← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs: 464
Identified objects: 4872
Verified printed values: 12046
Disputed values: 20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

IMG_1129 · Folder 191

DETAIL OF ELEVATOR #1 & TYPICAL DETAILS OF ELEVATOR ENCLOSURES

Sheet W229

Extraction: Reviewed · extraction partial. Bounded first-floor elevator audit: DETAIL OF ELEVATOR #1 & TYPICAL DETAILS OF ELEVATOR ENCLOSURES — note close-up. Bounded W217 confirmation: Existing verified extraction only; image not reopened in this bounded pass. W229 elevator reference-note region only; confirms that typical door and cab details are on W219, not W214. Partial timed visual review: Source-local printed evidence only; endpoint finish classes, installed locations and accepted geometry remain unresolved. Partial timed visual review: OCR and existing text packages searched before one sequential upright WebP inspection. Additive region review; existing verified properties reused, not copied. No accepted geometry or cross-floor connection. Partial timed visual review: Source-local printed detail evidence only; normalized regions refer to upright access image. Crop inspection does not establish full extraction. Partial timed visual review: Trap-door plan local dimension witnesses; generic plate, handle and single-leaf applicability findings reused from IMG_1126 companion report. Partial timed visual review: Selected original photographic layer; no revision authority or installed geometry accepted. Partial timed visual review: undefined Partial timed visual review: Source-local detail/region evidence only. Printed type/floor applicability does not establish installed occurrences.

Highlighted reading: 14 GAUGE METAL FACIA. Gauge note leader at sill underside; metal type unspecified, no thickness conversion.

Show every recorded property on this drawing →

Unresolved extraction work

Accepted world wall faces and exact shaft polygons for all three elevators
Registered relationship between W229/W230/W231 detail coordinates and W3 world coordinates
Rough-versus-finished enclosure wall planes and wall thicknesses
W217 title-block confirmation and exact endpoint interpretation for the 3'-6" and 6'-9 3/4" door readings
Exact first-floor Elevator 3 door width, height, jamb/head/sill and rough opening
Readable Elevator 3 vertical hatch/shaft witness
Car/cab/platform sizes, rail/counterweight coordinates, pit depths and overhead clearances
Accepted ramp length, slope and threshold build-up at Elevator 3
Architecturally accepted reconciliation of all floor traces, especially the fourth-floor mechanical underlay
Operating clear width and height after door travel
Rough opening width and height
Sill, threshold and head sections/build-up
Individual leaf widths, thicknesses, overlap and travel
Outer ornamental-surround dimensions
Wall-face assignment and wall thickness
Registered world position and orientation
Remaining fine dimension chains and fractions
Companion detail and revision reconciliation
Installed instance and world-coordinate registration
Fine fractions and full dimension chains remain partially unreviewed
Endpoint classification and companion detail reconciliation
Source-to-building instance registration and accepted connections
Remaining fine fractions, notes and full region coverage
Installed floor/room instance and world-coordinate registration
Trap fine fractions and all connection notes
All remaining doorway regions
Floor-plan chain witnesses
Installed registration
All-region coverage
Installed occurrence, room identity and source-to-building registration
Original/revision authority and as-built correspondence
Complete member profiles, fixing stations and quantities
Architectural acceptance and physical geometry remain withheld
First/sixth-floor variants and clipped plan strips reused without dimensional re-extraction
Accepted enclosure applicability kept in prior exact IDs
The W217 nominal3ft6in by6ft9¾in doorway, metal ornament and indicator questions refer to IMG1097 detail pixels; IMG1129 supplies companion references only and cannot close/confirm those witnesses.
Trap fixing diameter/thread and sill bolt length remain unresolved. Aluminum note applies to specified first-floor Elevator3 sill only; no material change inferred for other entrances.
Complete fine dimensions, profiles, materials, finishes, gauges and fastener schedules remain partial.
Installed quantities, room/storey allocation, governing revision and companion applicability remain unresolved.
Source-to-building transforms, rough/finish endpoint classes, complete openings and independent physical checks remain outstanding; authoring is withheld.
Remaining fine fractions, complete member profiles, fastener sizes/materials and finish extents require targeted source review.
Installed room/floor identity, exact rough/finish/cab/rail endpoints and companion registration remain unresolved.
Source-to-building transform, installed quantities, independent physical connections and architectural acceptance remain withheld.
Left machine-room and floor-plan views truncated; rightmost head/jamb/sill geometry and fine fractions require larger targeted crop.
Trap plate/frame fractions remain unresolved; source lacks installed fixing station schedule.

Download OCR observations (unverified)

Loading the selected drawing…

Scroll or pinch to inspect this drawing. The gold outline locates the selected reading. Archival drawing photograph · Oregon Historical Society research collections.

Open source image separately ↗

1 matching properties

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

door-img1126-later-head-jambverified · printed

later_sill_metal_fascia_gauge

14 GAUGE METAL FACIA

14 gauge

Gauge note leader at sill underside; metal type unspecified, no thickness conversion.

IMG_1129 · W-229 · Locate on drawing ↗

Drawing notation: 14 GAUGE METAL FACIA

Gauge note leader at sill underside; metal type unspecified, no thickness conversion.

View all source photographs →