← Back to the building1933 reconstruction · research preview

The measured building.

Every dimension belongs to an object and a drawing. Original room numbers, object marks, printed values and source regions stay together—even when the answer is unresolved.

Source photographs: 464
Identified objects: 4872
Verified printed values: 12046
Disputed values: 20

464 of 464 photographs have extraction records, containing 27,517 properties. Initial image review is not exhaustive extraction: 0 photographs have passed the full-region check. 66 numbered sheets are reconciled. Modeling and architectural registration are separate work; these counts do not establish a complete building.

Download the structured register (JSON)

Open the coordinated research model →

IMG_1129 · Folder 191

DETAIL OF ELEVATOR #1 & TYPICAL DETAILS OF ELEVATOR ENCLOSURES

Sheet W229

Extraction: Reviewed · extraction partial. Bounded first-floor elevator audit: DETAIL OF ELEVATOR #1 & TYPICAL DETAILS OF ELEVATOR ENCLOSURES — note close-up. Bounded W217 confirmation: Existing verified extraction only; image not reopened in this bounded pass. W229 elevator reference-note region only; confirms that typical door and cab details are on W219, not W214. Partial timed visual review: Source-local printed evidence only; endpoint finish classes, installed locations and accepted geometry remain unresolved. Partial timed visual review: OCR and existing text packages searched before one sequential upright WebP inspection. Additive region review; existing verified properties reused, not copied. No accepted geometry or cross-floor connection. Partial timed visual review: Source-local printed detail evidence only; normalized regions refer to upright access image. Crop inspection does not establish full extraction. Partial timed visual review: Trap-door plan local dimension witnesses; generic plate, handle and single-leaf applicability findings reused from IMG_1126 companion report. Partial timed visual review: Selected original photographic layer; no revision authority or installed geometry accepted. Partial timed visual review: undefined Partial timed visual review: Source-local detail/region evidence only. Printed type/floor applicability does not establish installed occurrences.

Unresolved extraction work

Accepted world wall faces and exact shaft polygons for all three elevators
Registered relationship between W229/W230/W231 detail coordinates and W3 world coordinates
Rough-versus-finished enclosure wall planes and wall thicknesses
W217 title-block confirmation and exact endpoint interpretation for the 3'-6" and 6'-9 3/4" door readings
Exact first-floor Elevator 3 door width, height, jamb/head/sill and rough opening
Readable Elevator 3 vertical hatch/shaft witness
Car/cab/platform sizes, rail/counterweight coordinates, pit depths and overhead clearances
Accepted ramp length, slope and threshold build-up at Elevator 3
Architecturally accepted reconciliation of all floor traces, especially the fourth-floor mechanical underlay
Operating clear width and height after door travel
Rough opening width and height
Sill, threshold and head sections/build-up
Individual leaf widths, thicknesses, overlap and travel
Outer ornamental-surround dimensions
Wall-face assignment and wall thickness
Registered world position and orientation
Remaining fine dimension chains and fractions
Companion detail and revision reconciliation
Installed instance and world-coordinate registration
Fine fractions and full dimension chains remain partially unreviewed
Endpoint classification and companion detail reconciliation
Source-to-building instance registration and accepted connections
Remaining fine fractions, notes and full region coverage
Installed floor/room instance and world-coordinate registration
Trap fine fractions and all connection notes
All remaining doorway regions
Floor-plan chain witnesses
Installed registration
All-region coverage
Installed occurrence, room identity and source-to-building registration
Original/revision authority and as-built correspondence
Complete member profiles, fixing stations and quantities
Architectural acceptance and physical geometry remain withheld
First/sixth-floor variants and clipped plan strips reused without dimensional re-extraction
Accepted enclosure applicability kept in prior exact IDs
The W217 nominal3ft6in by6ft9¾in doorway, metal ornament and indicator questions refer to IMG1097 detail pixels; IMG1129 supplies companion references only and cannot close/confirm those witnesses.
Trap fixing diameter/thread and sill bolt length remain unresolved. Aluminum note applies to specified first-floor Elevator3 sill only; no material change inferred for other entrances.
Complete fine dimensions, profiles, materials, finishes, gauges and fastener schedules remain partial.
Installed quantities, room/storey allocation, governing revision and companion applicability remain unresolved.
Source-to-building transforms, rough/finish endpoint classes, complete openings and independent physical checks remain outstanding; authoring is withheld.
Remaining fine fractions, complete member profiles, fastener sizes/materials and finish extents require targeted source review.
Installed room/floor identity, exact rough/finish/cab/rail endpoints and companion registration remain unresolved.
Source-to-building transform, installed quantities, independent physical connections and architectural acceptance remain withheld.
Left machine-room and floor-plan views truncated; rightmost head/jamb/sill geometry and fine fractions require larger targeted crop.
Trap plate/frame fractions remain unresolved; source lacks installed fixing station schedule.

Download OCR observations (unverified)

Loading the selected drawing…

Scroll or pinch to inspect this drawing. Archival drawing photograph · Oregon Historical Society research collections.

Open source image separately ↗

49 matching properties

Printed values, calculations, image traces and observed counts are different kinds of evidence. “Verified” applies to the specific reading—not to the whole room or model.

door-img1126-later-head-jambverified · printed

later_sill_lockwasher_relationship

NUT & LOCK WASHERS ON BOTH SIDES

Readable washer relationship within sill bolt note; no numerical quantity or bolt size inferred.

IMG_1129 · W-229 · Locate on drawing ↗

Drawing notation: NUT & LOCK WASHERS ON BOTH SIDES

Readable washer relationship within sill bolt note; no numerical quantity or bolt size inferred.

door-img1126-later-head-jambverified · printed

later_sill_metal_fascia_gauge

14 GAUGE METAL FACIA

14 gauge

Gauge note leader at sill underside; metal type unspecified, no thickness conversion.

IMG_1129 · W-229 · Locate on drawing ↗

Drawing notation: 14 GAUGE METAL FACIA

Gauge note leader at sill underside; metal type unspecified, no thickness conversion.

door-img1126-later-head-jambverified · printed

later_sill_metal_fascia_material

14 GAUGE METAL FACIA

Printed generic metal fascia; do not assign steel solely from nearby head fascia.

IMG_1129 · W-229 · Locate on drawing ↗

Drawing notation: 14 GAUGE METAL FACIA

Printed generic metal fascia; do not assign steel solely from nearby head fascia.

door-img1126-later-head-jambunreviewed · printed

elevator3_sill_exception_material

[NOTE: SILL AT ELEV.3 AT DOOR ...] ANTI-SLIP ALUMINUM

Readable aluminum material in jamb note; intervening floor/door applicability phrase remains unresolved, so no floor assignment.

IMG_1129 · W-229 · Locate on drawing ↗

Drawing notation: [NOTE: SILL AT ELEV.3 AT DOOR ...] ANTI-SLIP ALUMINUM

Readable aluminum material in jamb note; intervening floor/door applicability phrase remains unresolved, so no floor assignment.

door-img1126-later-head-jambverified · printed

elevator3_first_floor_sill_material_exception

NOTE: SILL AT ELEV. 3 AT 1ST FL. TO BE ANTI-SLIP ALUMINUM

Same original printed jamb/sill note as elevator1013p-1129-017. The phrase is1ST FL., not a door-number or unassigned floor. Resolves this note's material and first-floor applicability only; no installation, alloy, surface pattern, dimensions or revision choice.

IMG_1129 · W-229 · Locate on drawing ↗

Drawing notation: NOTE: SILL AT ELEV. 3 AT 1ST FL. TO BE ANTI-SLIP ALUMINUM

door-img1126-later-head-jambverified · printed

shared_enclosure_applicability_elevators_1_2

TYPICAL DETAIL OF ELEVATOR ENCLOSURE FOR ELEVATORS #1 & #2 FOR BASEMENT,2ND TO5TH FLOORS(INCLUSIVE),AND FOR7TH FLOOR

Shared later enclosure applies to these explicitly printed levels for elevators1/2. First-floor and sixth-floor details remain separate variants.

IMG_1129 · W-229 · Locate on drawing ↗

Drawing notation: TYPICAL DETAIL OF ELEVATOR ENCLOSURE FOR ELEVATORS #1 & #2 FOR BASEMENT,2ND TO5TH FLOORS(INCLUSIVE),AND FOR7TH FLOOR

Shared later enclosure applies to these explicitly printed levels for elevators1/2. First-floor and sixth-floor details remain separate variants.

door-img1126-later-head-jambverified · printed

shared_enclosure_applicability_elevator_3

ALSO FOR ELEVATOR #3 FOR BASEMENT TO7TH FLOORS INCLUSIVE

Printed type applicability includes Elevator3 basement through7; no evidence that1/2 first- or sixth-floor variant also applies to3.

IMG_1129 · W-229 · Locate on drawing ↗

Drawing notation: ALSO FOR ELEVATOR #3 FOR BASEMENT TO7TH FLOORS INCLUSIVE

Printed type applicability includes Elevator3 basement through7; no evidence that1/2 first- or sixth-floor variant also applies to3.

door-img1126-later-head-jambverified · printed

sill_anchor_field_drilling_note

DRILL ANCHORS IN FIELD

Field drilling note in common sill section; hole/anchor sizes, spacing and installed stations unresolved.

IMG_1129 · W-229 · Locate on drawing ↗

Drawing notation: DRILL ANCHORS IN FIELD

Field drilling note in common sill section; hole/anchor sizes, spacing and installed stations unresolved.

door-img1126-later-head-jambverified · printed

sill_anchor_to_steel_beam_relationship

BENT ANGLE ANCHORS TO STEEL I BEAM IN AN APPROVED MANNER [size prefix unresolved]

Anchor is related to structural steel I-beam in common sill section. Approved manner is not an extracted fastening specification; size prefix withheld.

IMG_1129 · W-229 · Locate on drawing ↗

Drawing notation: BENT ANGLE ANCHORS TO STEEL I BEAM IN AN APPROVED MANNER [size prefix unresolved]

Anchor is related to structural steel I-beam in common sill section. Approved manner is not an extracted fastening specification; size prefix withheld.

View all source photographs →