IMG_1129 · Folder 191DETAIL OF ELEVATOR #1 & TYPICAL DETAILS OF ELEVATOR ENCLOSURES
Sheet W229
Extraction: Reviewed · extraction partial. Bounded first-floor elevator audit: DETAIL OF ELEVATOR #1 & TYPICAL DETAILS OF ELEVATOR ENCLOSURES — note close-up. Bounded W217 confirmation: Existing verified extraction only; image not reopened in this bounded pass. W229 elevator reference-note region only; confirms that typical door and cab details are on W219, not W214. Partial timed visual review: Source-local printed evidence only; endpoint finish classes, installed locations and accepted geometry remain unresolved. Partial timed visual review: OCR and existing text packages searched before one sequential upright WebP inspection. Additive region review; existing verified properties reused, not copied. No accepted geometry or cross-floor connection. Partial timed visual review: Source-local printed detail evidence only; normalized regions refer to upright access image. Crop inspection does not establish full extraction. Partial timed visual review: Trap-door plan local dimension witnesses; generic plate, handle and single-leaf applicability findings reused from IMG_1126 companion report. Partial timed visual review: Selected original photographic layer; no revision authority or installed geometry accepted. Partial timed visual review: undefined Partial timed visual review: Source-local detail/region evidence only. Printed type/floor applicability does not establish installed occurrences.
Highlighted reading: ¼″ CHECKERED STEEL PLATE. Separate numeric printed plate fraction at R-R/S-S trap sections. Same photographic layer; no installed leaf thickness or applicability beyond source detail.
Show every recorded property on this drawing →
Unresolved extraction work
- Accepted world wall faces and exact shaft polygons for all three elevators
- Registered relationship between W229/W230/W231 detail coordinates and W3 world coordinates
- Rough-versus-finished enclosure wall planes and wall thicknesses
- W217 title-block confirmation and exact endpoint interpretation for the 3'-6" and 6'-9 3/4" door readings
- Exact first-floor Elevator 3 door width, height, jamb/head/sill and rough opening
- Readable Elevator 3 vertical hatch/shaft witness
- Car/cab/platform sizes, rail/counterweight coordinates, pit depths and overhead clearances
- Accepted ramp length, slope and threshold build-up at Elevator 3
- Architecturally accepted reconciliation of all floor traces, especially the fourth-floor mechanical underlay
- Operating clear width and height after door travel
- Rough opening width and height
- Sill, threshold and head sections/build-up
- Individual leaf widths, thicknesses, overlap and travel
- Outer ornamental-surround dimensions
- Wall-face assignment and wall thickness
- Registered world position and orientation
- Remaining fine dimension chains and fractions
- Companion detail and revision reconciliation
- Installed instance and world-coordinate registration
- Fine fractions and full dimension chains remain partially unreviewed
- Endpoint classification and companion detail reconciliation
- Source-to-building instance registration and accepted connections
- Remaining fine fractions, notes and full region coverage
- Installed floor/room instance and world-coordinate registration
- Trap fine fractions and all connection notes
- All remaining doorway regions
- Floor-plan chain witnesses
- Installed registration
- All-region coverage
- Installed occurrence, room identity and source-to-building registration
- Original/revision authority and as-built correspondence
- Complete member profiles, fixing stations and quantities
- Architectural acceptance and physical geometry remain withheld
- First/sixth-floor variants and clipped plan strips reused without dimensional re-extraction
- Accepted enclosure applicability kept in prior exact IDs
- The W217 nominal3ft6in by6ft9¾in doorway, metal ornament and indicator questions refer to IMG1097 detail pixels; IMG1129 supplies companion references only and cannot close/confirm those witnesses.
- Trap fixing diameter/thread and sill bolt length remain unresolved. Aluminum note applies to specified first-floor Elevator3 sill only; no material change inferred for other entrances.
- Complete fine dimensions, profiles, materials, finishes, gauges and fastener schedules remain partial.
- Installed quantities, room/storey allocation, governing revision and companion applicability remain unresolved.
- Source-to-building transforms, rough/finish endpoint classes, complete openings and independent physical checks remain outstanding; authoring is withheld.
- Remaining fine fractions, complete member profiles, fastener sizes/materials and finish extents require targeted source review.
- Installed room/floor identity, exact rough/finish/cab/rail endpoints and companion registration remain unresolved.
- Source-to-building transform, installed quantities, independent physical connections and architectural acceptance remain withheld.
- Left machine-room and floor-plan views truncated; rightmost head/jamb/sill geometry and fine fractions require larger targeted crop.
- Trap plate/frame fractions remain unresolved; source lacks installed fixing station schedule.
Download OCR observations (unverified)