent
- material/finish at each segment
- complete jamb/reveal/threshold schedule
- stair openings and levels
- shaft wall construction
- elevator sill/head/door clear opening
- Stair A/C postal-room door host and jambs
- dimensioned screen front and back face classes and depth
- accepted face station tied to W3 or named axes
- three finished jamb station pairs and rough opening extents
- individual leaf sizes, sill/head elevations and threshold/reveal depths
- mullion and pier widths, materials by segment, vertical extent and returns
- independent held-out plan control for any future metric placement
- No systematic review of every W3 furniture, equipment or note symbol was performed.
- Symbol outline dimensions and represented projection remain unresolved.
- W3 registration remains provisional/unreviewed.
- No W-218/type cross-reference was found on the reviewed desk symbols.
- The W3 registration remains provisional with 2 ft center uncertainty.
- The symbol projection and physical furniture footprint are not independently dimensioned on W3.
- No directed east/west facing is established.
- 10-inch plate axis relative to desk length
- plate-center position relative to support centerline
- base-plate hole positions and diameters
- steel grade and finish
- accepted W3-to-W218 physical type/instance mapping and as-built transforms
- an independently printed W3 Q-Y width chain or exact plan stations for at least two non-coincident boundaries
- a classified Q and Y terminal endpoint on W3
- a classified north-wall plan face or axis and its building Z station
- a printed/dimensioned W3 counterpart for the W-214 lobby centerline
- one held-out interval or wall-face control not used to solve the transform
- review of the earlier provisional W3 homography and wall endpoints if they are to remain as diagnostics
- Accepted world wall faces and exact shaft polygons for all three elevators
- Registered relationship between W229/W230/W231 detail coordinates and W3 world coordinates
- Rough-versus-finished enclosure wall planes and wall thicknesses
- W217 title-block confirmation and exact endpoint interpretation for the 3'-6" and 6'-9 3/4" door readings
- Exact first-floor Elevator 3 door width, height, jamb/head/sill and rough opening
- Readable Elevator 3 vertical hatch/shaft witness
- Car/cab/platform sizes, rail/counterweight coordinates, pit depths and overhead clearances
- Accepted ramp length, slope and threshold build-up at Elevator 3
- Architecturally accepted reconciliation of all floor traces, especially the fourth-floor mechanical underlay
- Accepted elevator wall/hatch faces remain absent.
- For W229, the west outside enclosure face is fixed at world X = -65.020833 ft and the south/north clear-hatch edges are fixed at world Z = 46/56 ft; both clear-hatch world-X edges remain unresolved. For W230, the east outside enclosure face is fixed at X = 65.020833 ft and the clear-hatch east/west edges at X = 66.083333/73.083333 ft; both clear-hatch world-Z edges remain unresolved. Both elevators still lack finite enclosure-face endpoints, opposite faces, wall thickness and complete hatch-to-wall construction.
- For W231, an exact non-collinear column/grid frame and a complete, classified shaft or clear-hatch width/depth chain.
- Rough-face versus finish-face classification and wall thickness for each enclosure side.
- Independently accepted matching W3 hatch or shaft faces and a reported hold-out corner residual.
- Pit depth, overhead, slab opening and cross-floor continuation evidence for each elevator independently.
- World wall plane and jamb-center/inside-jamb offsets for all three entrances.
- Operating clear width and height, rough opening, leaf overlap/travel, sill, head and wall-thickness build-up.
- Elevator 3 first-floor entrance dimensions and endpoint classes.
- An independent check tying each local door centerline to the corresponding W3 landing wall.
- Cab-to-hatch origin, platform size and inside-clear dimensions.
- Guide-rail, counterweight and bracket centerlines tied to classified hatch faces.
- Confirmed assignment of W219 Cab E elevations to Elevator 1, 2 or 3.
- Door operator, travel/pocket and emergency-exit geometry.
- Dimensioned horizontal extents and wall-face endpoints for the Elevator 1 vestibule and Elevator 2 Broadway foyer thresholds.
- Elevator 3 ramp length, slope, threshold build-up and exact landing boundary at EL. 93.25 and EL. 95.33.
- Registered sill/head coordinates and independent correspondence to W3 landing traces.
- As-built confirmation before accepting vertical shaft or landing continuity.
- Accepted physical host-wall face and thickness
- Exact entrance depth relative to the W229 clear-hatch edge
- Rough opening and operating clear width/height
- Jamb, reveal, frame, sill, threshold and door-leaf construction
- Complete shaft, cab, guide, pit, overhead and machinery transforms
- Independent as-built check
- Exact outside wall face, verticality to second-floor datum, wall thickness, openings, loading-bay construction and local facade projections
- Remaining details and notes
- Vertical stone-face continuation and local projections
- Full wall construction thickness
- Architectural reveal/window sections
- Complete drawing-note transcription
- Every dimension and bay placement
- Detailed hardware/fastener schedule
- Exact cross-sheet bay correspondence
- Cross-photo physical deduplication
- Complete surviving-object inventory
- Exact dimensions
- Construction/alteration chronology
- Condition assessment
- P-6 component extraction
- Installed fixture schedule and positions
- As-built correspondence
- Fixture finish and glass color
- Accepted physical wall faces and thicknesses
- Complete Bay P jamb trace
- Exact stone/parapet boundary ownership throughout the flared plan
- Printed riser count and height
- Tread/riser/nosing construction profile
- Parapet thickness, coping and exact plan polygon
- Rail endpoints, extensions, posts and physical slope
- Flagpole placement and construction
- Independent as-built confirmation
- Accepted W3 registration
- Physical stair and rail construction
- Exact leaf height from a labeled sill-to-leaf-head chain
- Leaf thickness or closed section/profile, including the glazed portion
- Sill/threshold elevation and relation to the 93.24 exterior landing and 93.25 first-floor datum
- Accepted door-plane Z and host wall-face/reveal depth
- Leaf hinge/pivot axis and closed-position offset from the bay center
- Glazing thickness, panel build-up and hardware if detailed physical construction is attempted
- A readable first-floor W217 Section E or applicable companion section with front and back faces and exact profile/depth dimensions for one named component, plus complete width and height endpoints for that same component.
- Printed or independently checked panel extents before any ornament panels are given physical sizes; retain panel instances without fabricated dimensions until then.
- Classified first-floor host wall face, thickness and jamb/reveal/sill/head interfaces tied to named W229 or W230 controls and the corresponding W3 wall or Bay P station.
- An independent corresponding-face or endpoint residual within a stated tolerance for the chosen physical front, preserving conflicts and W3 trace uncertainty separately.
- segment-by-segment material and face classes
- accepted W3-to-detail endpoint/face registration with independent held-out check
- world XZ footprints and depths for each pier/screen segment
- six finished jamb X limits on each side plus rough openings and reveals
- door/head and transom limits
- checked threshold bottom and finished screen/pier top elevations
- resolution of the lobby ceiling reading conflict and scope
- accepted canonical XZ outer footprint
- finish-face and border-joint polygons, including counter recesses and door thresholds
- stone thickness, bedding thickness, substrate build-up and underside elevation
- room-specific spot elevation or checked threshold continuity
- accepted W-214 typical-bay to W3 placement
- individual slab sizes, joints and quantities
- Finish thicknesses, patterns, joint grids, heights other than the printed 5-foot mailing-vestibule wainscot, and construction layers are not established by these notes.
- The grouped Registry/C.O.D./Postal Savings/M.O./Stamps note applies by room label; it does not establish exact material boundaries where those spaces meet counters or vaults.
- The generic TOILET ROOMS note is applied only to two first-floor toilet identities present in the registered W3 topology; individual fixture placements remain unresolved.
- Elevator Hall No. 3 is correlated with the provisional Madison service-lobby identity, but its exact boundary and adjacency require a plan check.
- All room polygons and walls remain provisional; these categorical finishes are not physical Blender surfaces or a claim of complete sheet transcription.
- The remaining W3 notes, millwork schedule and every plan annotation outside the bounded note block remain to be transcribed.
- Exact per-room trim item inventory and faces
- finish layer thickness, veneer cut, stains, coatings and grain direction
- resolution of every unless-otherwise-noted exception against room/detail sheets
- full closet, storage, penthouse and interior-door instance crosswalk
- as-built finish verification
- directly classified W3/W214 corresponding bay-boundary faces or axes
- an independent dimensioned station tying U or one Q/Y endpoint to the Main column/door grid
- north-wall Z face and section thickness
- bay pier/return and opening cuts
- held-out source check against the same physical edge class rather than 2-foot-tolerance locators
- classified north/south finished face or axis and world Z control
- segment-by-segment thickness and joins
- accepted west/east pier or bay-division edge class
- finished jamb limits on both faces
- threshold bottom/top and door head in local Y
- finished upper screen and pier bounds
- independent held-out metric registration
- exact start/end XZ
- clear/structural width
- first and last tread edge classification
- nosing/profile
- riser-by-flight allocation
- landing interface
- structural thickness
- underside/soffit
- headroom
- intermediate landing boundary/elevation
- closed physical polygon
- finish and structural faces
- thickness
- checked landing elevation
- flight connection edges
- enclosure-wall interface
- closed slab-cut polygon
- classified slab edge versus wall or tread
- edge elevations
- slab thickness
- beam/landing-bearing interfaces
- checked W221/W3 registration
- Two classified finished host-wall face stations and a closed host segment
- Frame outer/inner face depths, actual section thickness and reveal return
- Accepted left/right finished frame jamb stations and rough opening limits
- Frame sill/threshold top and underside tied to the exterior landing and first-floor finish
- Frame head elevation and vertical transom/glazing limits
- Material/profile build-up for bronze frame and glass
- Accepted opening cut through the host wall and as-built correspondence
- installed fixture instance/count and W214-panel-to-WLF-246 type correspondence
- dimensioned A/B ceiling-grid station from a classified W3 or W214 plan control in X
- dimensioned lobby centerline and panel-row station in Z
- accepted W214 ceiling-grid to W3 transform with a held-out check
- actual suspension/ceiling anchor within the panel rather than merely somewhere below it
- resolved public-lobby height and finished coffer/anchor Y surface
- P-5 overall diameter and canopy-to-bottom drop, or independently dimensioned P-6 envelope
- fixture orientation and clearance to beams, cornice, openings and occupied space
- Every remaining dimension, schedule, callout and companion detail needs region review; no accepted physical/world geometry.
- Source-local applicability, construction thicknesses, complete object inventory and as-built correspondence remain unresolved.
- Exact installed quantities and type-to-instance assignment
- Rough/finished/structural endpoint classes, complete host outline and source-to-building registration
- Governing original/revision and companion-detail authority; no accepted physical geometry
- All uninspected source regions, notes, schedules and companion details; whole source remains partial
- Accepted finish/rough/structural endpoint classes and source-to-building transform absent
- All physical construction layers, exact material limits, installed quantities and as-built correspondence unresolved
- Remaining fine chains, schedules, callouts, revisions and companion details require review; exhaustive extraction not certified
- Classified finish/rough/structural faces, closed boundaries and source-to-building registration
- Original/revision authority, companion details and as-built correspondence
- All unreviewed regions, notes, schedules and callouts; no whole-source completeness
- Full first-floor room/opening geometry, physical face classes, registrations and installations remain unresolved.
- Accepted source-to-building transform and like-for-like finished/rough/structural face classification
- Exact closed slab opening, landing perimeter and headroom
- Construction/rail/nosing detail and revision/as-built reconciliation
- All remaining unreviewed regions, notes, schedules and companion details
Download OCR observations (unverified)